Acidity and basicity of hydrotalcite derived mixed Mg-Al oxides studied by test reaction of MBOH conversion and temperature programmed desorption of NH3 and CO2

Mg-Al hydrotalcites intercalated with five different interlayer anions—CO₃²⁻, SO₄²⁻, Cl⁻, HPO₄²⁻ or terephthalate—were synthesized by either the coprecipitation or ion-exchange method. The structure of the as-synthesized samples and the presence of intended anions in the interlayer gallery of hydrotalcites were determined by X-ray diffraction and FTIR spectroscopy. On calcination at 600 °C the materials were transformed into mixed metal oxides. The kind of the counterbalancing anions present in the parent hydrotalcite influences strongly textural parameters of the obtained Mg-Al oxides. Both temperature-programmed desorption of NH₃ and CO₂, and test reaction of 2-methyl-3-butyn-2-ol (MBOH) conversion were used to determine the acidity and basicity of the samples. The hydrotalcite derived mixed Mg-Al oxides showed the presence of Brønsted and Lewis acid and base sites. However, the strong basic character of the solids caused that acetone and acetylene were observed as the major products of MBOH conversion.     

Selective oxidation of ammonia to nitrogen on transition metal containing mixed metal oxides

The selective catalytic oxidation of ammonia to nitrogen (NH₃-SCO) has been studied over hydrotalcite derived mixed metal oxides containing Cu, Co, Fe or Ni. XRD, BET, NH₃-TPD and TPR techniques were used for catalysts characterization. Results of NH₃-SCO were compared with those of selective catalytic reduction of NO with NH₃ (NO-SCR). Reaction mechanism was studied by temperature-programmed surface reaction (TPSR) and activity tests with a various contact time. Catalytic performance of the studied samples depends on both kind and loading of transition metals in the mixed metal oxide system. The Cu-containing samples have been found to be the most active catalysts of the NH₃-SCO process. Transition metal loading strongly influences distribution of ammonia oxidation products. The highest selectivity to N₂ was measured for the catalysts with the lowest transition metal content.     

Quality assessment for a visual and automatic license plate recognition

Video transmission and analysis is often utilized in applications outside of the entertainment sector, and generally speaking this class of video is used to perform specific tasks. Examples of these applications include security and public safety. The Quality of Experience (QoE) concept for video content used for entertainment differs significantly from the QoE of surveillance video used for recognition tasks. This is because, in the latter case, the subjective satisfaction of the user depends on achieving a given functionality. Recognizing the growing importance of video in delivering a range of public safety services, we focused on developing critical quality thresholds in license plate recognition tasks based on videos streamed in constrained networking conditions. Since the number of surveillance cameras is still growing it is obvious that automatic systems will be used to do the tasks. Therefore, the presented research includes also analysis of automatic recognition algorithms.     

Unconventional fractional quantum Hall effect in monolayer and bilayer graphene

The commensurability condition is applied to determine the hierarchy of fractional fillings of Landau levels in monolayer and in bilayer graphene. The filling rates for fractional quantum Hall effect (FQHE) in graphene are found in the first three Landau levels in one-to-one agreement with the experimental data. The presence of even denominator filling fractions in the hierarchy for FQHE in bilayer graphene is explained. Experimentally observed hierarchy of FQHE in the first and second Landau levels in monolayer graphene and in the zeroth Landau level in bilayer graphene is beyond the conventional composite fermion interpretation but fits to the presented nonlocal topology commensurability condition.     

Problem of stress and strain concentration in the entry and exit planes in the drawing process

The paper discusses the problem of stress and strain concentration in the entry and exit planes during the drawing process. Earlier investigations carried out by Pierlin, Pawelski and Armstroff as well as Chen and Kobayashi's finite element analysis are reviewed. Authors’ calculations based on the rigid-plastic finite element approach are compared with experimental and theoretical results published by Pawelski and Armstroff. Solution for rigid-plastic material behaviour confirmed the die pressure increase in the entry and exit zones questioning Pierlin's suggestion that the elastic strains are responsible for pressure concentrations. Analysis of the strain rate distribution led to the presumption that pressure increase is due to the strain rate concentrations in the areas close to the entry and exit zones.     

Porosity effect on microstructure,mechanical, and fluid dynamic properties of Ti2AlC by direct foaming and gel‐casting

In this study, Ti₂AlC foams were fabricated by direct foaming and gel‐casting using agarose as gelling agent. Slurry viscosity, determined by the agarose content (at a fixed solids loading), as well as surfactant concentration and foaming time were the key parameters employed for controlling the foaming yield, and hence the foam porosity after sintering process. Fabricated foams having total porosity in the 62.5‐84.4 vol% range were systematically characterized to determine their pore size and morphology. The effect of the foam porosity on the room‐temperature compression strength and elastic modulus was also determined. Depending on the amount of porosity, the compression strength and Young's modulus were found to be in the range of 9‐91 MPa and 7‐52 GPa, respectively. Permeability to air flow at temperatures up to 700°C was investigated. Darcian (k₁) and non‐Darcian (k₂) permeability coefficients displayed values in the range 0.30‐93.44 × 10^?11 m² and 0.39‐345.54 × 10^?7 m, respectively. The amount of porosity is therefore a very useful microstructural parameter for tuning the mechanical and fluid dynamic properties of Ti₂AlC foams.     

SBA-15 mesoporous silica modified with rhodium by MDD method and its catalytic role for N<Subscript>2</Subscript>O decomposition reaction

SBA-15 mesoporous silicas modified with rhodium were studied as catalysts for the N₂O decomposition reaction. Rhodium was deposited on SBA-15 by the Molecular Designed Dispersion (MDD) method using Rh(acac)₃ as a precursor of active phase. The same method was used for the deposition of Cu, Fe, Al and Ti. The SBA-15 support modified with metals were characterized with respect to metal loading (EPMA), structure (XRD), texture (BET), morphology (SEM), Rh dispersion (oxygen chemisorption), surface acidity (pyridine adsorption) and chemical nature of introduced copper and iron species (UV–vis-DRS). The rhodium-containing SBA-15 samples were found to be active catalysts for the N₂O decomposition reaction. Deposition of Al on the Rh-loaded catalyst increased its activity. An opposite effect was observed for the samples modified with Cu and Fe.     

Dyeing properties of CI Acid Blue 193 and the non‐equivalent properties of CI Acid Black 194 produced by different manufacturers

This paper presents the results of research conducted into the colour properties of commercial metal complex dyes CI Acid Blue 193 and CI Acid Black 194. Three chromium(III) complexes with different colours were identified using thin‐layer chromatographic analysis and then separated by preparative chromatography. It was found that colour differences of the examined dyes depend on the ratio of the three components in CI Acid Blue 193 and CI Acid Black 194, and that these differences are typical for each of the commercial products. The colour differences of the components were expressed as ΔS, calculated as the difference in the areas under the absorption curve of the individual components in the range 400–700 nm after spectrum normalisation. The UV‐vis spectroscopic and CIELAB colorimetric properties (at 1% owf on polyamide) of eleven samples of CI Acid Black 194 were investigated. From these results, the proportions of the three components were derived. Theoretically, dyes sold under the same CI name are interchangeable. In practice, the obtained colour of the dyed material is different owing to the difference in composition namely the ratio of the components in the tested dyes. Consequently, the result of polyamide dyeing with the studied dyes CI Acid Blue 193 and CI Acid Black 194 is a redder or greener hue. It has been concluded from these findings that the production of identical dyeings may be impossible when dyes from different sources are employed.