Smart Edge Computing for 5 g/6 g Satellite IOT for Reducing Inter Transmission Delay

Mobile Networks and Applications - 5G/6G communication are first generation high speed wireless communication network which integrates the aerial data, terrestrial data and maritime data via...     

Electrical Insulation Characteristics of Silicone and EPDM Polymeric Blends. I

The typical parts of a polymeric insulator are core, metal end fittings and polymeric housing material. The housing is intended to protect the fibre glass rod from the environment and electrical surface discharges. Since the housing materials are made of organic polymeric material, its insulation characteristics need to be studied. Amongst the many different polymers available, this work focuses on silicone rubber and ethylene propylene diene monomer (EPDM). Blends of EPDM and silicone rubber are prepared in a two roll mixing mill. Dicumyl peroxide is used as vulcanizing agent. The blends consisting of various proportions of component polymers are prepared, compression moulded into sheets, and post cured. The blends are tested for their insulation characteristics as per IEC and ASTM standards. Volume and surface resistivity, dielectric strength, dielectric constant, tan delta, tracking resistance, arc resistance, comparative tracking index, tensile strength, and percentage elongation at break of the blends are studied and discussed. The test results show that the increasing proportion of silicone enhances the electrical insulation properties whereas increasing weight percentage of EPDM improves the mechanical strength of the blends.     

Comparison of TiAIN,AICrN, and AICrN/TiAIN coatings for cutting-tool applications

Monolayer and bilayer coatings of TiAlN, AlCrN, and AlCrN/TiAlN were deposited onto tungsten carbide inserts using the plasma enhanced physical vapor deposition process. The microstructures of the coatings were characterized using scanning electron microscopy （SEM） and atomic force microscopy （AFM）. The SEM micrographs revealed that the AlrN and AlCrN/TiAlN coatings were uniform and highly dense and contained only a limited number of microvoids. The TiAIN coating was non-uniform and highly porous and contained more micro droplets. The hardness and scratch resistance of the specimens were measured using a nanoindentation tester and scratch tester, respectively. Different phases formed in the coatings were analyzed by X-ray diffraction （XRD）. The AlCrN/TiAlN coating exhibited a higher hardness （32.75 GPa）, a higher Young＇s modulus （561.97 GPa）, and superior scratch resistance （LcN = 46 N） compared to conventional coatings such as TiAlN, A1CrN, and TiN.     

Investigation of TiAlN coated roller burnishing on Al-(B4C)p MMC workpiece material

Burnishing avoids the need for super finishing operations after the conventional turning process, to enhance the surface quality. This paper deals with the surface modifications of Al(B₄C)_p Metal Matrix Composites (MMC) workpiece material after burnishing with a TiAlN coated WC roller. The burnishing speed, lubrication type, burnishing passes, and coating were the input parameters. Surface hardness and roughness after the burnishing were studied. It was found that the coating on the WC roller had enhanced the hardness in the workpiece after burnishing in the case of Al-5?wt.% (B₄C)_p, under all conditions. The effect of the coating on the work piece surface hardness was not significant with Al-10?wt.% (B₄C)_p. While burnishing Al-5?wt.% (B₄C)_p, the minimum surface roughness combined with maximum surface hardness was obtained, during the third pass under dry condition using uncoated rollers. The number of passes to achieve the desired surface conditions reduced, on using coated rollers with kerosene as the lubricant.     

Parametric study on a coaxial multi-material powder flow in laser-based powder deposition process

The manner with which the composite powder particles injected into the laser formed molten pool decides the deposition quality in a typical laser-based powder deposition of composite material. Since, the morphology and physical properties of nickel (Ni) and tungsten carbide (WC) are different their powder flow characteristics such as the powder particles stream structure, maximum concentration at the converging spot, and the powder particles velocity are noticeably different. In the current study, a computational fluid dynamics (CFD) based powder flow model is established to characterize the coaxial powder flow behavior of Ni–WC composite powders. The key powder flow characteristics such as the stand-off distance, the diameter of the powder stream at the stand-off distance, and the velocity of the powder particles are measured using three different vision based techniques. Both the numerical and experimental results reveal the exact stand-off distance where the substrate needs to be placed, the diameter of the concentration spot of powder at the stand-off distance, and a combination of suitable nozzle angle, diameter, and carrier gas flow rate to obtain a maximum powder concentration at the stand-off distance with a stable composite powder flow.     

In situ synthesised TiO2 ‐chitosan‐chondroitin 4–sulphate nanocomposites for bone implant applications

The artificial materials for bone implant applications are gaining more importance in the recent years. The series titania‐chitosan‐chondroitin 4–sulphate nanocomposites of three different concentrations (2:1:x, where x ‐ 0.125, 0.25, 0.5) have been synthesised by in situ sol–gel method and characterised by various techniques. The particle size of the nanocomposites ranges from 30–50 nm. The bioactivity, swelling nature, and the antimicrobial nature of the nanocomposites were investigated. The swelling ability and bioactivity of the composites is significantly greater and they possess high zone of inhibition against the microorganisms such as Staphylococcus aureus and Escherichia coli. The cell viability of the nanocomposites were evaluated by using MG‐63 and observed the composites possess high cell viability at low concentration. The excellent bioactivity and biocompatibility makes these nanocomposites a promising biomaterial for bone implant applications.Inspec keywords: titanium compounds, filled polymers, nanocomposites, bone, orthopaedics, biomedical materials, sol‐gel processing, nanofabrication, particle size, swelling, microorganisms, cellular biophysics, nanomedicine, prostheticsOther keywords: in situ synthesised TiO₂ ‐chitosan‐chondroitin 4‐sulphate nanocomposites, bone implant applications, artificial materials, in situ sol‐gel method, particle size, swelling nature, antimicrobial nature, microorganisms, Staphylococcus aureus, Escherichia coli, cell viability, MG‐63, biomaterial, size 30 nm to 50 nm, TiO₂      

Amalgamation and application of nano chitosan cross‐linked with fish scales based activated carbon as an adsorbent for the removal of reactive dye (RB9)

The extensive discomfort in the expulsion of toxic pollutants even at mild concentrations has demanded the need for prompt methods for the evacuation of dyes and heavy metals. The effective method for depuration of dye from the effluent is by sorption. Chitosan is a bio‐polymer which is gaining an increasing interest as one of the sorbents. It was obtained from the crab shells by undergoing several chemical processes and used as an adsorbent for dye, metal removal and also for pharmaceutical purposes. Cross linking it with other co polymers will increase the capacity of adsorption to a maximum level. Fish scales are considered to be a major waste in the food industry and since it takes a long time for decomposing it is considered to be one of the pollutants. Hence it is utilised by converting it into activated carbon by preliminary treatment and into a muffle furnace. The obtained activated carbon is combined with chitosan by using a cross linker and utilised for adsorption mechanism. To analyse the effect of chitosan cross linked with activated carbon obtained from fish scales in adsorption of dye Reactive Blue 9 (RB9) to evaluate the adsorption studies, kinetics, mass transfer studies, thermodynamics of the bio adsorbent.Inspec keywords: dyes, wastewater treatment, effluents, mass transfer, activated carbon, adsorption, polymer blends, water pollution control, thermodynamics, reaction kinetics, furnaces, recycling, industrial waste, waste recovery, food processing industry, pharmaceutical industry, renewable materials, nanoparticles, toxicologyOther keywords: fish scales, activated carbon, reactive dye removal, toxic pollutants, heavy metals, bio‐polymer, nanochitosan, bio adsorbent, amalgamation, RB9 dye, industrial effluent, crab shells, adsorption method, pharmaceutical purposes, copolymers, food industry waste, waste recovery, recycling process, muffle furnace, reaction kinetics, mass transfer, thermodynamic analysis, ReactiveBlue 9, wastewater treatment, water pollution control, C     

Parametric study on buckling behaviour of dented short carbon steel cylindrical shell subjected to uniform axial compression

Generally, thin cylindrical shells are susceptible for geometrical imperfections like non-circularity, non-cylindricity, dents, swellings, etc. All these geometrical imperfections decrease the static buckling strength of thin cylindrical shells, but in this paper only effect of a dent on strength of a short (Lc/Rc∼1, Rc/t=117, 175, 280) cylindrical shell is considered for analysis. The dent is modeled on the FE surface of perfect cylindrical shell for different angles of inclination and sizes at half the height of cylindrical shell. The cylindrical shells with a dent are analyzed using non-linear static buckling analysis. From the results it is found that in case of shorter dents, size and angle of inclination of dents do not have much effect on static buckling strength of thin cylindrical shells, whereas in the case of long dents, size and angle of inclination of dents have significant effect. But both short and long dents reduce the static buckling strength drastically. It is also found that the reduction in buckling strength of thin cylindrical shell with a dent of same size and orientation increases with increase in shell thickness.     

在双镶嵌铜互联中O.13微米器件生成用的基于PVD和ALD阻挡层的先进技术

1. Introduction The requirement of minimal bottom coverageand thick sidewall coverage for PVD-based films forlow via resistance and improved stress migration isnot easy to achieve with traditional depositionmethods. Modern I-PVD techniques give high bot-tom coverage, due to the ionized component of thedeposition flux. Sidewall coverage tends to be low,which is mainly due to off-normal deposition fluxand a less than unity sticking coefficient.