Violence detection in videos using interest frame extraction and 3D convolutional neural network

Multimedia Tools and Applications - With the rapid development of detecting violent behaviors in surveillance cameras, requests on systems that automatically recognize violent events are expanded....     

Co‐condensation synthesis of well‐defined mesoporous silica nanoparticles: effect of surface chemical modification on plasmid DNA condensation and transfection

Chemically modified mesoporous silica nanoparticles (MSNs) are of interest due to their chemical and thermal stability with adjustable morphology and porosity; therefore, it was aimed to develop and compare the MCM‐41 MSNs functionalised with imidazole groups (MCM‐41‐Im) to unmodified (MCM‐41‐OH) and primary amine functionalised (MCM‐41‐NH₂) MSNs for experimental gene delivery. The results show efficient transfection of the complexes of the plasmid and either MCM‐41‐NH₂ or MCM‐41‐Im. Furthermore, following transfection of HeLa cells using MCM‐41‐Im, an enhanced GFP expression was achieved consistent with the noticeable DNase1 protection and endosomal escape properties of MCM‐41‐Im using carboxyfluorescein tracer.Inspec keywords: condensation, mesoporous materials, silicon compounds, nanoparticles, DNA, surface chemistry, porosity, gene therapy, cellular biophysics, biomedical materials, nanomedicine, nanofabrication, molecular biophysics, biochemistryOther keywords: co‐condensation synthesis, surface chemical modification, plasmid DNA condensation, plasmid DNA transfection, chemical modified mesoporous silica nanoparticles, chemical stability, thermal stability, adjustable morphology, porosity, MCM‐41 MSN functionalisation, imidazole groups, MCM‐41‐OH, primary amine functionalised MSN, gene delivery, HeLa cell transfection, GFP expression, DNase1 protection, endosomal escape properties, carboxyfluorescein tracer, SiO₂      

Green synthesis of silver nanoparticles using flower extract of Malva sylvestris and investigation of their antibacterial activity

High‐quality colloidal silver nanoparticles (AgNP) were synthesised via a green approach by using hydroalcoholic extracts of Malva sylvestris. Silver nitrate was used as a substrate ion while the plant extract successfully played the role of reducing and stabilising agents. The synthesised nanoparticles were carefully characterised by using transmission electron microscopy, atomic‐force microscopy, energy dispersive X‐ray spectroscopy, Fourier transform infrared spectroscopy and UV–vis spectroscopy. The maximum absorption wavelengths of the colloidal solutions synthesised using 70 and 96% ethanol and 100% methanol, as extraction solvents, were 430, 485 and 504 nm, respectively. Interestingly, the size distribution of nanoparticles depended on the used solvent. The best particle size distribution belonged to the nanoparticles synthesised by 70% ethanol extract, which was 20–40 nm. The antibacterial activity of the synthesised nanoparticles was studied on Escherichia coli, Staphylococcus aureus and Streptococcus pyogenes using disk diffusion, minimum inhibitory concentrations and minimum bactericidal concentrations assays. The best antibacterial activity obtained for the AgNPs produced by using 96% ethanolic extract.Inspec keywords: silver, nanoparticles, nanofabrication, antibacterial activity, colloids, particle size, transmission electron microscopy, atomic force microscopy, X‐ray chemical analysis, Fourier transform spectra, infrared spectra, ultraviolet spectra, visible spectra, microorganisms, nanomedicine, biomedical materialsOther keywords: Green synthesis, flower extract, Malva sylvestris, antibacterial activity, high‐quality colloidal silver nanoparticles, hydroalcoholic extracts, plant extract, reducing agents, stabilising agents, transmission electron microscopy, atomic‐force microscopy, energy dispersive X‐ray spectroscopy, Fourier transform infrared spectroscopy, UV– vis spectroscopy, colloidal solutions, particle size distribution, Escherichia coli, Staphylococcus aureus, Streptococcus pyogenes, disk diffusion, minimum inhibitory concentrations, minimum bactericidal concentrations assays, ethanolic extract, size 430 nm, size 485 nm, size 504 nm, size 20 nm to 40 nm, Ag     

Photocatalytic abatement of naphthalene catalyzed by nanosized TiO2 particles: Assessment of operational parameters

Naphthalene removal from wastewater sources was investigated in a batch slurry system using photocatalytic process as a subset of advanced oxidation processes. At low concentrations of naphthalene, the pseudo-first order rate equation on the base of Langmuir-Hinshelwood model described the degradation kinetics very well. Also, the photocatalytic process was employed to evaluate the effect of various operational parameters such as agitation speed (0–200 rpm), injected air flow (0–6 L/h), TiO₂ concentration (0–3 g/L) and UV power intensity (0–24 W). Experimental results demonstrated that by increment in the mass transfer coefficient, the agitation speed positively affected naphthalene degradation. Due to the “screening effect”, concentration of TiO₂ showed an optimum amount equal to 2 g/L. Aeration to the solution affected the amount of oxygen as an electron scavenger and so enhanced naphthalene degradation rate. Meanwhile in the absence of UV radiation to the solution, the rate of naphthalene removal decreased significantly. In other hand, augmentation in UV radiation more than 8 W had a low influence on the amount of removed naphthalene and reaction rate.     

Work sequencing in a manufacturing cell with limited labour constraints

This study focuses on the analysis of group scheduling heuristics in a dual-constrained, automated manufacturing cell, where labour utilization is limited to setups, tear-downs and loads/unloads. This scenario is realistic in today's automated manufacturing cells. The results indicate that policies for allocating labour to tasks have very little impact in such an environment. Furthermore, the performance of efficiency oriented, exhaustive, group scheduling heuristics deteriorated while the performance of the more complex, non-exhaustive heuristics improved. Thus, it is recommended that production managers use the simplest labour scheduling policy, and instead focus their efforts to activities such as job scheduling and production planning in such environments.     

Ultrasound-promoted one-pot four-component synthesis of novel biologically active 3-aryl-2,4-dithioxo-1,3,5-triazepane-6,7-dione and their toxicity investigation

We have described a novel four-component reaction (4MCR) between oxalyl chloride 1, anilines 2a–h, and two molecules of ammonium thiocyanate 3 in acetone under ultrasound irradiation to give 3-aryl-2,4-dithioxo-1,3,5-triazepane-6,7-diones. A synthetically useful ultrasound effect was observed and title products were obtained in high yields after 15–35?min sonication. Our procedure compared to the conventional heating method has the benefit of higher reaction yields and shorter reaction times. The IR spectra showed the presence of N–H, C═O and C═S groups in these compounds and ¹H, ¹³C NMR and Mass spectral results verified their structures. Cellular investigations showed that these compounds are toxic toward cancer cells.     

Novel Low-Overhead Operand Isolation Techniques for Low-Power Datapath Synthesis

Power consumption in datapath modules due to redundant switching is an important design concern for high-performance applications. Operand isolation schemes that reduce this redundant switching incur considerable overhead in terms of delay, power, and area. This paper presents novel operand isolation techniques based on supply gating that reduce overheads associated with isolating circuitry. The proposed schemes also target leakage minimization and additional operand isolation at the internal logic of datapath to further reduce power consumption. We integrate the proposed techniques and power/delay models to develop a synthesis flow for low-power datapath synthesis. Simulation results show that the proposed operand isolation techniques achieve at least 40% reduction in power consumption compared to original circuit with minimal area overhead (5%) and delay penalty (0.15%)     

Nanophotocatalysis using immobilized titanium dioxide nanoparticle: Degradation and mineralization of water containing organic pollutant: Case study of Butachlor

In this paper, the degradation and mineralization of Butachlor in aqueous solution by nanophotocatalysis using immobilized TiO₂ nanoparticles were investigated. Butachlor (N-butoxymethyl-2-chloro-2′,6′-diethylacetanilide) is a persistent organic pollutant in agricultural soil and watercourses. A simple and effective method was used for immobilization of titanium dioxide nanoparticles. UV-vis and Ion Chromatography (IC) analyses were employed to obtain the details of the photocatalytic degradation and mineralization of Butachlor. The effects of operational parameters such as H₂O₂, inorganic anions (NO₃⁻, Cl⁻ and SO₄²⁻) and pH were investigated. The lack of any absorbance in 254 nm was indicative of the complete degradation of aromatic intermediates. The mineralization of Butachlor was evaluated by monitoring of the formed inorganic anions (NO₃⁻ and Cl⁻). Butachlor is effectively degraded following first order kinetics model. Results show that the immobilized titanium dioxide nanoparticle photocatalysis is an effective method for treatment Butachlor from contaminated water.     

Low-power scan design using first-level supply gating

Reduction in test power is important to improve battery lifetime in portable electronic devices employing periodic self-test, to increase reliability of testing, and to reduce test cost. In scan-based testing, a significant fraction of total test power is dissipated in the combinational block. In this paper, we present a novel circuit technique to virtually eliminate test power dissipation in combinational logic by masking signal transitions at the logic inputs during scan shifting. We implement the masking effect by inserting an extra supply gating transistor in the supply to ground path for the first-level gates at the outputs of the scan flip-flops. The supply gating transistor is turned off in the scan-in mode, essentially gating the supply. Adding an extra transistor in only one logic level renders significant advantages with respect to area, delay, and power overhead compared to existing methods, which use gating logic at the output of scan flip-flops. Moreover, the proposed gating technique allows a reduction in leakage power by input vector control during scan shifting. Simulation results on ISCAS89 benchmarks show an average improvement of 62% in area overhead, 101% in power overhead (in normal mode), and 94% in delay overhead, compared to the lowest cost existing method.     

Effect of different acids during the synthesis of urea-formaldehyde adhesives and the mechanical properties of medium-density fiberboards bonded with them

The characteristics of urea-formaldehyde (UF) adhesives condensed by catalysis with four different acids, namely formic (HCOOH), hydrochloric (HCl), phosphoric (H₃PO₄), and sulfuric (H₂SO₄) acids, under alkaline–acidic–alkaline conditions at a molar ratio F/U = 1.12 were studied. The thermal curing properties of UF adhesives catalyzed with acid were characterized by differential scanning calorimetry at 10 °C/min heating rate. The resin structure examined by ¹³C-NMR spectroscopy showed that the resin catalyzed with HCl had a lower proportion of methylol groups, resulting in a lower level of formaldehyde emission. It was interesting to note that HCOOH resulted in the best overall mechanical properties of the medium-density fiberboard (MDF) panels. The HCl catalyst resulted in the poorest performance, providing the lowest internal bond strength, modulus of elasticity, and thickness swelling, with the exception of the free formaldehyde content. The resin catalyzed with H₂SO₄ had the highest free formaldehyde and the highest formaldehyde emission. H₂SO₄ and H₃PO₄ resulted in MDF mechanical properties relatively lower than for HCOOH. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47256.