Decorative near-infrared transmission filters featuring high-efficiency and angular-insensitivity employing 1D photonic crystals

We present a new scheme for visibly-opaque but near-infrared-transmitting filters involving 7 layers based on one-dimensional ternary photonic crystals, with capabilities in reaching nearly 100% transmission efficiency in the near-infrared region. Different decorative reflection colors can be created by adding additional three layers while maintaining the near-infrared transmission performance. In addition, our proposed structural colors show great angular insensitivity up to ±60° for both transverse electric and transverse magnetic polarizations, which are highly desired in various fields. The facile strategy described here involves a simple deposition method for the fabrication, thereby having great potential in diverse applications such as image sensors, anti-counterfeit tag, and optical measurement systems.

     

Study of the corrosion and microstructure with annealing conditions of a β-quenched HANA-4 alloy

The variation of microstructure and corrosion characteristics with the applied annealing conditions of a HANA-4 (Zr-1.5Nb-0.4Sn-0.2Fe-0.1Cr) alloy were studied by utilizing transmission electron microscopy and a corrosion test at 360 °C in a water environment. The samples were annealed at temperature ranges from 540 to 660 °C up to 16 h after β quenching at 1050 °C. The corrosion behaviour with the annealing conditions was divided into two groups following the second phase characteristics. The suitable annealing temperature to obtain good corrosion resistance in the HANA-4 alloy ranged from 570 to 600 °C.     

Beneficial Effects of Melatonin Combined with Exercise on Endogenous Neural Stem/Progenitor Cells Proliferation after Spinal Cord Injury

Endogenous neural stem/progenitor cells (eNSPCs) proliferate and differentiate into neurons and glial cells after spinal cord injury (SCI). We have previously shown that melatonin (MT) plus exercise (Ex) had a synergistic effect on functional recovery after SCI. Thus, we hypothesized that combined therapy including melatonin and exercise might exert a beneficial effect on eNSPCs after SCI. Melatonin was administered twice a day and exercise was performed on a treadmill for 15 min, six days per week for 3 weeks after SCI. Immunohistochemistry and RT-PCR analysis were used to determine cell population for late response, in conjunction with histological examination and motor function test. There was marked improvement in hindlimb function in SCI+MT+Ex group at day 14 and 21 after injury, as documented by the reduced size of the spinal lesion and a higher density of dendritic spines and axons; such functional improvements were associated with increased numbers of BrdU-positive cells. Furthermore, MAP2 was increased in the injured thoracic segment, while GFAP was increased in the cervical segment, along with elevated numbers of BrdU-positive nestin-expressing eNSPCs in the SCI+MT+Ex group. The dendritic spine density was augmented markedly in SCI+MT and SCI+MT+Ex groups. These results suggest a synergistic effect of SCI+MT+Ex might create a microenvironment to facilitate proliferation of eNSPCs to effectively replace injured cells and to improve regeneration in SCI.     

Synergistic Effect of Excited State Property and Aggregation Characteristic of Organic Semiconductor on Efficient Hole-Transportation in Perovskite Device

Intrinsic characteristics of organic semiconductor-based hole transport materials (HTMs) such as facile synthesizability, energy level tunability, and charge transport capability have been highlighted as crucial factors determining the performances of perovskite photovoltaic (PV) cells. However, their properties in the excited state have not been actively studied, although PVs are operated under solar illumination. Here, the characteristics of organic HTMs in their excited state such as transition dipole moment can be a decisive factor that can improve built-in potential of PVs, consequently enhancing their charge extraction property as well as reducing carrier recombination. Moreover, the aggregation property of organic semiconductors, which has been an essential factor for high-performance organic HTMs to improve their carrier transport property, can induce a synergistic effect with their excited state property for the high-efficiency perovskite PVs. Additionally, it is also confirmed that their optical bandgaps, manipulated to have their absorption in the UV region, are beneficial to block UV light that degrades the quality of perovskite, consequently improving the stability of perovskite PV in p–i–n configuration. As a proof-of-concept, a model system, composed of triarylamine and imidazole-based organic HTMs, is designed, and it is believed that this strategy paves a way toward high-performance and stable perovskite PV devices.     

Oxide thickness-dependent transient cladding hoop stress

A few thrice-burned Zry-4 fuel assemblies which were loaded in one of the PWRs operating in Korea were found to be failed due to PCI during a power ramp following a rector trip, while thrice-burned Zr–Nb fuel assemblies and twice-burned Zry-4 ones were intact. To investigate the effect of fuel rod oxide thickness on power ramp-induced cladding hoop stress, three intact fuel rods were selected, which include an intact twice-burned Zry-4 fuel rod, an intact thrice-burned Zr-4 fuel rod and an intact thrice-burned Zr–Nb fuel rod. With the use of a fuel performance analysis code, burnup-dependent steady-state cladding stress and ramp power-dependent cladding stresses at the power-ramped burnup were predicted for the three intact fuel rods. It was found that the cladding oxide thickness has a considerable effect on the ramp power-dependent cladding hoop stresses. In addition, the cladding maximum stress of the thrice-burned Zry-4 fuel rod with 125 μm oxide thickness exceeded an ultimate cladding tensile strength of the Zry-4 cladding when the pellet–clad friction coefficient-dependent cladding stress concentration ratio was considered. However, the thrice-burned Zr–Nb fuel rod with 50 μm oxide thickness was evaluated to have a considerable margin against the power ramp-induced PCI failure.     

A single-stage quasi-resonant flyback converter using a synchronous rectifier

A single-stage quasi-resonant flyback converter using the synchronous rectifier (SR) is proposed for improving power factor and system efficiency. This converter operates at the critical conduction mode with the variable frequency (VF) control to reduce the switching loss of the primary switch. The bulk capacitor voltage can be independent of the output load and kept within a practical range for the universal line input. Therefore, the problem of high-voltage stress across the bulk capacitor is reduced. The proposed converter features relatively low bulk capacitor voltage in the universal line voltage and also complies with the Standard IEC 61000-3-2 Class D limits. Moreover, since it uses the voltage-driven SR, it achieves a high efficiency. The operational principle and theoretical analysis are presented. Experimental results for a 100?W (19?V/5.3?A) adapter at the VF were obtained to show the performance of the proposed converter.     

The study on a statistical methodology for PWR fuel rod internal pressure evaluation

The most limiting design criteria for high Burnup PWR fuel are known to be rod internal pressure and cladding oxidation. Some fuel vendors have been increasing the design margin of rod internal pressure by increasing fuel rod plenum volume or optimizing fuel pellet grain size. In this study, a sophisticated statistical methodology that employs the response surface method and Monte Carlo simulation has been proposed to increase the design margin of rod internal pressure and subsequently a simplified statistical methodology has been developed to simplify the sophisticated statistical methodology. The simplified statistical methodology utilizes the system moment method combined with a deterministic approach for calculating a maximum variance of rod internal pressure. This simplified statistical methodology may be more efficient in the reload core fuel rod performance analyses than the sophisticated statistical methodology since the former eliminates numerous calculations needed for the evaluation of power history-dependent variances. It is found that this simplified methodology also generates more conservative rod internal pressure than the typical statistical methodology.     

The study on grid-to-rod fretting wear models for PWR fuel

The fretting wear is found to be generated at grid-to-rod contact areas by flow-induced vibration. This flow-induced grid-to-rod fretting wear may be initiated at a certain critical grid-to-rod gap that strongly depends on the extent of flow-induced vibration and grid spring designs. Three fretting wear excitation mechanisms acting on the grid-to-rod fretting wear are summarized. In order to examine the impact of grid spring designs on the fretting wear rate, the fretting wear tests for three kinds of grid spring designs were carried out for 500 h, simulating the reactor flow conditions. In parallel, three grid-to-rod fretting wear models that include constant work rate model, constant work density rate model and linear work density rate model have been developed. The three fretting wear models were used to predict the fuel rod perforation times with the use of the fretting wear test results. It is said that the constant work density rate model or the linear work density rate model is quite effective in predicting the grid-to-rod fretting-induced rod failure time observed in commercial nuclear power plants.     

Development of an advanced PWR fuel for OPR1000s in Korea

The advanced PWR fuel for the OPR1000s in Korea, PLUS7, has been developed to enhance thermal performance, high burnup capability and fuel reliability against grid-to-rod fretting wear and debris. The outstanding design features of PLUS7 include mixing vane mid-grids for increasing thermal performance and minimizing vibration-induced fretting wear, optimized fuel dimensions and advanced zirconium alloys for high burnup capability of 72,000 MWD/MTU, and an optimized fuel rod diameter for reducing pressure drop and improving neutron economy. The fuel assembly and its components performances have been verified through a wide spectrum of mechanical, thermal hydraulic, vibration and fretting wear tests. Based on the verification test results and the evaluations with the help of the KNF design code system, it is found that the PLUS7 fuel will maintain its integrity up to the envisaged burnup of 72,000 MWD/MTU. In addition, the PLUS7 fuel performances were evaluated to be considerably improved in comparison with the current fuel used in the OPR1000s.