Optimization of Pathogen Capture in Flowing Fluids with Magnetic Nanoparticles

Magnetic nanoparticles have been employed to capture pathogens for many biological applications; however, optimal particle sizes have been determined empirically in specific capturing protocols. Here, a theoretical model that simulates capture of bacteria is described and used to calculate bacterial collision frequencies and magnetophoretic properties for a range of particle sizes. The model predicts that particles with a diameter of 460 nm should produce optimal separation of bacteria in buffer flowing at 1 L h⁻¹. Validating the predictive power of the model, Staphylococcus aureus is separated from buffer and blood flowing through magnetic capture devices using six different sizes of magnetic particles. Experimental magnetic separation in buffer conditions confirms that particles with a diameter closest to the predicted optimal particle size provide the most effective capture. Modeling the capturing process in plasma and blood by introducing empirical constants (c_e), which integrate the interfering effects of biological components on the binding kinetics of magnetic beads to bacteria, smaller beads with 50 nm diameters are predicted that exhibit maximum magnetic separation of bacteria from blood and experimentally validated this trend. The predictive power of the model suggests its utility for the future design of magnetic separation for diagnostic and therapeutic applications.     

Wear and Wear Transition in Silicon Carbide Ceramics during Sliding

Wear and wear transition in silicon carbide ceramics during sliding have been investigated. Three different microstructures, i.e., solid-state-sintered silicon carbide, liquidphase-sintered silicon carbide, and a liquid-phase-sintered SiC-TiB₂ composite, were produced by hot pressing. Wear data and examinations of worn surfaces showed that the wear behavior of these silicon carbide ceramics was significantly different. In the solid-state-sintered silicon carbide, the wear occurred by a grooving process. In the liqudphase-sintered silicon carbide and composite, on the other hand, an abrupt transition in the wear mechanism from an initial grooving process to a grain pullout process occurred during the test. The transition occurred significantly earlier in the composite than in the carbide. The different wear behavior in these silicon carbide ceramics is discussed in relation to the grain or interphase boundary strength.     

Variational density matrix approach to the temperature-dependent elementary excitation spectrum of two-dimensional liquid4He

Using the variational density matrix method, we obtain a temperature-dependent elementary excitation spectrum for two-dimensional liquid⁴He. For more precise results, we use a Jastrow-Feenberg-type trial wave function and include the contribution of elementary diagrams within the hypernetted chain approximation. The behavior of the excitation spectrum as a function of the temperature and density in two dimensions is similar to that of the bulk system, but has a smaller roton minimum. The roton minimum of the excitation spectrum decreases with increasing temperature and increases with increasing density at low densities but decreases at large densities. The results agree well with Monte Carlo calculations and are closer than pevious theories to experimental measurements of⁴He film adsorbed on substrates.     

k-Nearest neighbor query processing algorithm for cloaking regions towards user privacy protection in location-based services

Due to the advancement of wireless internet and mobile positioning technology, the application of location-based services (LBSs) has become popular for mobile users. Since users have to send their exact locations to obtain the service, it may lead to several privacy threats. To solve this problem, a cloaking method has been proposed to blur users’ exact locations into a cloaked spatial region with a required privacy threshold (k). With the cloaked region, an LBS server can carry out a k-nearest neighbor (k-NN) search algorithm. Some recent studies have proposed methods to search k-nearest POIs while protecting a user’s privacy. However, they have at least one major problem, such as inefficiency on query processing or low precision of retrieved result. To resolve these problems, in this paper, we propose a novel k-NN query processing algorithm for a cloaking region to satisfy both requirements of fast query processing time and high precision of the retrieved result. To achieve fast query processing time, we propose a new pruning technique based on a 2D-coodinate scheme. In addition, we make use of a Voronoi diagram for retrieving the nearest POIs efficiently. To satisfy the requirement of high precision of the retrieved result, we guarantee that our k-NN query processing algorithm always contains the exact set of k nearest neighbors. Our performance analysis shows that our algorithm achieves better performance in terms of query processing time and the number of candidate POIs compared with other algorithms.     

Material Design for 3D Multifunctional Hydrogel Structure Preparation

Hydrogels are recognized as one of the most promising materials for e-skin devices because of their unique applicable functionalities such as flexibility, stretchability, biocompatibility, and conductivity. Beyond the excellent sensing functionalities, the e-skin devices further need to secure a target-oriented 3D structure to be applied onto various body parts having complex 3D shapes. However, most e-skin devices are still fabricated in simple 2D film-type devices, and it is an intriguing issue to fabricate complex 3D e-skin devices resembling target body parts via 3D printing. Here, a material design guideline is provided to prepare multifunctional hydrogels and their target-oriented 3D structures based on extrusion-based 3D printing. The material design parameters to realize target-oriented 3D structures via 3D printing are systematically derived from the correlation between material design of hydrogels and their gelation characteristics, rheological properties, and 3D printing processability for extrusion-based 3D printing. Based on the suggested material design window, ion conductive self-healable hydrogels are designed and successfully applied to extrusion-based 3D printing to realize various 3D shapes.     

Transport properties for a dilute solution of3He in two-dimensional liquid4He

The temperature variations of the diffusion coefficientD(T), thermal diffusion ratio k _T (T) and thermal conductivity (T) in a dilute solution of³He atom in two-dimensional liquid helium are evaluated explicitly by solving the kinetic equations via phonon-phonon, phonon-roton, roton-roton, impurityelementary excitation and impurity-impurity scatterings. In the low-temperature region, the main contributions toD(T) and (T) come from the interactions between phonons and impurities, while in the high-temperature region the interactions between impurities and whole elementary excitations contribute more strongly toD(T) and (T) than those of only elementary excitations. For a dilute solution, the thermal diffusion ratio k _T (T), neglecting the internal mass counterflow, is much smaller than the effective thermal diffusion ratio k _T ^* (T), which is a function of thermostatic properties. The effective thermal conductivity _eff is much larger than the thermal conductivity and has different temperature dependence from the thermal conductivity. The behaviors of the two-dimensional diffusion coefficient and thermal conductivity are much like the bulk case, where they exhibit exponential decay with increasing temperature, although they are much smaller than those of the bulk case.     

Continuous generation of hydrogel beads and encapsulation of biological materials using a microfluidic droplet-merging channel

In this paper, we describe a method for encapsulation of biomaterials in hydrogel beads using a microfluidic droplet-merging channel. We devised a double T-junction in a microfluidic channel for alternate injection of aqueous fluids inside a droplet unit carried within immiscible oil. With this device, hydrogel beads with diameter <100 μm are produced, and various solutions containing cells, proteins and reagents for gelation could merge with the gel droplets with high efficiency in the broad range of flow rates. Mixing of reagents and reactions inside the hydrogel beads are continuously observed in a microchannel through a microscope. By enabling serial injection of each liquid with the dispersed gel droplets after they are produced from the oil-focusing channel, the device simplifies the sample preparation process, and gel-bead fabrication can be coupled with further assay continuously in a single channel. Instantaneous reactions of enzyme inside hydrogel and in-situ formation of cell-containing beads with high viability are demonstrated in this report.     

Bioethanol production from micro-algae, Schizocytrium sp., using hydrothermal treatment and biological conversion

Hydrothermal fractionation for micro-algae, Schizocytrium sp., was investigated to separate sugars, lipids, and proteins. This fractionation process produced protein-rich solid cake and liquid hydrolysates, which contained oligomeric sugars and lipids. Oligomeric sugars and lipids were easily separated by liquid-liquid separation. Sugars in the separated hydrolyzate were determined to be mainly D-glucose and L-galactose. Fractionation conditions were optimized by response surface methodology (RSM). Optimal conditions were found to be 115.5 °C of reaction temperature, 46.7 min of reaction time, and 25% (w/w) of solid loading. The model predicted that maximum oligomeric sugar yield (based on untreated micro-algae weight), which can be recovered by hydrothermal fractionation at the optimum conditions, was 19.4 wt% (based on the total biomass weight). Experimental results were in agreement with the model prediction of 16.6 wt%. Production of bioethanol using micro-algae-induced glucan and E. coli KO11 was tested with SSF (simultaneous saccharification and fermentation), which resulted in 11.8 g-ethanol/l was produced from 25.7 g/l of glucose; i.e. the theoretical maximum ethanol yield based on glucan in hydrolyzate was 89.8%.     

Korean language math-to-speech rules for digital books for people with reading disabilities and their usability evaluation

The Journal of Supercomputing - Although Digital Accessible Information System, an international digital talking book standard, is conducting active research on upper level education for people...     

Drug‐loaded microparticles prepared by the one‐step deposition of calcium carbonate/alginate onto cotton fabrics

Calcium carbonate (CaCO₃)/alginate inorganic–organic hybrid particles were synthesized and deposited on to the surface of cotton fabrics with a novel one‐step procedure. The effects of the Ca²⁺/CO₃^2?/alginate molar ratio on the cotton matrix were investigated. The optimization of the process resulted in a regular shaped hybrid microparticles, and scanning electron microscopy revealed that the particles were uniformly distributed on the surface of the fibers. Dynamic light scattering showed that the particles were about 2 μm in diameter. Moreover, transmission electron microscopy images demonstrated that the core–shell structure of the particles existed along with CaCO₃ evenly enfolded into the alginate layer. An X‐ray diffraction pattern displayed that the alginate/CaCO₃ hybrid microparticles were a mixture of calcite and vaterite crystal. Fourier transform infrared spectroscopy indicated that CaCO₃/alginate hybrid particles formed in situ were the only deposited materials. The thermogravimetric analysis curve indicated a certain mass ratio of the alginate and CaCO₃ in the hybrid particles. Furthermore, the drug‐loading and drug‐release properties of the hybrid microspheres were studied, and the results show that the water‐soluble diclofenac sodium could be effectively loaded in the hybrid microparticles and the drug release could be effectively sustained. Finally, both of the microparticles and modified fabrics had good cytocompatibility. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42618.