Properties of Carbopol Solutions as Models for Yield-Stress Fluids

ABSTRACT: The effect of pH on the non-Newtonian viscosity (η)of aqueous Carbopol 940 solutions is presented with high resolution (pH increments about 0.4) between pH = 2.8 and 12.7. Aqueous NaOH was used to adjust pH of 1.48 wt % Carbopol solutions. A Contraves viscometer was used to measure steady-flow shear stress at known shear rate (γ) over the range γ= 8 to 195 s⁻¹. Yield stresses and shear-thinning η(γ) were observed. Data were fitted with a Herschel-Bulkley model, whose parameters (including yield stress) were expressed as functions of pH. Comparisons were made of η(γ) to the dynamic viscometric properties η'(ω) and η*(ω) for comparable ranges of γ and frequency (ω): A fairly close match was found between η and η* but η«η'. pH dependence included previously unreported extrema of h(pH) in the range of pH = 6.2 to 6.6. Because of sensitive control of rheological properties with pH, Carbopol solutions can be used to mimic a great range of shear-thinning and yield-stress behavior that should make them useful for model studies directed toward process and equipment design and evaluation.     

High-dose chemotherapy with carboplatin, etoposide and cyclophosphamide followed by a haematopoietic stem cell rescue in patients with high-risk retinoblastoma: a SFOP and SFGM study

This study investigates the role of high-dose chemotherapy with haematopoietic stem cell rescue as consolidation treatment in high-risk retinoblastoma (extraocular disease at diagnosis or relapse or invasion of cut end of optic nerve). 25 patients received high-dose chemotherapy including carboplatin (250 mg/m2/day from day 1 to day 5 for the 6 first patients and 350 mg/m2/day from day 1 to day 5 for the other patients), etoposide (350 mg/m2/day from day 1 to day 5) and cyclophosphamide (1.6 g/m2/day from day 2 to day 5) (CARBOPEC) followed by autologous haematopoietic stem cell rescue. 19 patients received this drug combination for chemosensitive extraocular relapse. The other 6 patients with histological high-risk factors were given this treatment as consolidation after enucleation and conventional chemotherapy. The three year disease-free survival was 67.1%. In 7 of the 9 relapsing patients, the first site of relapse was the central nervous system. All patients with central nervous system disease died except one. The main toxicity was haematological and digestive (mucositis and diarrhoea). 2 of the 13 evaluable patients had grade III and IV ototoxicity. One patient experienced an acute grade I reversible cardiotoxicity. The CARBOPEC regimen seems to be a promising therapeutic strategy in patients with high-risk retinoblastoma, especially those with bone and/or bone marrow involvement. This treatment did not improve the outcome of patients with central nervous system disease.     

A numerical model for single screw extrusion with poly(vinyl chloride) (PVC) resins

A computer model has been developed to simulate the behavior of molten polymer in the melt conveying zone of extruders. This model, based on a hybrid finite difference/finite element resolution of the equations of change governing momentum and heat transfer, allows the prediction of the pressure profile while accounting for wall end effects as well as the solid bed velocity. Simulation results are compared with analytical and finite difference method results found in the literature. A fairly good agreement is obtained in the case of low density polyethylene. Numerical tests are also carried out with rigid poly(vinyl chloride) compound used for window profile extrusion. The good agreement found between the predictions and experimental measurements obtained on an industrial extruder confirms the performance of the proposed model.     

POWER CONSUMPTION WITH ANCHOR MIXERS EFFECT OF BOTTOM CLEARANCE

The effect of bottom clearance on power draw for anchors is investigated. The results suggest that power input decreases as the bottom clearance ratio b/D increases. A new correlation is proposed in which both bottom and wall clearance effects on power input are considered. The dependence of power input on these effects is additive rather than multiplicative. Thus, the total power consumption is the sum of the power inputs generated by the wall and bottom clearance. Power results from 3D-CFD numerical simulations are also presented. These results confirm fairly well the experimental points.     

Gas/liquid dispersions with a SMX static mixer in the laminar regime

A Sulzer SMX mixer was used to disperse gas into viscous, Newtonian and non-Newtonian fluids. The investigation covered the effect of the dispersed phase volume fraction, the viscosity of the continuous phase, the mixer length and the power draw. The flow regime was kept laminar in all the experiments. The dispersion of gas was carried out with gas concentrations between 1% and 7% in volume. Using the “process viscosity” concept, it was possible to collapse all the measured sizes on a single master curve by using the energy consumption in the mixer as the common variable between the experiments. Comparison was made with a Kenics mixer. The SMX mixer was found to be better adapted to the dispersion task due to its internal structure.     

Filtering artificial texts with statistical machine learning techniques

Fake content is flourishing on the Internet, ranging from basic random word salads to web scraping. Most of this fake content is generated for the purpose of nourishing fake web sites aimed at biasing search engine indexes: at the scale of a search engine, using automatically generated texts render such sites harder to detect than using copies of existing pages. In this paper, we present three methods aimed at distinguishing natural texts from artificially generated ones: the first method uses basic lexicometric features, the second one uses standard language models and the third one is based on a relative entropy measure which captures short range dependencies between words. Our experiments show that lexicometric features and language models are efficient to detect most generated texts, but fail to detect texts that are generated with high order Markov models. By comparison our relative entropy scoring algorithm, especially when trained on a large corpus, allows us to detect these “hard” text generators with a high degree of accuracy.     

Optimized silyl ester diblock methacrylic copolymers: A new class of binders for chemically active antifouling coatings

This work focuses on the assessment of the erosion properties and antifouling (AF) performance of silyl ester copolymer-based coatings through laboratory and field tests. Silyl ester diblock copolymers were synthesized via the reversible addition-fragmentation chain transfer polymerization and were selected as binders for developing copper-free chemically active coatings. AF coatings were subsequently prepared using biocides (Sea-Nine™ 211, Preventol^® A4S, and zinc pyrithione). Laboratory-based bioassays, targeting the growth of selected microorganisms (bacteria and microalgae) and barnacle settlement, highlighted that the silyl ester methacrylic-based binders did not inhibit the growth of microorganisms, are essentially non-toxic to nauplii and reduced the settlement of Amphibalanus amphitrite cyprids. The corresponding biocidal coatings are potent toward bacteria and diatoms but were demonstrated to be toxic against the barnacle larvae. Field test results showed variations with geographical locations: in sub-tropical area, the silyl ester methacrylic-based coatings failed to inhibit the settlement of barnacles; however, field tests performed in Mediterranean Sea for 18 months demonstrated that biocidal silyl ester methacrylic-based coatings were promising candidates.