Characterization of the structure and properties of processed alumina-graphene and alumina-zirconia composites

The onset of hybrid alumina-based composites, which combines two or more nano-particles within the alumina matrix has already shown promising improvements in the matrix material. However, variations in mechanical properties including the optimum compositions that give improved properties faced with the development of alumina-based composites require further studies to understand the underlying mechanisms and synergistic effects of the nano-particle additions on the alumina matrix. In the current study, the structure and properties of Al?O?-graphene (0.5 wt%) and Al?O?–ZrO? (4 wt% and 10 wt%) composites fabricated via hot-pressing was studied as a baseline for multiple combinations. Even though the addition of 10 wt%ZrO? resulted in a 23% reduction in the grain size of the alumina matrix, the 4 wt%ZrO? addition resulted in a 14% increase in grain size as compared to the parent alumina matrix. X-ray diffraction analysis revealed that there was approximately 85% monoclinic (m-ZrO₂) vs. 15% tetragonal (t-ZrO₂) crystal structures in the A4ZrO? sample whilst the A₁₀ZrO? had approximately 93% m-ZrO₂ vs. 7% t-ZrO₂. The high-volume fraction of the monoclinic crystal structures in the A₁₀ZrO? accounts for the induced microcracks in the sample since the transition from the ductile-tetragonal to brittle-monoclinic is associated with the exertion of compressive stresses on the alumina matrix by the associated elastic volume expansion of m-ZrO₂. Also, the addition of 0.5 wt%graphene resulted in about 37% reduction in the grain size of the alumina matrix, and approximately 10% increase in hardness as a result of the distribution of graphene along the grain boundaries of the parent alumina matrix, which restricts grain coalescence and growth during processing. Furthermore, an increase up to 115% and 164% were observed in the fracture toughness (K_IC) with the inclusion of 0.5 wt%graphene and 10 wt%ZrO? respectively, which was primarily ascribed to the fine-grained microstructures and toughening mechanisms of the intergranular graphene and ZrO? particles.     

Static energy reduction techniques for microprocessor caches

Microprocessor performance has been improved by increasing the capacity of on-chip caches. However, the performance gain comes at the price of static energy consumption due to subthreshold leakage current in cache memory arrays. This paper compares three techniques for reducing static energy consumption in on-chip level-1 and level-2 caches. One technique employs low-leakage transistors in the memory cell. Another technique, power supply switching, can be used to turn off memory cells and discard their contents. A third alternative is dynamic threshold modulation, which places memory cells in a standby state that preserves cell contents. In our experiments, we explore the energy and performance tradeoffs of these techniques. We also investigate the sensitivity of microprocessor performance and energy consumption to additional cache latency caused by leakage-reduction techniques.     

46,XX/69,XXX diploid-triploid mixoploidy with hypothyroidism and precocious puberty

We report a 20 month old female patient with diploid-triploid mixoploidy (46,XX/69,XXX) syndrome with hypothyroidism and precocious puberty. The triploid cell line was only expressed in the fibroblast culture and comprised the majority (95%) of the cells. Chromosome analysis of the fetal blood sample and peripheral blood sample were normal. The patient shows typical features of full triploidy (growth and severe mental retardation, cranial and facial dysmorphism, complete syndactyly of fingers 3/4, partial syndactyly of toes 2/3) and facial but no body asymmetry. At the age of 5 months central hypothyroidism and precocious puberty were diagnosed. Thin pigmented streaks were visible on the wrists and legs of the patient at the age of 16 months. This is the first patient reported so far with 46,XX/69,XXX mixoploidy suffering from hypothyroidism and precocious puberty.     

Dynamic simulations of the molecular conformations of wild type and mutant xanthan polymers suggest that conformational differences may contribute to observed differences in viscosity

Xanthan gum is an exopolysaccharide secreted by the bacterium Xanthamonas campestris whose ability to make solutions viscous at low concentrations and over a pH and temperature range have generated much interest in both academic and industrial environments. Mutant Xanthamonas strains have been derived that produce xanthan gums with an altered or variant subunit chemical structure and different measured viscosities when compared with the wild type (wt) form of the polymer. Two variant gums were targeted as potentially interesting in this study, these being the nonacetylated tetramer (natet) and the acetylated tetramer (atet), which both lack a side-chain terminal mannose residue and in one case (natet) lacks an acetate group on an internal mannose residue. Solutions of these tetrameric gums possess viscosities higher (natet) and lower (atet) than the wt gum, and therefore we have attempted to determine whether these molecules possess unique conformational preferences when compared with the wt and with each other. In this manner we can initiate an understanding of how a polysaccharide's conformation contributes to its solution properties. The GEGOP software permits a sampling of the static and dynamic equilibrium states of carbohydrate molecules, and this software was employed to calculate equilibrium states of representative oligosaccharides with chemical structures representative of xanthan-like molecules. Energy minimization techniques revealed similar local minima for all three molecules. Some of these minima are comprised of elongate backbone conformations (A type) in which side chains fold onto backbone surfaces. Other minima with A backbones possessed side chains in less intimate backbone contact especially when calculations were performed with a low dielectric constant. This phenomenon was particularly pronounced in the wt molecule where an increased number of negatively charged side-chain residues experience charge repulsion resulting in reduced side-chain-backbone contact. Metropolis Monte Carlo (MMC) dynamic simulations performed with an elevated temperature factor (1000 K) allowed a better qualitative representation of conformational space than 300 K simulations. Employing a nonhierarchical cluster analysis method (population density profile: PDP) coupled with a classification scheme, it was possible to partition resulting MMC data sets into conformational families. This analysis revealed that in simulations performed with different dielectric constant values (10, 25, and infinity) all molecules possessed primarily A-type backbones. Less elongate, more open helical backbone forms (B, C, D, J, and Flat-a) did occur during the simulations but were populated to a lesser extent. In the natet molecule significantly open helical backbones existed (E, F, G, H, and I) that did not occur in the lower viscosity wt and atet molecules. PDP clustering methods and subsequent conformational classification applied to the first residue (mannose) of the side chain permitted a determination of side-chain orientation. Comparison of all three molecules indicated a larger population of side-chain conformational families in less direct backbone contact for the wt molecule than either of the variant molecules (natet/atet) suggesting that the side chains in the wt are more flexible. Thus, a major conformational difference between the high viscosity natet and the lower viscosities of the wt/atet is the increased amount of open helical backbone in the natet. In addition, the significant difference between the higher viscosity wt and the lower viscosity atet is the increase side-chain flexibility in the wt. We hypothesize that conformational differences of this kind could form a partial explanation of the observed differences in viscosity between these xanthan-like polymers.     

Hepatitis B virus infection, hepatitis B vaccine, and hepatitis B immune globulin

Hepatitis B virus (HBV) infection is a major health problem in the United States; in 1995, approximately 128,000 cases occurred. Transmission of HBV occurs primarily by blood exchange (eg, by shared needles during injection drug use) and by sexual contact. Persons infected early in life are much more likely to become chronically infected than those infected during adulthood: as many as 90% of infants infected perinatally develop chronic infection and up to 25% will die of HBV-related chronic liver disease as adults. Clinical signs of acute hepatitis occur in about 50% of infected adults but in only 5% of infected preschool-aged children. In the United States, hepatitis B vaccine is currently made by recombinant DNA technology using baker's yeast. Preexposure vaccination results in protective antibody levels in almost all infants and children (> 95%) and healthy adults younger than 40 years of age (> 90%). The most common adverse event following administration of hepatitis B vaccine is pain at the injection site, which occurs in 13% to 29% of adult and 3% to 9% of children. A comprehensive hepatitis B vaccination policy is now recommended that includes (1) routine infant vaccination; (2) catch-up vaccination of 11- to 12-year-olds who were not previously vaccinated; (3) catch-up vaccination of young children at high risk for infection; (4) vaccination of adolescents and adults based on lifestyle or environmental, medical, and occupational situations that place them at risk; and (5) prevention of perinatal HBV infection.     

Cortisone-induced osteoporosis: effects on bone adenylate cyclase

The majority of patients with soft tissue or bone sarcomas of the upper extremity can be treated today with limb-saving procedures using combined modality therapies. For patients with a tumor in the shoulder area, sometimes an interscapulothoracic amputation is the only radical surgical treatment. However, in selected cases, in which the tumor does not involve the neurovascular bundle, a limb-sparing alternative might be the Tikhoff-Linberg resection. Normal function of the hand and forearm, with reasonable function of the elbow, can be maintained by this procedure. Four case histories are reported.