Bioaccessible Iron and Zinc in Native and Fortified Enzyme Hydrolyzed Casein and Soya Protein Matrices

Casein and soybean are superior quality proteins; however, these are known to inhibit mineral absorption. These investigations were aimed at enzymatic modification of these proteins and to study their effect on mineral bioaccessibility. Casein and soybean proteins were hydrolyzed with alcalase and trypsin individually under optimum conditions. The protein hydrolysates, prepared with different degrees of hydrolysis, were freeze dried, fortified with either iron or zinc and analyzed for bioaccessible minerals in vitro. Proteolytic hydrolysis enhanced the bioaccessibility of iron and zinc in proportion to the degree of hydrolysis. Tryptic hydrolysis enhanced the bioaccessible iron from 1–4% in casein and from 1.3–3.3% in soybean. Alcalase hydrolysis showed a comparatively higher enhancement with both the proteins. Tryptic hydrolysis enhanced zinc bioaccessibity by 3-fold in casein and alcalase hydrolysis enhanced by 2- to 2.5-fold. In soybean, dephytinization showed a synergistic effect. In conclusion, enzymatic hydrolysis of proteins looks promising for enhancing bioaccessibility of minerals in protein matrices.     

Cassava starch‐graft‐polymethacrylamide copolymers as flocculants and textile sizing agents

Cassava starch‐graft‐polymethacrylamide (PMAM) copolymers were synthesized by a free‐radical‐initiated polymerization reaction, and the products were tested for their efficiency as flocculants and textile sizing agents. The highest percentages of grafting and monomer conversion were 79.9 and 78.0%, respectively. The grafted starches were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction analysis, scanning electron microscopy, differential scanning calorimetry, and thermogravimetric analysis. The average molecular weight of PMAM chains in the grafted starches ranged from 15.9 to 30.8 × 10⁵ g/mol. The grafted starches exhibited a higher peak viscosity and paste stability in comparison to the native starch (NS). Dynamic mechanical analysis showed that grafting provided fairly shear‐stable hydrogels, and the highest storage modulus obtained was 17,900 Pa compared to 1879 Pa for NS. The flocculation studies demonstrated the superiority of starch‐g‐PMAM over cassava starch and PMAM as an efficient flocculant. The tensile strength of cotton yarns sized with the starch‐grafted copolymer was significantly higher (104 MPa) compared to that sized with NS (34 MPa). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39810.     

Rheological and thermal properties of saponified cassava starch‐g‐poly(acrylamide) superabsorbent polymers varying in grafting parameters and absorbency

Cassava starch‐graft‐poly(acrylamide) superabsorbent polymers (SAPs) with varying absorbencies were synthesized. Weight average molecular weight (M_w) of the hydrolyzed starch‐graft‐copolymers ranged from 1.6 × 10⁶ to 2.8 × 10⁶ g/mol, the largest being shown by the sample with highest percentage grafting. The storage (G′) and loss modulus (G″) of hydrogels were determined as a function of frequency. G″ was larger than G′ for the hydrogels with higher absorbencies and exhibited a liquid‐like behavior. However, hydrogels with lower absorbencies showed a reverse viscoelastic behavior. The viscosity of hydrogels determined using a Brookfield viscometer at different shear rates was found to be larger for the hydrogels with higher absorbencies. The melting temperature (T_m) and enthalpy change of fusion (ΔH_f) of the SAPs ranged from 149.7 to 177.7°C and 65 to 494.9 J/g, respectively and showed a positive correlation with grafting parameters and M_w. Heavy metal ion removal capacity of hydrogel followed the order Cu²⁺ > Pb²⁺ > Zn²⁺. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40368.     

Impact of slip effects on unsteady Sisko nanoliquid heat and mass transfer characteristics over stretching sheet filled with gold nanoparticles

We have presented a comparison between steady and unsteady magnetohydrodynamic boundary layer flow, heat transfer features of Au–kerosene‐based nanoliquid over a stretching surface by taking variable viscosity, variable thermal conductivity, and slip boundary conditions in this study. Appropriate similarity translations are engaged to reduce nonlinear partial differential equations into a set of ordinary differential equations. These equations along with boundary conditions are elucidated numerically by finite‐element technique. Influence of several pertinent parameters on velocity, temperature, and concentration scatterings, in addition to that, the values of Nusselt number, skin‐friction coefficient, and Sherwood number are scrutinized in detail and the outcomes are exhibited through plots and tables. It is perceived that the values of Nusselt number, skin‐friction coefficient, and Sherwood number intensify in both steady–unsteady cases as the values of volume fraction parameter $\left(\mathrm{?}\right)$ rise.     

Effect of vindesine sulfate on the radiation-induced alterations in mouse spermatogenesis: a flow cytometric evaluation

The effect of 0.05 mg/kg body weight of vindesine sulfate was studied on the radiation-induced changes in mouse spermatogenesis at 1, 2, 7, 14, 21, 28, 35 and 70 days post-irradiation. Vindesine administration before exposure to 0, 0.5, 1, 2 and 3 Gy gamma-irradiation resulted in an increase in the radiation-induced perturbations of mouse spermatogenesis at various post-exposure time periods studied. A significant reduction in testicular weight was observed in both DDW + irradiated and VDS + irradiated groups at various post-irradiation time periods, depending on the exposure dose. Vindesine pretreatment resulted in an enhanced killing of spermatogonial cells at day 2 post-exposure at all the exposure doses, except 3 Gy when compared to DDW + irradiated controls. Consequently, the tetraploid (4C) population declined significantly by day 14 post-irradiation followed by a severe depletion in round spermatids (1C) by day 21 post-irradiation. The dose-response relationship for 4C and 1C populations was linear-quadratic at days 14 and 21, respectively. A significant elevation was observed in HC population from days 1 to 21 depending on the exposure dose. The germ cell ratios, viz. 4C:2C, 4C:S-phase, 1C:2C and 1C:4C, showed a significant decline in the VDS + irradiated group when compared to the DDW + irradiated group at various time periods, depending on the exposure dose.     

Electron microscopy of metastable phases in rapidly solidified Al-Co alloys

Four binary Al-Co alloys containing 2·4, 14, 20 and 25 at.% Co and a ternary Al-Co-Si alloy with 20 at.% Co and 5 at.% Si were rapidly solidified from the liquid state by melt spinning. It has been shown that the solid solubility of Co in Al can be increased up to at least 1·7at.% from the negligible value under equilibrium conditions. Two metastable crystalline intermediate phases and a D1 _a -type ordered phase were observed in localized regions in the rapidly solidified Al-2·4at.%Co alloy. A quasicrystalline decagonal phase has been observed in all the other rapidly solidified alloys. This decagonal phase was shown to contain dislocations, dislocation loops and also twin-like defects. The phenomenon of polytypism was also observed in this decagonal quasicrystalline phase. In extremely thin areas of the Al-14at.% Co alloy ribbons on amorphous phase was detected. Transmission electron microscopy was used to extensively characterize the phases in the as-solidified condition and also those produced during and after transformation to the equilibrium constitution. Work carried out when both the authors were in the Department of Metallurgical Engineering, Banaras Hindu University, Varanasi 221 005, India     

Hydrothermal Modifications of Tropical Tuber Starches. 1. Effect of Heat‐Moisture Treatment on the Physicochemical,Rheological and Gelatinization Characteristics

Cassava, sweet potato and arrowroot starches have been subjected to heat‐moisture treatment (HMT) under different conditions using a response surface design of the variables. A comparative study was performed on the pasting properties, swelling behaviour and the gelatinization properties of the modified starches and also on the rheological and textural properties of their pastes. X‐ray diffraction studies have shown that cassava starch exhibited a slight decrease in crystallinity, whereas sweet potato and arrowroot starches showed an increase in crystallinity after HMT at 120ºC for 14 h with 20% moisture. The swelling volume was reduced and the solubility was enhanced for all three starches after HMT, but both effects were more pronounced in the case of arrowroot starch. The decrease in paste clarity of the starch after HMT was higher in the case of cassava and sweet potato starches. Viscosity studies showed that the peak viscosity of all three starches decreased after HMT, but the paste stability increased as seen from the reduced breakdown ratio and setback viscosity. Studies on rheological properties have shown that storage and loss moduli were higher for the starches heat‐moisture treated at higher moisture and lower temperature levels than the corresponding native starches. Storage of the gel at ‐20ºC resulted in a significant increase in storage modulus for all the three starches. All the textural parameters of the gels were altered after the treatment which depended on the nature of the starch and also the treatment condition.     

Interstellar‐based topology control scheme for optimal clustering performance in WSN

Clustering is one of the essential operations in wireless sensor network (WSN) to ensure organized data aggregation followed by energy efficiency. However, obtaining optimal clustering performance is yet an unsolved problem in WSN. Review of existing approaches towards cluster optimization shows that effective balance between energy efficiency and topology control is still missing. Therefore, the proposed system presents a unique topology control mechanism using a novel concept of interstellar orientation toward optimizing the clustering performance in WSN. Adopting an analytical research methodology, the proposed system introduces two interstellar‐based topology control system, which targets the maximum saving of resource consumption of the cluster head. The simulated outcome of the study shows that the proposed topology control system offers significant energy conservation performance in comparison to the existing hierarchical clustering scheme in WSN.