Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...     

Synthesis of heterocyclic metal complexes and their evaluation as marine antifoulants

4-Amino-3-thio-1,24-triazolidine (L₁) and 4-amino-5-thio-1,3,4-thiadiazole (L_II) as well as their metal complexes of the general formulae ML_I·2H₂O and ML_IICl (M; Pb(II), Cd(II) and Zn(II)) were prepared. With Sn(II), we obtained Sn(L_I)₂·2H₂O and SnL_IICl, respectively. The structures of the compounds were identified through elemental analysis, and IR and UV spectra measurements, in addition to thermal analysis in case of the metal complexes. The antifouling properties of the compounds were tested by their incorporation into paint formulations which were applied to PVC substrates and tested in water from Alexandria western harbour. When the compounds were added at 17·5% by volume, the coated panels were fouled after 3 months of immersion. The addition of 6·7% by volume of tributyltin oxide to 15·8% of the prepared compounds in one formulation elevated the paint efficiency and prevented fouling for 11 months. Paint containing solely tributyltin oxide at the same concentration was inactive against algae.     

A new boundary finite element method for fluid–structure interaction problems

In order to study problems on fluid–structure interaction, we have used a mixed formulation which couples the classical functional of the structure with a new variational formulation by integral equations for the fluid. This formulation has the advantage over the finite element methods of avoiding the discretization of the fluid domain. Furthermore, unlike collocation methods, the explicit calculation of the Hadamard finite part of the singular integrals is avoided. This leads after discretization by boundary finite elements to a small and symmetrical algebraic system. Typical examples are presented that demonstrate the efficiency of this variational formulation by studying the sound transmission through a baffled plane structure and through a flexible panel backed by a rigid cavity. These include the calculation of the transmission loss factor and the determination of which modes dominate the noise transmission. Good agreement is obtained between numerical results and analytical results found in the literature.     

CAS-BUS: A Test Access Mechanism and a Toolbox Environment for Core-Based System Chip Testing

As System on a Chip (SoC) testing faces new challenges, some new test architectures must be developed. This paper describes a Test Access Mechanism (TAM) named CAS-BUS that solves some of the new problems the test industry has to deal with. This TAM is scalable, flexible and dynamically reconfigurable. The CAS-BUS architecture is compatible with the IEEE P1500 standard proposal in its current state of development, and is controlled by Boundary Scan features.This basic CAS-BUS architecture has been extended with two independent variants. The first extension has been designed in order to manage SoC made up with both wrapped cores and non wrapped cores with Boundray Scan features. The second deals with a test pin expansion method in order to solve the I/O bandwidth problem. The proposed solution is based on a new compression/decompression mechanism which provides significant results in case of non correlated test patterns processing. This solution avoids TAM performance degradation.These test architectures are based on the CAS-BUS TAM and allow trade-offs to optimize both test time and area overhead. A tool-box environment is provided, in order to automatically generate the needed component to build the chosen SoC test architecture.     

Interference characterization in the unlicensed band

We consider performance of a wireless communication receiver in the presence of a field of continuous wave (CW) interferers that are randomly distributed according to a Poisson process in space and frequency domain in the unlicensed band. From our theoretical model, we derive an accurate analytical expression for average bit error rate (BER). Judging from our results for a strong desired signal, when the user density grows up to ten times its value for a given signal to noise ratio (SNR), BER performance falls by 9.09% and 8.51 % for BPSK and DPSK respectively.     

Effect of functional group of ferrocene redox substance on the transport properties of newly designed ion exchange membrane prepared from polymer gel

A different newly designed cationic exchange polymer membrane and anionic exchange polymer membrane were introduced, and also the transport properties of these polymeric membranes were investigated in this study. The transport properties of these polymer membranes in contact with ferrocene redox derivatives were estimated by using electrochemical techniques such as cyclicvoltammetry, chronopotentiometry, and chronoamperometry techniques, respectively. The used ferrocene redox substances, which have different functional groups, were (Ferrocenylmethyl) trimethylamonium iodide, FcMA, Ferrocenedimethanol, FcDM, and Ferrocene carboxylic acid, FcCA. It indicated that the performance of a membrane depended on the content of polymer gel, anionic exchange polymer site (20 wt % and 50 wt %) or cationic polymer exchange site (20 wt % and 50 wt %), and the efficiency of the functional groups of cationic and anionic exchange polymer site as well. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water and salt permeability of reinforcement polymer‐gel composite membrane

The charged mosaic polymer membrane (CMM) without reinforcement and the composite charged mosaic polymer membrane (CCMM) with reinforcement were investigated in terms of salt and water transport (permeability). The composite charged mosaic polymer membrane (CCMM) with reinforcement showed a unique transport behavior such as preferential material transport L_p and ω. Water permeability coefficient, L_p and salt permeability coefficient, ω were estimated by taking account of active layer thickness of composite polymer gel. The L_p and ω values of CCMM with reinforcement were larger than those of CMM without reinforcement. On the other hand, the reflection coefficient of CCMM, σ, showed negative value, which suggested preferential material transport to solvent transport. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A novel energy-efficient encryption algorithm for secure data in WSNs

The Journal of Supercomputing - Wireless sensor networks (WSNs) are typically deployed environments, often very hostile and without assistance. A certain level of security must be provided....     

Hash key-based image encryption using crossover operator and chaos

This paper proposes a color image encryption scheme using one-time keys based on crossover operator, chaos and the Secure Hash Algorithm(SHA-2). The (SHA-2) is employed to generate a 256-bit hash value from both the plain-image and the secret hash keys to make the key stream change in each encryption process. The SHA-2 value is employed to generate three initial values of the chaotic system. The permutation-diffusion process is based on the crossover operator and XOR operator, respectively. Experimental results and security analysis show that the scheme can achieve good encryption result through only one round encryption process, the key space is large enough to resist against common attacks,so the scheme is reliable to be applied in image encryption and secure communication.     

Fuzzy fault tolerant predictive control for a diesel engine air path

This paper proposes a Fuzzy Fault Tolerant Predictive Control (FFTPC) with integral action method for a class of nonlinear systems. The Takagi-Sugeno (T-S) fuzzy approach is introduced as a modelling technique in order to consider the active control methods adapted to linear models. The proposed control strategy is based on a combination between Parallel Distributed Compensation (PDC) control law and Model Predictive Control (MPC) where the T-S fuzzy aspect uses the Unmeasurable Premise Variables (UPV). A T-S fuzzy observer provides an L2 norm estimation of system state vector and faults. The controller and observer gains are obtained by solving Linear Matrix Inequalities (LMIs) derived from the Lyapunov theory. The validity of the proposed Fault Tolerant Control (FTC) strategy is illustrated through an application to a Diesel Engine Air Path (DEAP) system.