Investigation of the changes in physical properties of PES/PVC fabrics after aging

The aim of this work was to investigate the physical and mechanical performance of architectural polyester (PES)–poly(vinyl chloride) (PVC) membranes exposed to different artificial aging conditions. Two commercially available architectural membranes were chosen as research objects. The durability of the PES/PVC fabrics was evaluated by the loss in mechanical performance, scanning electron microscopy, and X-ray diffraction analysis in order to understand the effect of the degradation agents on the surface of the membranes. The mechanical performance of the PES/PVC membranes was unchanged. Scanning electron microscopy images of the tested materials showed initial cracks after aging. The X-ray fluorescence analysis showed that at the time of aging, the amount of Cl and Si decreased slightly, while Ti decreased by half, and Ca by volume increased twice. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47523.     

Spinal Excitatory Dynorphinergic Interneurons Contribute to Burn Injury-Induced Nociception Mediated by Phosphorylated Histone 3 at Serine 10 in Rodents

The phosphorylation of serine 10 in histone 3 (p-S10H3) has recently been demonstrated to participate in spinal nociceptive processing. However, superficial dorsal horn (SDH) neurons involved in p-S10H3-mediated nociception have not been fully characterized. In the present work, we combined immunohistochemistry, in situ hybridization with the retrograde labeling of projection neurons to reveal the subset of dorsal horn neurons presenting an elevated level of p-S10H3 in response to noxious heat (60 °C), causing burn injury. Projection neurons only represented a small percentage (5%) of p-S10H3-positive cells, while the greater part of them belonged to excitatory SDH interneurons. The combined immunolabeling of p-S10H3 with markers of already established interneuronal classes of the SDH revealed that the largest subset of neurons with burn injury-induced p-S10H3 expression was dynorphin immunopositive in mice. Furthermore, the majority of p-S10H3-expressing dynorphinergic neurons proved to be excitatory, as they lacked Pax-2 and showed Lmx1b-immunopositivity. Thus, we showed that neurochemically heterogeneous SDH neurons exhibit the upregulation of p-S10H3 shortly after noxious heat-induced burn injury and consequential tissue damage, and that a dedicated subset of excitatory dynorphinergic neurons is likely a key player in the development of central sensitization via the p-S10H3 mediated pathway.     

A Review of Ultrasonic Reflectometry for the Physical Characterization of Lubricated Tribological Contacts: History,Methods, Devices,and Technological Trends

Tribology Letters - The tribological behavior of a nickel-based single crystal superalloy treated by shot-peening has been investigated. Friction tests under three normal loads and three...     

Microstructural and compositional aspects of ZnO-based varistor ceramics prepared by direct mixing of the constituent phases and high-energy milling

ZnO-based varistor samples were prepared by the direct mixing of the constituent phases (DMCP) and sintering at 1100 °C for 2 h. The influence of the starting powder mixture's composition – the amounts of the pre-reacted varistor compounds and their composition – and its preparation, either with or without mechano-chemical activation (MCA), on the microstructure, phase composition and electrical characteristics of the varistor samples was studied. It showed that MCA improved the density and microstructural homogeneity of the varistor samples. MCA strongly affected the grain growth: it enhanced the nucleation of inversion boundaries (IBs) in the ZnO grains and the IBs-induced grain-growth mechanism resulted in uniform grain growth and hence a microstructure with smaller ZnO grains and a narrower grain size distribution. The final phase composition of the samples prepared by the DMCP method mainly depended on the presence of varistor dopants that can prevent the formation of the pyrochlore phase, especially Cr₂O₃, while MCA can affect it mostly by providing a homogeneous distribution of those dopants. The DMCP varistor samples prepared with MCA had much better current–voltage characteristics than the samples of the same composition prepared from unactivated powders.     

Interactions in the complement-mediated lysis of blood group AB erythrocytes sensitized simultaneously with anti-A and anti-B monoclonal antibodies

The lysis of group AB erythrocytes by human complement was studied by different anti-A and anti-B IgM monoclonal antibodies (mabs) in a 51Cr-release assay. The concentration of membrane-bound immunoglobulin was detected by ELISA, and the amount of C1q and C3 bound to sensitized red cells was measured by using purified, 125I-labelled molecules. We have demonstrated that there is an exponential relationship between the concentration of the sensitizing IgM mabs and C1q binding to the sensitized AB cell. The efficiency of binding was related to the number of antibodies bound; thus, anti-A sensitized cells bound 3-6 times more C1q than anti-B sensitized cells did. AB cells, on the other hand, bound similar amounts of C3 whether anti-A or anti-B was present. The lytic efficiencies of the various IgM mabs during short incubation times were different, suggesting that the complement activation rates vary widely with different antibodies on the AB cell membrane. The binding of C1q to an antibody-sensitized target activates a cascade, whose components may migrate away from the sensitizing antibody; interactions between the activation processes generated by the anti-A and anti-B antibodies may thus occur. Choosing appropriate pairs of anti-A and anti-B mabs for the simultaneous sensitization of AB cells has indeed resulted in stimulation in some and inhibition in other combinations of mabs. It is suggested that stimulation is observed when the activated intermediates are produced in excess, whereas inhibition occurs when a shortage of activated intermediates prevents mutual utilization.     

Clinical and experimental studies of intraoperative autotransfusion using a new filtration device

The Haemocell S-350 device has recently been introduced for intraoperative autotransfusion. The system uses a novel membrane filter to process shed blood. In the first part of this study a 0.2-micron pore size filter was used in a randomized trial comparing the use of autotransfusion (n = 8) with bank blood controls (n = 9) during aortic reconstruction. This part of the trial was abandoned because of unexpected non-surgical bleeding. Bank blood requirements fell from a median of 3.0 (range 0.0-9.0) units to 1.5 (range 0.0-7.0) units when autotransfusion was used, but these patients had a greater perioperative blood loss (1791 (range 932-3104) versus 1140 (range 440-3840) ml). There was evidence of postoperative heparin excess with an activated partial thromboplastin time ratio of 1.3 (range 0.9-3.0) versus 1.0 (range 1.0-1.2) in controls and an activated clotting time of 206 (range 143-280) versus 137 (range 107-142) s. This was confirmed by raised plasma heparin levels and a prolonged thrombin time normalized by protamine. To improve performance a 0.6-micron pore size filter was studied in ten patients. Filtration efficiency doubled from 19 to 38 per cent. Electron micrographs demonstrated better filter clearance, but 44 per cent of the original concentration of heparin remained in the reinfusate. The S-350 device may be an attractive alternative to centrifugation for intraoperative autotransfusion but, until efficiency is improved, it should only be used for cardiovascular surgery when excess heparin can be reversed with protamine.     

The rate of corrosion of concrete reinforcement and possibilities of its mathematical modelling

The paper describes a method for the mathematical modelling of steel reinforcement corrosion rate. This method is based exclusively on experimental results and expression of the influence of significant corrosion factors in the form of functional relations. The method takes into account the reality of the effects of corrosion factors, their contigency and complexity, and various circumstances occurring in practice. It represents one way towards the development of methods for the prediction of service life of reinforced concrete and structures.     

Lipid peroxidation and antioxidant system changes in acute L-arginine pancreatitis in rats

The World Wide Web-based form is a promising method for the construction of an on-line data collection system for clinical and epidemiological research. It is, however, laborious to prepare a common gateway interface (CGI) program for each project, which the World Wide Web server needs to handle the submitted data. In medicine, it is even more laborious because the CGI program must check deficits, type, ranges, and logical errors (bad combination of data) of entered data for quality assurance as well as data length and meta-characters of the entered data to enhance the security of the server. We have extended the specification of the hypertext markup language (HTML) form to accommodate information necessary for such data checking and we have developed software named AUTOFORM for this purpose. The software automatically analyzes the extended HTML form and generates the corresponding ordinary HTML form, 'Makefile', and C source of CGI programs. The resultant CGI program checks the entered data through the HTML form, records them in a computer, and returns them to the end-user. AUTOFORM drastically reduces the burden of development of the World Wide Web-based data entry system and allows the CGI programs to be more securely and reliably prepared than had they been written from scratch.