2,4,6‐Trichlorophenol and phenol removal in methanogenic and partially‐aerated methanogenic conditions in a fluidized bed bioreactor

A fluidized bed bioreactor (FBBR) was operated for more than 575 days to remove 2,4,6‐trichlorophenol (TCP) and phenol (Phe) from a synthetic toxic wastewater containing 80 mg L^?1 of TCP and 20 mg L^?1 of Phe under two regimes: Methanogenic (M) and Partially‐Aerated Methanogenic (PAM). The mesophilic, laboratory‐scale FBBR consisted of a glass column (3 L capacity) loaded with 1 L of 1 mm diameter granular activated carbon colonized by an anaerobic consortium. Sucrose (1 g COD L^?1) was used as co‐substrate in the two conditions. The hydraulic residence time was kept constant at 1 day. Both conditions showed similar TCP and Phe removal (99.9 + %); nevertheless, in the Methanogenic regime, the accumulation of 4‐chlorophenol (4CP) up to 16 mg L^?1 and phenol up to 4 mg L^?1 was observed, whereas in PAM conditions 4CP and other intermediates were not detected. The specific methanogenic activity of biomass decreased from 1.01 ± 0.14 in M conditions to 0.19 ± 0.06 mmolCH₄ h^?1 gTKN^?1 in PAM conditions whereas the specific oxygen uptake rate increased from 0.039 ± 0.008 in M conditions to 0.054 ± 0.012 mmolO₂ h^?1 gTKN^?1, which suggested the co‐existence of both methanogenic archaea and aerobic bacteria in the undefined consortium. The advantage of the PAM condition over the M regime is that it provides for the thorough removal of less‐substituted chlorophenols produced by the reductive dehalogenation of TCP rather than the removal of the parent compound itself. Copyright © 2005 Society of Chemical Industry     

Hardware and software architecture for power quality analysis

This paper presents a novel concept for power quality hardware and software architecture. Software tools related to detection, classification and characterization of power quality events can be integrated into a Distribution Control Center in which the interconnection between different subsystems is being carried out through the Internet allowing flexibility to the system. This system is implemented using wavelet analysis applied in all proposed algorithms. Different power quality events are taken as examples to illustrate the capabilities of the proposed method. The obtained results reveal that the proposed architecture is feasible to be implemented as an integral part of a control center system.The proposed system has the property of fast and accurate detection and classification of any power quality disturbance event and introduces a new PQ index determination that allows characterizing any type of disturbance including the non-periodic signals.     

Nonlinear Creep Damage Model for Concrete under Uniaxial Compression

An isotropic model for creep damage of concrete under uniaxial compression is proposed, where the combined effect of nonlinear viscous strain evolution and crack nucleation and propagation at high stress levels is considered. Strain splitting assumption is used for creep and damage contributions. Creep is modeled by a modified version of solidification theory. As usual in the modeling of damage of concrete, a damage index based on positive strains is introduced. As particular cases, the proposed model reduces to linear viscoelasticity for long time low stress levels whereas, for very high stresses, tertiary creep causing failure at a finite time can be described. The effect of strength variation with time is also included. The model is numerically implemented to perform time integration of nonlinear equations by means of a modified version of exponential algorithm. The model is validated through comparison with experimental results. Some numerical examples are also presented, where the roles of concrete ageing and strength variation with time are investigated.     

W‐band physical layer design issues in the context of the DAVID–DCE experiment

This paper aims at focusing on the aspects concerning the physical layer design for an innovative satellite communication experiment. Such an experiment, denoted by the acronym DAVID–DCE (Data and Video Interactive Distribution—Data Collection Experiment) is based on the exploitation of the W‐band (75–110 GHz) for high‐bit‐rate satellite transmission. The potential advantages of using of the W‐band are mainly related to the great bandwidth availability, and to the absence of interference. Moreover, an expected result of the experiment is a substantive improvement in the communication system's performances in the presence of meteorological phenomena (e.g. rain) as compared with the more conventional Ka‐band satellite transmission. On the other hand, problems to be faced concern the non‐ideal behaviours of hardware devices employed for high‐frequency digital transmission. In particular, carrier recovery and timing recovery are the most crucial signal‐processing tasks to be carefully considered in the design of the physical level of the system, because they considerably suffer from hardware impairments. The purpose of this work is to illustrate the proposed solutions in terms of the most critical modulation, demodulation and synchronization design issues, together with the effects of non‐ideal behaviours of hardware components on BER performances. Copyright © 2004 John Wiley & Sons, Ltd.     

Immobilization of an endopectinlyase on γ-alumina: Study of factors influencing the biocatalytic matrix stability

Endopectinlyase (EC 4.2.2.10) from Aspergillus japonicus was immobilized on to γ-alumina. Adsorption performed at pH 5·0 and a subsequent cross-linking phase using 0·1% glutaraldehyde were the chosen immobilization conditions. The comparison between the main biochemical parameters of the immobilized and free form of the enzyme showed that the immobilization procedure used did not affect the enzyme biochemical properties. The interactions between the carrier and the enzyme are essentially secondary bonding. In fact they depend on the pH and on the presence of phosphate ions in the medium. A tentative chemical model of the biocatalytic matrix thus obtained is proposed.     

A C/I advantageous satellite system configuration for land mobile applications

A satellite system based on the frequency scanning concept has been recently assessed for L‐band land mobile communications. The study – promototed by ESA/ESTEC for an European application mission – has reached an advanced electrical design phase. The selected configuration is particularly advantageous in terms of Carrier‐to‐Intermodulation ratio (C/I) performance, which constitutes a requirement of key‐importance in the envisaged user applications. The advantage in C/I is due to the proper choice of the on‐board transmitter configuration, which adopts power module pairs where the overall power demand is evenly distributed. The consequent improved C/I is then achievable at both transmitter and radiated far field level. The present paper aims a contribution to the design methodology of frequency scanning satellite systems, by joining two key‐aspects: in fact an analytical approach is proposed to demonstrate the C/I advantage achievable through frequency scanning satellite systems and the methodology is applied to a concrete example, the ESA/ESTEC system, whose feasibility has been fully proved in previous studies. The analysis is performed both at transmitter level and in the far field. The main results achieved are hereinafter presented. This revised version was published online in June 2006 with corrections to the Cover Date.     

The Lazy Cook Problem, or Scheduling Two Parallel Machines to Optimize Vehicle Utilization

A cook has to prepare n cakes using an oven with two racks. According to the recipe, the i-th cake has to be baked for exactly a _i minutes. Cakes to be cooked are taken from a table and carried to the oven, and once cooked are carried back to the table by means of a trolley that can carry two cakes at a time. What is the minimum number q ^* of round trips required of the cook? This problem has application to the operation scheduling of transportation systems and to material cutting. A different problem arises according to whether the cook accepts or not to stay near the oven for awhile with the trolley. If the trolley cannot be idle at the oven, an optimum schedule with no oven idle-time always exists: consequently, the trolley schedule is trivial, and the problem is transformed into a set packing. For this case, we propose and test a heuristic method which generates all of the promising columns of the set packing, and solves the resulting problem by branch-and-bound. Instead, if the trolley can be idle at the oven for a limited amount of time, a problem arises to find an optimal schedule of the trolley: in this case we show how to use a scaling technique in order to obtain a very good feasible solution by the method above.     

Attempted suicide among adolescents: A stepwise discriminant analysis.

A sample of 40 adolescents (aged 13–17 yrs), some of whom had attempted suicide (n?=?20) and some who had not (n?=?20), were compared on a number of life history and psychological variables (affective and cognitive). Stepwise discriminant analyses produced 1 discriminant function (the lack of emotional significant other) that differentiated between the groups. This single discriminant function accounted for 77% of the variance in the data. These results are interpreted within the context of the early loss hypothesis. (PsycINFO Database Record (c) 2010 APA, all rights reserved)