Influence of the processing parameters and composition on the thermal stability of PLA/nanoclay bio‐nanocomposites

Poly(lactic acid) (PLA) is one the most promising bio‐based and biodegradable polymer. However, its low thermal stability limits the range of applications and complicates its transformation via the most industrial common processes. The novelty of this work is studying the thermal stability of PLA and PLA/clay nanocomposites during use, as a function of the composition and using a wide range of extrusion and injection moulding processing parameters. To improve the thermal stability of the PLA, laminar silicates containing different organomodifications have been added (Cloisite 20A and Cloisite 30B). The results show that the processing conditions and composition define the morphology of the bio‐nanocomposites, which plays key role in defining final thermal properties of the material. In general, clays improve the thermal stability of the processed material, increasing the degradation temperature and decreasing the degradation rate under a wide range of processing conditions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40747.     

Lithium Phosphonate Functionalized Polymer Coating for High-Energy Li[Ni0.8Co0.1Mn0.1]O2 with Superior Performance at Ambient and Elevated Temperatures

High-energy Ni-rich lithium transition metal oxides such as Li[Ni_0.8Co_0.1Mn_0.1]O₂ (NCM₈₁₁) are appealing positive electrode materials for next-generation lithium batteries. However, the high sensitivity toward moist air during storage and the high reactivity with common organic electrolytes, especially at elevated temperatures, are hindering their commercial use. Herein, an effective strategy is reported to overcome these issues by coating the NCM₈₁₁ particles with a lithium phosphonate functionalized poly(aryl ether sulfone). The application of this coating allows for a substantial reduction of lithium-based surface impurities (e.g., LiOH, Li₂CO₃) and, generally, the suppression of detrimental side reactions upon both storage and cycling. As a result, the coated NCM₈₁₁-based cathodes reveal superior Coulombic efficiency and cycling stability at ambient and, particularly, at elevated temperatures up to 60 ° C (a temperature at which the non-coated NCM₈₁₁ electrodes rapidly fail) owing to the formation of a stable cathode electrolyte interphase with enhanced Li⁺ transport kinetics and the well-retained layered crystal structure. These results render the herein presented coating strategy generally applicable for high-performance lithium battery cathodes.     

Teaching model-driven engineering from a relational database perspective

We reinterpret MDE from the viewpoint of relational databases to provide an alternative way to understand, demonstrate, and teach MDE using concepts and technologies that should be familiar to undergraduates. We use (1) relational database schemas to express metamodels, (2) relational databases to express models, (3) Prolog to express constraints and M2M transformations, (4) Java tools to implement M2T and T2M transformations, and (5) Java to execute transformations. Application case studies and a user study illuminate the viability and benefits of our approach.     

Surface functionalization of polyolefin films via the ultraviolet‐induced photografting of acrylic acid: Topographical characterization and ability for binding antifungal agents

The photoinduced graft copolymerization of acrylic acid with ultraviolet radiation onto films of poly(vinyl chloride), polypropylene, and polyethylene was studied. Benzophenone was used as the initiator for most of the experiments performed. The percentage of grafting was determined by gravimetric measurements, and the characterization of the grafted films was carried out by chemical analysis (Fourier transform infrared spectroscopy, volumetric titration, and dye adsorption). In all samples, the grafted yield increased with the ultraviolet exposure time. High levels of grafting were obtained at room temperature. In addition, optical and atomic force microscopy allowed the topography of the modified films to be studied as a function of the reaction time. The pendant functional groups that were grafted were then used to bind antifungal agents, such as natamycin and crystal violet, and the antifungal properties of the films were demonstrated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:2254–2263, 2006     

Relationship between the network morphology and properties of commercial vinyl ester resins

Two commercial vinyl ester resins, Derakane 411‐350 (resin D) and Derakane 411‐350 Momentum (resin M), were characterized. Despite the large quantity of publications in the literature about vinyl ester resins, few experimental results have been reported for resin M. The effect of the styrene content on the mechanical properties and morphological structure was studied. An increase in the styrene content produced a network with a low storage modulus in the rubber state and a glass‐transition temperature. The apparent average molecular weight between crosslink points and glass‐transition temperature were slightly higher for resin D than for resin M. The Fourier transform infrared spectra and molecular weight distributions were similar. However, resin M was tougher than resin D, and this may have been due to the closer structure in the fully cured state. Atomic force microscopy was performed for each cured resin and confirmed the difference in the nanostructures. The main reason for the differences in the developed structures was the use of an accelerator, which influenced the final morphology. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3895–3903, 2006     

Hyperprogressive Disease: Main Features and Key Controversies

Along with the positioning of immunotherapy as a preferential treatment for a wide variety of neoplasms, a new pattern of response consisting in a sudden acceleration of tumor growth has been described. This phenomenon has received the name of “hyperprogressive disease”, and several definitions have been proposed for its identification, most of them relying on radiological criteria. However, due to the fact that the cellular and molecular mechanisms have not been elucidated yet, there is still some debate regarding whether this fast progression is induced by immunotherapy or only reflects the natural course of some highly aggressive neoplasms. Moreover, contradictory results of trials including patients with different cancer types suggest that both the incidence, the associated factors and the implications regarding prognosis might differ depending on tumor histology. This article intends to review the main publications regarding this matter and critically approach the most controversial aspects.     

Application of in-line viscometer for in-process monitoring of microcrystalline cellulose-carboxymethylcellulose hydrogel formation during batch manufacturing

Physical stability and consistent dose delivery of pharmaceutical suspension formulations comprised of microcrystalline cellulose (MCC) and sodium carboxymethylcellulose (NaCMC) hydrogels is dependent on their rheological properties. To obtain the desired rheological characteristics, good control of the hydrogel dispersion in water is required. The goal of this study was to evaluate whether the XL7-100 Process Viscometer could be employed as a process analytical technology (PAT) tool to monitor the dispersion process in real time during batch manufacturing. Using this instrument, viscosity profiles were measured during the hydrogel processing for a range of operating conditions. It was confirmed that viscosity obtained by the XL7-100 Process Viscometer in the off-line mode, could be linearly correlated to that of the conventional Brookfield viscometer. In addition, the XL7-100 Process Viscometer was able to detect variations in the hydrogel concentrations as well as process conditions in real time. Under fixed operating conditions, the dynamic viscosity profile showed low variability and good inter-batch reproducibility for a properly dispersed hydrogel. For a well-validated mixing process, an off-trend in-line viscosity reading may be indicative of batch failure or poor dispersion homogeneity. Therefore, the in-line viscometer can be used in manufacturing to monitor the batch to batch consistency. However, it is not proven to be able to characterize the real-time structure formation of the hydrogel. It is recommended that the in-line viscometer be used as a complimentary tool along with the off-line rheometer for both efficient and effective in-process quality control of the MCC & NaCMC hydrogel dispersion.