Characterization of anisotropic gas permeability and thermomechanical properties of highly textured porous alumina

Porous alumina with a highly textured microstructure was fabricated by pulse electric current sintering (PECS) using alumina platelets. Highly oriented porous alumina with a porosity of 3%–50% was obtained by a pressure-controlled method of PECS. The properties of the highly textured porous alumina were measured in two directions. The nitrogen gas permeance and thermal conductivity at room temperature were higher in the direction along the platelet length due to the higher continuity of pores and the connectivity of alumina platelets, respectively. The anisotropy of the thermal conductivity at room temperature was investigated and explained by the effect of grain size of platelets as well as morphology and orientation of pores. The bending strength was higher with the loading direction along the platelet thickness. The thermal shock strength was clearly different in the two directions. The difference in the thermal shock strength was investigated by the measurement of properties and thermal stress analysis.     

Improved visible-light responsive photocatalytic activity of N and Si co-doped titanias

Thermal reaction of titanium tetraisopropoxide and tetraethyl orthosilicate in 1,4-butanediol afforded nanocrystalline silica-modified titanias having large surface area and superior thermal stability. In this study, the thus-obtained silica-modified titanias were treated in an NH₃ flow at high temperatures, and their physical and photocatalytic properties were investigated. Compared with NH₃-treated TiO₂ without silica modification, the NH₃-treated silica-modified titanias showed a stronger absorption in the visible region (400–500 nm) and had a larger peak at 396 eV in the N 1s XPS spectrum. These results indicate that a larger amount of nitrogen was stably doped in the silica-modified titania. The obtained products exhibited a high photocatalytic activity for degradation of Rhodamine B and decomposition of acetaldehyde under visible light irradiation. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

An expert system for XPLE cable deterioration diagnosis and life forecasting

The recent increase in the demand for power in urban areas has caused changes in the way power is supplied. Underground distribution systems have been introduced for convenience in urban areas and to prevent injuries in case of a crisis. As a result, many new types of power cables are being used. One type, XPLE cables (also called CV cables) have been rapidly taking the place of conventional cables such as OF or SL cables since the 1960s because of their relatively easy installation and maintainability. However, distribution cables used under severe environmental conditions deteriorate rapidly (due mainly to water treeing), and some cables experience insulation breakdown. Therefore, many diagnostic methods have been developed, though they have not been very effective. By combining methods, a high reliability can be achieved in comparison to the use of a single method. However, processing the data is difficult for on-site personnel, so many experts are required. But there is a lack of qualified experts, hence we have turned to the development of expert systems.     

Analysis of the IgE-epitope of Der f 2, a major mite allergen, by in vitro mutagenesis

Der f 2 is a major mite allergen composed of 129 amino acid residues. To determine the major epitopes on Der f 2 recognized by human IgE antibodies, artificial mutations were introduced to Der f 2 protein. The IgE-binding activity of Der f 2 was significantly decreased by deletion of 10 amino acids at the N-terminus or nine amino acids at the C-terminus. Site-directed mutagenesis with a single amino acid replacement by Ala or Leu in both N- and C-terminal regions as well as a central portion was performed to generate 42 single-site mutations. Amino acid replacement around a disulfide bond of Cys8-Cys119 caused a marked decrease in IgE-binding activity. Furthermore, a distinct decrease in IgE-binding was also caused by Ala-substitution close to a disulfide bond of Cys73-Cys78 and by mutations of a few charged residues. From these results, it was concluded that the two disulfide-forming regions of Der f 2 and several charged residues are important for forming major epitope structures recognized by human IgE antibodies.     

Ormosil coatings of high hardness

Organically modified silicates (ormosils) of two systems were coated on polyethyleneterephthalate (PET) substrates. One was the tetraethoxysilane (TEOS)-vinyltriethoxysilane (VTES) system and the other was the TEOS-tetraisopropyltitanate (TIPT)-VTES system. The reactions among the alkoxides were examined by liquid state ²⁹Si nuclear magnetic resonance (NMR) spectroscopy. The chemical bonds between TEOS and VTES, between TEOS and TIPT, and between VTES and TIPT are shown in the spectra and the reaction schemes are proposed. Vickers hardnesses of the ormosil coatings were obtained by using the models developed by Jönsson and Hogmark, and the theoretical models developed by the authors were valuable to predict the hardness values. The ormosil coatings obtained in the present study were much harder than the hardest transparent plastics, and thus are very useful for hard or protective coatings on organic polymers.     

Heavy arsenic doping of silicon grown by atmospheric pressure selective epitaxial chemical vapor deposition

Selective epitaxial Si with a high arsenic concentration of 2.2×10¹⁹ atoms/cm³ was deposited at a high growth rate of 3.3 nm/min under atmospheric pressure. It was confirmed that this method had excellent selectivity and produced films having good crystalline quality, abrupt dopant profiles at the interfaces, and smooth surfaces. The growth mechanism is discussed in terms of the relationship between the effects of arsenic surface segregation and etching by hydrogen chloride.     

Breed differences in the histochemical properties of the M. pubo-ischio-femoralis pars medialis myofibre of domestic cocks

1. Histochemical properties of M. pubo-ischio-femoralis pars medialis (PIF muscle) were compared in 7 breeds of cocks. This muscle was largely composed of Type I fibres and their transitional form (Type I tr). Type IIA fibres were observed in the cranial part. 2. The weight and cross-sectional area of the PIF muscle increased with increasing body weight. However, the relative muscle development to body weight differed among the 7 breeds. 3. A quarter of Type I fibres were of the transitional variety in bantam fowls. Conversely, few, if any, Type I tr fibres were observed in the large breeds where the muscle was poorly developed. 4. As the histochemical properties of Type I fibres made an effective response to the different body weights and the relative PIF muscle development among breeds, it was concluded that PIF muscle performed an important function in supporting the body weight and maintaining posture.     

Thermal shock resistance of flat plastic integrated circuit packages

Flat packages (FPs) were formed from epoxy molding compounds with various physical properties using a transfer molding machine. The compounds were prepared by changing kinds and amounts of additives and addition methods. The thermal shock test was carried out by the following procedures. The plastic package was soaked alternately in liquid nitrogen (?196°) and in liquid solder (200°) in the cycle of 140s. The median life to crack initiation was defined to be the cycles when half of the specimens exhibited crack initiation. According to linear fracture mechanics, the following expression was obtained relating the median life N, thermal stress σ_t, and strength σ_b; N = C/σ·(σ_b/σ_t)^m. We found the linear relation between logarithm of Nσ and logarithm of σ_b/σ_t for various packages, and estimated the values of C and m as 5 × 10⁴ MPa² and 5.5, respectively. The value of m was the same as that obtained for a dual-in-line package.     

Deposition of dense isotropic carbon from acetylene in fluidized bed

Pyrolytic carbon was deposited from acetylene in a fluidized bed at 1100°C on alumina microspheres. In case when only argon was used as the diluent gas, density and BAF of the deposit decreased and deposition yield increased with increasing acetylene concentration. Hydrogen sypply suppressed carbon formation and, consequently, caused an increase in density and Lc. BAF was relatively independent of hydrogen concentration. It was found that high density, isotropic carbon can be deposited from acetylene at 1100°C, if an appropriate proportion of hydrogen is added.