Synthesis of amino-cosubstituted polyorganophosphazenes and fabrication of their nanoparticles for anticancer drug delivery

The development of safe drug carriers is cardinal in cancer therapy, which can target the cancer cells and release the loaded drug on-demand without damaging the healthy cells of the body. In our work, we synthesized three different biodegradable polymers, poly[(ethyl aminobezoate) (ethyl glycinato) phosphazenes] (PABGPs), in different mole ratio of side groups. The successful synthesis of these PABGPs was confirmed by ¹H NMR, ³¹P NMR, FT-IR, and gel permeation chromatography. These PABGPs were fabricated into drug (camptothecin, CPT, a hydrophobic anticancer drug) loaded nanoparticles. These drug-loaded nanoparticles showed good drug release behaviors under normal physiological conditions (pH 7.4 and temperature 37°C). These PABGPs-based nanoparticles may find their application as effective drug carriers for cancer therapy.     

Systematics study through scanning electron microscopy; a tool for the authentication of herbal drug Mentha suaveolens Ehrh

In all over the world, herbal drugs are usually adulterated with similar species or varieties due to incorrect identification. Most of herbal products devoid purity and quality, therefore an attempt was carried out to identify plant species and authenticate its herbal drug products from Mentha suaveolens. Microscopy tools provide an excellent platform to identify plants at species level. In this study, microscopic and pharmacokinetic parameters of M. suaveolens were observed. Plant species were collected from high diverse areas of Northern Pakistan. Macro and micro‐morphology including palynology and anatomical features were analyzed to study M. suaveolens. Species characteristics were studied, while implementing microscopic techniques for the delimitation and identification of the species. Traditionally Mentha species are used to cure several diseases that is, digestive disorders, respiratory disorders. Micromorphology (stem, leaves, flowers structure, length etc.), palynology (shape, size of pollen etc.), and anatomical characters (types of stomata, epidermal cell shape, and trichomes) were studied. Micromorphology and anatomical characters were of great interest and significance to discuss the taxonomy of the species. Taxonomic characters were studied to characterize and authenticate the species. The aim of the present study is to observe in detail the taxonomic identification of the species in term of morphology, palynology, and foliar epidermal anatomy for the correct identification along with their medicinal uses in the area.     

Error bounds for initial value problems by optimization

The computation of the error bounds for approximate solutions of initial value problems for ordinary differential equations has a long and successful history. This paper presents a new scheme to compute such bounds with uncertain initial conditions using preconditioned defect estimates and optimization techniques. These bounds are based on the newly developed concept of conditional differential inequalities. The scheme is implemented in MATLAB and AMPL. The resulting enclosures are compared with the packages VALENCIA-IVP, VNODE-LP and VSPODE for bounding solutions of ODEs. The current prototype uses heuristics to solve the global optimization subproblems. Hence the bounds obtained in the numerical experiments are not fully rigorous. The latter can be achieved by using rigorous global optimization and rounding error control, but the effect on the bounds is likely to be marginal only.     

Green synthesised zinc oxide nanostructures through Periploca aphylla extract shows tremendous antibacterial potential against multidrug resistant pathogens

To grapple with multidrug resistant bacterial infections, implementations of antibacterial nanomedicines have gained prime attention of the researchers across the globe. Nowadays, zinc oxide (ZnO) at nano‐scale has emerged as a promising antibacterial therapeutic agent. Keeping this in view, ZnO nanostructures (ZnO‐NS) have been synthesised through reduction by P. aphylla aqueous extract without the utilisation of any acid or base. Structural examinations via scanning electron microscopy (SEM) and X‐ray diffraction have revealed pure phase morphology with highly homogenised average particle size of 18 nm. SEM findings were further supplemented by transmission electron microscopy examinations. The characteristic Zn–O peak has been observed around 363 nm using ultra‐violet–visible spectroscopy. Fourier‐transform infrared spectroscopy examination has also confirmed the formation of ZnO‐NS through detection of Zn–O bond vibration frequencies. To check the superior antibacterial activity of ZnO‐NS, the authors'' team has performed disc diffusion assay and colony forming unit testing against multidrug resistant E. coli, S. marcescens and E. cloacae. Furthermore, protein kinase inhibition assay and cytotoxicity examinations have revealed that green fabricated ZnO‐NS are non‐hazardous, economical, environmental friendly and possess tremendous potential to treat lethal infections caused by multidrug resistant pathogens.Inspec keywords: nanomedicine, zinc compounds, II‐VI semiconductors, wide band gap semiconductors, nanoparticles, scanning electron microscopy, X‐ray diffraction, antibacterial activity, transmission electron microscopy, particle size, Fourier transform infrared spectra, ultraviolet spectra, visible spectra, enzymes, biochemistry, molecular biophysics, microorganisms, drugs, toxicology, bonds (chemical), semiconductor growth, nanofabrication, vibrational modesOther keywords: green synthesised zinc oxide nanostructures, Periploca aphylla extract, antibacterial potential, multidrug resistant pathogens, multidrug resistant bacterial infections, antibacterial nanomedicines, P. aphylla aqueous extract, structural examinations, scanning electron microscopy, X‐ray diffraction, pure phase morphology, homogenised average particle size, SEM, transmission electron microscopy, Fourier‐transform infrared spectroscopy, bond vibration frequency, antibacterial activity, disc diffusion assay, colony forming unit testing, S. marcescens, E. cloacae, E. coli, ultraviolet‐visible spectroscopy, protein kinase inhibition assay, cytotoxicity, lethal infections, ZnO     

Formulation and characterisation of nanosuspension of herbal extracts for enhanced antiradical potential

Nanotechnology is a promising technique to increase the bioavailability of herbal medicines. This paper presents the nanosuspension approach for increasing the aqueous solubility and thereby bioactivity of important herbal extracts. Nanosuspensions of the seeds of three plants extract (Silybum marianum, Elettaria cardamomum and Coriandrum sativum) were prepared by using polyvinyl alcohol (1.5% w/v) as a stabiliser. Prepared nanoparticles were characterised by scanning electron microscope. Activity of nanosuspension formulation was assessed by using four in vitro antioxidant assays. S. marianum, E. cardamomum and C. sativum particle size was observed to fall in range of 446.1 ± 112.6, 456.63 ± 339.2 and 432.1 ± 172.8 nm, respectively, most of the particles were having spherical shape and smooth topology. These synthesised nanoparticles were found to be more effective against quenching free radical than their crude extracts and standards [butylated hydroxyl toluene and ascorbic acid]. C. sativum nanosuspension showed most free radical scavenging potential against 2,2-diphenyl-1-picrylhdrazyl (DPPH) and superoxide free radical scavenging assays (IC₅₀ 0.59 ± 0.01 and 0.81 ± 0.11 mg/ml). S. marianum nanosuspension was found to be most effective against DPPH radicals scavenging (IC₅₀ 0.34 ± 0.02 mg/ml). It was concluded that nanosuspension of herbal medicines potentiates the antioxidant potential.     

Degradation of physical properties of different elastomers upon exposure to palm biodiesel

Biodiesel, as an alternative fuel, is gradually receiving more popularity for use in internal combustion engines. However questions continue to arise with regard to its compatibility with elastomeric materials. The present work aims to investigate the comparative degradation of physical properties for different elastomers [e.g. ethylene propylene diene monomer (EPDM), silicone rubber (SR), polychloroprene (CR), polytetrafluroethylene (PTFE) and nitrile rubber (NBR)] upon exposure to diesel and palm biodiesel. Static immersion tests in B0(diesel), B10 (10% biodiesel in diesel), B20, B50 and B100(biodiesel) were carried out at room temperature (25 °C) for 1000 h. Different physical properties like, changes in weight and volume, hardness and tensile strength were measured at every 250 h of immersion time. Compositional changes in biodiesel due to exposure of different elastomers were investigated by Gas chromatography mass spectroscopy (GCMS). The overall sequence of compatible elastomers in palm biodiesel is found to be PTFE > SR > NBR > EPDM > CR.     

Effect of input variability on the quality of laser shock processing

Laser shock processing (LSP) involves high-energy laser radiation combined with suitable overlays to generate high-pressure pulses on the surface of the metal. The stress wave generated due to high pressure pulses propagates into the material causing the surface layer to yield and plastically deform, and thereby, develop a significant residual compressive stress in the surface region of the substrate material. The developed compressive stress field is beneficial to improve surface properties such as fatigue, wear, and corrosion. To improve the understanding of the shock hardening process, investigation into the physical processes involved is necessary. In the first part of this paper, the temporal variation in the pressure intensity and spot size is calculated by using a two-dimensional recoil pressure prediction model. Using an explicit non-linear FEA code, ANSYS LS-DYNA, the deformation behavior and residual stresses in the substrate material are predicted. In the second part, a probabilistic approach to the modeling and analysis of LSP is presented in this paper. Various factors that affect the probabilistic performance of the LSP are grouped into categories and a select number of factors known to be significant, for which the variability could be assessed, are modeled as random variables (such as recoil pressure, laser beam spot size, substrate material properties and others). The potential of the probabilistic approach in predicting the structural integrity of the laser-shocked components is addressed.     

SOA-Assisted Data-Polarization-Insensitive Wavelength Conversion in a PPLN Waveguide

We demonstrate a novel method of wavelength conversion in a periodically poled lithium niobate (PPLN) waveguide using polarization modulation and amplitude modulation of its pump. Polarization-insensitive, all-optical, intensity-to-polarization conversion in a semiconductor optical amplifier (SOA) is used to reduce the waveguide's polarization sensitivity from >30 dB to <1 dB. We demonstrate BER measurements of the converted signal at 2.5 Gb/s. We also demonstrate polarization modulation of the PPLN waveguide pump using cross-polarization modulation in highly nonlinear fiber (HNLF) at 10 Gb/s.     

Prestressed polymeric matrix composites: Longevity aspects

Elastically prestressed polymeric matrix composites (EPPMCs) are produced by stretching fibers (e.g., glass) within the composite during matrix curing. The resulting prestress can enhance mechanical performance, without increasing section dimensions or weight. Viscoelastically prestressed polymeric matrix composites (VPPMCs) can provide similar benefits, these being produced by subjecting polymeric fibers (e.g., nylon 6,6) to a creep load, which is released prior to molding. Although VPPMCs offer simplified processing and flexibility in product geometry, long‐term viscoelastic activity within the prestressing fibers is sensitive to time‐temperature limitations. In this study, nylon 6,6 fiber‐polyester resin samples were subjected to accelerated ageing. Using time‐temperature superposition, the samples were maintained at 70°C for 2,298 h, representing a 20‐fold ageing increase over previous work. Subsequent Charpy impact testing (at 20°C) demonstrated that the VPPMC samples absorbed ∼40% more energy than corresponding control (unstressed) counterparts; i.e., no deterioration in impact performance was observed, over a duration equivalent to ∼25 years at 50°C. In contrast, the longevity of EPPMCs remains unknown, but it is suggested that progressive localized matrix creep at the fiber‐matrix interface regions may cause a deterioration in elastically generated prestress with time and/or elevated ambient temperatures. POLYM. COMPOS., 37:2092–2097, 2016. © 2015 Society of Plastics Engineers     

Stress Generated on Aluminum During Anodization as a Function of Current Density and pH

Anodic oxidation is accompanied by stressgeneration during the growth of the oxide. The presentstudy focuses on the stress-generation mechanism onaluminum as a function of the applied current density in acidic solutions of sulfuric acid ofdifferent strengths giving variable pH. Abeam-deflection technique was utilized for thedetermination of the magnitude and direction of stressesgenerated during the anodic oxidation process. Generally,thickness of the oxide determines whether the stress iscompressive or tensile in nature. The results have beeninterpreted in terms of the formation and annihilation of anion (O^2-) and cation(Al³⁺) vacancies. A reduction in thealuminum-ion vacancy concentration (V Al ³ ) results in a compressive stressdeflection, whereas tensile-stress deflection isintroduced by an increase in the oxygen vacancy(Vo²⁺) concentration. The mechanism isfurther elucidated by current-density jump/dropexperiments. The results show that stress in this caseis affected by the dissolution of the oxide at the oxide-electrolyteinterface.