Scientific Workflow Makespan Minimization in Edge Multiple Service Providers Environment

The edge computing model offers an ultimate platform to support scientific and real-time workflow-based applications over the edge of the network. However, scientific workflow scheduling and execution still facing challenges such as response time management and latency time. This leads to deal with the acquisition delay of servers, deployed at the edge of a network and reduces the overall completion time of workflow. Previous studies show that existing scheduling methods consider the static performance of the server and ignore the impact of resource acquisition delay when scheduling workflow tasks. Our proposed method presented a meta-heuristic algorithm to schedule the scientific workflow and minimize the overall completion time by properly managing the acquisition and transmission delays. We carry out extensive experiments and evaluations based on commercial clouds and various scientific workflow templates. The proposed method has approximately 7.7% better performance than the baseline algorithms, particularly in overall deadline constraint that gives a success rate.

     

Novel Cost Efficient Resource Allocation Technique Based on Deadline and Budget Constraints for Edge Users

Wireless Personal Communications - The edge computing paradigm has experienced quick development in recent years. This paradigm is featured by pushing the storage and computational resources closer...     

The synergistic effect of seawater's parameters on the corrosion rate of the austenitic stainless steel 304

In this article the corrosion rate of the austenitic stainless steel type 304, under the synergistic effect of environmental factors has been assessed via potentiodynamic polarization scan. Salinity, velocity, pH and temperature are the factors which induce effects on the corrosion rate of the considered metal. Quantitative analysis is applied using the full two-level factorial experimental design method, which results in the contribution value of each parameter in changing the quantity of average corrosion rate in both individual and synergistic cases. Besides this quantitative analysis, qualitative analysis has been used to predict the variation direction. These two analyses show the important role of the synergistic action, which changes the variation direction of corrosion rate and the contribution percentage of each parameter in varying the value of corrosion rate. Applying both these analyses can show the magnitude and quality of each parameter’s effect, which is remarkably valuable in marine applications.     

Synthesis and characterization of copolymers of poly(ethylene terephthalate) and cyclohexane dimethanol in a semibatch reactor (including the process model)

Although poly(ethylene terephthalate) (PET) has excellent basic properties, this polymer tends to crystallize rapidly and has a rather high melting temperature, a low glass‐transition temperature, and low impact on notched articles for some potential applications. Copolymerization is a reasonable method for improving the properties of PET. 1,4‐cyclohexane dimethanol (CHDM) is one of the most important comonomers for PET. In this research, PET and PET copolymers containing 5–30% CHDM were prepared from comonomer mixtures by two‐step melt polycondensation. The copolymers were synthesized in a home‐made laboratory setup. The first synthesis step was conducted under pressure, and the second was performed in vacuo at a high temperature (230–290°C). The microstructure of the synthesized copolymers was studied with Fourier transform infrared and nuclear magnetic resonance. The comonomer content in the polymer chain was determined from the nuclear magnetic resonance spectrum. The presence of the comonomer in the copolymer chain was random. Differential scanning calorimetry was used to study the thermal properties of the copolymers to detect changes in the polymer properties. CHDM reduced the heat of fusion and melting and glass‐transition temperatures of the PET copolymers. Process modeling was performed with mass balances of different functional groups and species. Equations of mass balances were integrated numerically. Numerical simulation and experimental results were in very good agreement. By modeling, the effects of the reaction temperature and feed molar ratio on the conversion and formation of diethylene glycol were studied. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

High-level evidences in endodontics

Number of published medical/dental articles is growing at an exponential rate; this makes it difficult to collect all these resources and provide an organized and valuable/useful document. Systematic reviews and meta-analyses as high-level evidences are considered remedies for this concern. Continuous alterations in all fields of dental sciences necessitate the more of such high-level evidences. This study aimed on the quantity of endodontic systematic reviews and meta-analyses so far. This study began with targeted electronic searches of PubMed, and Cochrane library databases about the present systematic review and meta-analysis articles in endodontics within 2001–Jan 2012. Overall, 49 studies were systematic review and meta-analysis, the first comprised 34 articles and the latter contained seven articles; the remained eight studies had utilized both of them. Performing a topic sorting, 22 articles were about materials and techniques, 12 about pre- and post-treatment considerations, four about single/multiple visits, six with perio-prostho themes, and the five remained were of other topics. Limited number of 49 high-level evidences does not meet the expectation from endodontics as a boundless and progressive field of science. Therefore, more comprehensive and all-inclusive studies of systematic reviews and meta-analyses are compulsory in endodontics. The more the scientific-based endodontic practice, the more the high-level evidence based publications with good systematic reviews and favorable meta-analysis.     

Influence of impregnation with lactic acid on sugar yields from steam pretreatment of sugarcane bagasse and spruce, for bioethanol production

Lignocellulosic biomass can be utilized to produce ethanol, a promising alternative energy source produced through fermentation of sugars. However, in order to achieve high sugar and ethanol yields, the lignocellulosic material must be pretreated before the enzymatic hydrolysis and fermentation. Dilute acid pretreatment, using SO₂, is one of the most promising methods of pretreatment for softwood and agricultural residues. However, handling the high acidity of the slurry obtained from pretreatment and difficulty in recycling/degradation of the impregnating agent are some of the drawbacks of the dilute acid processes. In the present study the influence of utilization of a weak organic acid (lactic acid), as impregnating agent, on the sugar yield from pretreatment, with and without addition of SO₂, was investigated. The efficiency of pretreatment was assessed by enzymatic hydrolysis of the slurry obtained by pretreatment, using sugarcane bagasse and spruce, stored for one and two months in the presence of lactic acid separately, as feedstocks. Pretreatment of bagasse after storage with 0.5% lactic acid resulted in an overall glucose yield, i.e. after enzymatic hydrolysis, of 79% of theoretical based on the amount available in the raw material. This was as good as pretreatment using SO₂ as impregnating agent. However, storage of spruce with lactic acid before pretreatment, with and without addition of SO₂, was not efficient and resulted in lower sugar yields than pretreatment using SO₂ only.     

Creep‐fatigue behaviour of single‐crystal Ni‐base superalloy CMSX‐8

The creep‐fatigue behaviour of a lower cost, reduced rhenium Ni‐base superalloy, CMSX‐8, a variant of CMSX‐4, cast in a single crystal was experimentally evaluated over a broad range of conditions, from room temperature to 1100°C, and for two loading orientations: <001> and <111>. The fatigue lives depend on the orientation, cycle type, and temperature. The relative importance of these parameters on influencing the life is identified and discussed. From this understanding, a simple life model is constructed to capture the influence of these broad test conditions. The results are compared with those of the higher Re superalloy, CMSX‐4.     

Raman spectroscopic investigation and thermoelectric studies of defect-induced Mg-doped delafossite thin film

Journal of Materials Science: Materials in Electronics - Here, we modified the band structure of P-type Mg-doped CuCrO2 thin films by defect-induced lattice compressive strain. A significant...     

Nanoparticulation of enzymatically cross-linked whey proteins to encapsulate caffeine via microemulsification/heat gelation procedure

A co-surfactant free microemulsion was formulated with sunflower oil, span 80 and whey protein solution and used as nanoreactor to generate caffeine-enveloping capsules through heat gelation of protein. Transglutaminase-induced cross-linking of proteins prior to microemulsification decreased the mean diameter from 478 to 318 nm for core-free particles and from 232 to 118 nm for capsules. As well, the lower limit of capsules size decreased from 78 nm to 45 nm due to enzymatic cross-linking. Scanning electron microscopy showed that morphology of particles and capsules was not completely spherical which was attributed to the protrusion of protein molecules out of aqueous droplets during gelation. The enzymatic treatment yielded in particles with higher glass transition temperature due to the reinforced structure of particulate gel. Fourier transform infrared spectroscopy confirmed the structural changes in proteins by heat and establishment of covalent cross-linkages by the enzyme action manifested by a band at 1078 cm⁻¹.     

Correction to: A review of machine learning-based human activity recognition for diverse applications

Neural Computing and Applications -