Photocatalytic degradation of methyl orange using heteropolytungstic acid-encapsulated TiSBA-15

Heteropolyphosphotungstic acid (H₃PW₁₂O₄₀) (HPA)-encapsulated titanium-supported SBA15 nanoporous materials (HPA-TiSBA-15) were synthesized as a new photocatalyst, and they were characterized by FT-IR and ³¹P NMR MAS spectroscopic methods. Their photocatalytic effects on degradation of methyl orange in water were investigated under natural conditions, and it was found that a 4-fold increase in the photodegradation rate is observed in the presence of HPA-TiSBA-15 as compared to the rate observed in the presence of titanium-supported SBA15 nanoporous materials (TiSBA-15) without HPA.     

Halogen-free acylation of toluene over FeSBA-1 molecular sieves

Three-dimensional cage type iron substituted mesoporous silica with different iron contents (FeSBA-1) was synthesized in a highly acidic media using cetyltriethylammonium bromide and tetraethylorthosilicate as a template and a silica source, respectively. Acylation of toluene with acetic anhydride (AA) was carried out over FeSBA-1 mesoporous catalysts with different n_Si/n_Fe ratios in the temperature range 80–180 °C for a time-on-stream of 1–6 h under liquid phase conditions. The important factors affecting the conversion and the selectivity of the reaction, such as the reaction temperature, feed ratio, catalyst weight and time-on-stream were studied and the results are discussed in detail. The reaction conditions were optimized and the n_AA/n_Toluene ratio of 2 and catalyst weight of 0.1 g (3.3 wt% of total reaction mixture) were maintained for all catalytic runs. It was found that the catalytic activity is strongly influenced by the amount of tetrahedral iron in the catalysts. Among the catalysts used in the present study, FeSBA-1(36) showed a high toluene conversion and selectivity to p-methylacetophenone (p-MAP) under the optimized reaction conditions. It was also found that the selectivity for p-MAP was always higher than m-MAP and o-MAP for all the catalysts and the activity of the catalysts changes in the following order: FeSBA-1(36) > FeSBA-1(90) > FeSBA-1(120).     

Wideband reflecting frequency-selective surface polarizer for X-band applications

This paper proposed the design of a broadband linear-to-circular reflecting polarizer for X-band applications. The polarizer is designed with three-arm dipole-shaped unit cells with a full ground plane to get wideband performance. The incident linear polarized wave is converted to a right-handed circularly polarized wave upon reflection from the polarizer. The footprint of the unit cell is 9 × 9 mm, which is printed on a FR-4 substrate. Fabricated prototype is measured for its performances like polarization conversion ratio (PCR), fractional bandwidth, and aperture efficiency. The PCR is about 97%, and the fractional bandwidth is 64% with the aperture efficiency of more than 80%. Polarizer performance is analyzed in transverse electric and transverse magnetic modes, and they are stable up to 40° of various incident angles. The polarizer exhibits the 3-dB axial ratio bandwidth from 8 to 12 GHz, which is suitable for satellite applications.     

Development and performance analysis of a novel agitated vessel

The objective of the present study was to design, fabricate and evaluate the performance of a novel airi-nducing impeller system with a specially designed air-inducing tube-set. The novel air-inducing impeller system, when attached to a conventional baffled agitated vessel, could convert it into an air-inducing reactor. Water was used as the working fluid and the characteristics of the impeller system such as critical speed, power consumption and gas holdup were investigated by varying the gas free liquid level, orifice immersion depth, bottom clearance and impeller speed. Results showed that this novel air-inducing impeller system induced the air at speeds lower than the critical speeds reported by most of the investigators in the literature.     

Minocycline Loaded Hybrid Composites Nanoparticles for Mesenchymal Stem Cells Differentiation into Osteogenesis

Bone transplants are used to treat fractures and increase new tissue development in bone tissue engineering. Grafting of massive implantations showing slow curing rate and results in cell death for poor vascularization. The potentials of biocomposite scaffolds to mimic extracellular matrix (ECM) and including new biomaterials could produce a better substitute for new bone tissue formation. A purpose of this study is to analyze polycaprolactone/silk fibroin/hyaluronic acid/minocycline hydrochloride (PCL/SF/HA/MH) nanoparticles initiate human mesenchymal stem cells (MSCs) proliferation and differentiation into osteogenesis. Electrospraying technique was used to develop PCL, PCL/SF, PCL/SF/HA and PCL/SF/HA/MH hybrid biocomposite nanoparticles and characterization was analyzed by field emission scanning electron microscope (FESEM), contact angle and Fourier transform infrared spectroscopy (FT-IR). The obtained results proved that the particle diameter and water contact angle obtained around 0.54 ± 0.12 to 3.2 ± 0.18 µm and 43.93 ± 10.8° to 133.1 ± 12.4° respectively. The cell proliferation and cell-nanoparticle interactions analyzed using (3-(4,5-dimethyl thiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium inner salt) MTS assay (Promega, Madison, WI, USA), FESEM for cell morphology and 5-Chloromethylfluorescein diacetate (CMFDA) dye for imaging live cells. Osteogenic differentiation was proved by expression of osteocalcin, alkaline phosphatase activity (ALP) and mineralization was confirmed by using alizarin red (ARS). The quantity of cells was considerably increased in PCL/SF/HA/MH nanoparticles when compare to all other biocomposite nanoparticles and the cell interaction was observed more on PCL/SF/HA/MH nanoparticles. The electrosprayed PCL/SF/HA/MH biocomposite nanoparticle significantly initiated increased cell proliferation, osteogenic differentiation and mineralization, which provide huge potential for bone tissue engineering.     

Natural Convection in a Differentially Heated Cavity with Parallel Heat-Generating Baffles

Natural convection in a horizontal differentially heated square cavity containing two vertical heat generating baffles is studied numerically. The baffles are assumed to generate heat uniformly at the same or different rates. Asymptotic steady-state results for the vorticity–stream function formulation are presented in the form of streamline and isotherm plots. The fluid flow, heat transfer, and average Nusselt number are investigated for different heat generation ratios and spacing between the baffles. Convection within the cavity gets augmented for increasing values of heat generation ratio. When the two baffles are located very near the cavity walls, an increase in heat generation ratio induces a strong buoyancy convective flow. When they are very close to each other an increase in heat generation ratio strengthens the innermost cell around the baffles, which in turn drives the global flow at a faster rate through a pair of intermediate inner cells. It is found that the blocking effect of the baffles strongly depends on heat generation ratio and spacing between the baffles. The heat transfer rate varies nonlinearly against spacing between the baffles, and the possible physical reason is given.     

Primary processes of the thermal degradation of HET acid containing unsaturated polyester cured with styrene

The primary processes of thermal degradation of 1,4,5,6,7,7-hexachloro-5-norbornene-2,3-dicarboxylic (HET) group containing unsturated polyesters cured with styrene were investigated. DTA traces in nitrogen atmosphere showed a much more pronounced endothermic reaction as the chlorine content in the unsaturated polyester resin decreased. This could be associated to the unzipping of the polystyrene units which is interfered by hexachlorocyclopentadiene ejected during degradation. Actually the styrene formation is prevented in a certain range of temperature due to the interaction with hexachlorocyclopentadiene. This was proved by on-line mass spectroscopic analysis of the degrading polymer.