Simulation of the submerged energy nozzle-mold water model system using laser-optical and computational fluid dynamics methods

The present work describes quantitative digital particle image velocimetry measurements of a full-scale water model of a thin slab mold. Different casting speeds and two submerged entry nozzles with one and two outlet ports have been investigated. The flow pattern of the single-port nozzle shows a counterclockwise-rotating double vortex that is nearly steady-state but leads to high stationary surface waves. The flow jets out of the two-port nozzle oscillate and produce a transient flow pattern with low wave amplitudes. The amplitudes for the one-port nozzle show a linear variation with the volumetric flow rate. The experimental results lead to a good interpretation of the flow phenomena and are used to validate steady-state numerical simulations with the commercial program, CFX, on the basis of the Reynolds equations. To describe anisotropic turbulence effects, the Reynolds stress model (RSM) is used for the flat single-port nozzle and the standard k-ɛ model for the mold flow. The calculated mean velocities and wave amplitudes, predicted from pressure distribution at the water surface, are generally in the consensus of the experimental data. An erratum to this article is available at .     

C3a is a chemotaxin for human eosinophils but not for neutrophils. I. C3a stimulation of neutrophils is secondary to eosinophil activation

Inflammatory action of the potent chemotaxin C5a has been well characterized on a variety of human cell types, including neutrophils, monocytes, basophils, and eosinophils. The cellular effects of C3a are less well defined. Contradictory reports have been published for C3a activation of neutrophils. Recent reports that C3a activates both basophils and eosinophils prompted us to reinvestigate the effects of C3a stimulation on eosinophils. We hypothesized that C3a activation of eosinophils, cells that are present in most neutrophil preparations, might lead to neutrophil activation. Using neutrophils of 98% purity, we observed no evidence of cellular activation after stimulation with either C3a, recombinant human C3a (rhC3a), or the synthetic C3a analogue C3a 57-77, Y57. Eosinophils purified to > 98% purity displayed concentration-dependent polarization, chemotaxis, and enzyme release by stimulation with C3a, rhC3a, and the synthetic C3a analogue. An inactive form of C3a, C3adesArg, failed to stimulate either eosinophils or neutrophils. Using neutrophil preparations containing 5-9% eosinophils, up to 20% of neutrophils became polarized after exposure to C3a. Likewise, we demonstrated that supernatant from C3a-stimulated eosinophils promotes neutrophil chemotaxis. Eosinophil polarization experiments were repeated in the presence of antibody to the C5a receptor (C5aR) to show that C3a and C5a interact with different receptors. C3a activates eosinophils in the presence of anti-C5aR antibody at concentrations that fully block C5a activation. We conclude that eosinophils are directly activated by either C3a or C5a, whereas C3a failed to activate neutrophils. C3a acts on eosinophils via a receptor that is distinct from C5aR. Since neutrophils are indirectly stimulated by C3a, eosinophils contaminating neutrophil preparations may explain earlier reports that C3a activates human neutrophils.     

Molecular orientation and relaxation in poly(butylene terephthalate)/polycarbonate blends

Rheo-optical Fourier-transform infrared (FTIR) spectroscopy is based on the simultaneous acquisition of stress-strain data and FTIR spectra on-line to the mechanical treatment of polymers and is frequently applied for the characterization of transient structural changes during deformation and stress-relaxation. In the present communication, this technique has been employed in order to investigate the distribution of molecular orientation and its relaxation in uniaxially drawn solution-cast films of semicrystalline partial miscible blends of poly(butylene terephthalate) (PBT) with polycarbonate (PC) containing 10, 30 and 50 wt% PC. The uniaxial deformation of these blend films having a PBT-crystallinity degree ranging from 31 to 12%, in unstretched blends, leads to a appreciable high segmental orientation for the crystalline PBT due to a structural transformation from lamellae to microfibrils. The formation of this fibrillar structure is attributed to non-reversibility of an extended phase with all-trans conformational sequence of the aliphatic segments of PBT, occurring during elongation. The rate of relaxation of this conformational transition, however, increases with increasing amorphous content in the blends. Also it is observed that even with increasing amorphous content in the PBT/PC blends the crystalline PBT shows significant orientation. In such cases, apart from the few lamellae which transform to microfibrils, it is suggested that a stress induced transformation of PBT chains in amorphous PBT-component to irreversible all-trans extended crystalline form also contributes to PBT crystalline orientation. In contrast with this high crystalline orientation, the amorphous PBT located in the interlamellar regions inside the PBT-spherulites show a lower orientation in blends as compared in pure PBT.On the other hand, an overall segmental orientation of PC chains in blends is of lower order which is attributed mainly to low stretching temperature compared to T_g of pure PC. The results are discussed in terms of the resulting spherulitic morphology and the temporary network formed by the elongated PBT and PC chains inside the interlamellar regions, in blends.     

Control of material flow in a combined backward can - forward rod extrusion

The paper deals with an analysis of an extrusion process with a divided material flow. As we are forced to seek for optimal technological solutions with short testing times and low risks and costs, a reliable process evaluation is of the greatest importance.

The paper discusses the influences of tool geometry, friction and lubrication as well as workpiece properties on balanced material flow in a combined extrusion process. The FEM analysis applying the DEFORM code has been used in order to predict the process parameters and to estimate its stability. The subsequent experimental verification has resulted in a conclusion that modern computer aided tools, tuned by proper experimental sets, can be used for fast and reliable cold metal forging process planning.     

Quality management in service ecosystems

Service-oriented architectures and Web services mature and have become more widely accepted and used by industry. This growing adoption increased the demands for new ways of using Web service technology. Users start re-combining and mediating other providers’ services in ways that have not been anticipated by their original provider. Within organisations and cross-organisational communities, discoverable services are organised in repositories providing convenient access to adaptable end-to-end business processes. This idea is captured in the term Service Ecosystem. This paper addresses the question of how quality management can be performed in such service ecosystems. Service quality management is a key challenge when services are composed of a dynamic set of heterogeneous sub-services from different service providers. This paper contributes to this important area by developing a reference model of quality management in service ecosystems. We illustrate the application of the reference model in an exploratory case study. With this case study, we show how the reference model helps to derive requirements for the implementation and support of quality management in an exemplary service ecosystem in public administration.     

A new method for in situ measurement of parameters and degradation processes in modern nanoscale programmable devices

This paper presents a new method and results from measurement of internal parameters of programmable nanoscale circuits, namely Xilinx FPGA devices and especially Zynq SoC devices designed on 28 nm TSMC’s technology and older 45 nm Spartan 6 device as well as Xilinx Virtex product lines. The method utilizes a new undersampling approach for frequency measurement and an easy way of processing BRAM data streams. The proposed flexible circuits have been used in various measurements of timing parameters and delays in FPGAs, including measurements or detection of the aging issues. The paper presents results of measurements under various core voltage values as performed on selected Xilinx FPGA platforms, including key results about limited usability of the latest 28 nm devices under accelerated conditions and possibility of studying or mitigating aging effects in FPGAs. The paper presents rare results of experiments, real measurements and data available from current as well as previous technology nodes and it attempts to uncover new facts and areas of the latest high-end technologies, including the area of aging and degradation processes in general. The new methodology, presented approach and results can also be used in various dependable systems, including selected aerospace, medical, automotive or transportation ones. It is also directly and easily applicable to modern processor and multicore systems.