Optimize Routing Protocol Overheads in MANETs: Challenges and Solutions: A Review Paper

Wireless Personal Communications - Routing is one of the most challenging task in mobile ad hoc networks. Several works have been proposed to address this challenge. Majority numbers of researchers...     

Dynamic-mechanical properties of polybutadiene rubbers

The dynamic properties of high-cis (98%) and cis-trans (42% cis) polybutadienes, crosslinked with 0.1 to 1.0% of crosslinking agent, have been studied using a torsion pendulum method over the temperature range ?170 to +20°C. For the high-cis rubber plots of damping factor (tan δ) against temperature showed the expected peak in the glass-transition region with an additional peak in the neighbourhood of 0°C attributable to crystallization. The cis-trans rubber showed two damping maxima in the transition region, separated by 30 to 40°C (depending on the degree of crosslinking), suggesting incipient phase separation of the component structures. The rebound resilience of the high-cis rubber at room temperature exceeded that of the cis-trans, reaching 92% at the highest crosslink density. Plots of resilience versus temperature for both rubbers showed a single minimum in the glass transition region.     

Modified particle swarm optimization and fuzzy regularization for pseudo de-convolution of spatially variant blurs

We propose a modified particle swarm optimization (MPSO) based method for Pseudo De-convolution of the ill-posed inverse problem namely, the space-variant image degradation (SVD). In this paper, SVD is simulated by the pseudo convolution of different sub-regions of the image with different known blurring kernels and additive random noise with unknown variance. Two heuristic modifications are proposed in PSO: 1) Initialization of the swarm and 2) Mutation of the global best. Fuzzy logic is applied for the computation of regularization parameter (RP) to cater for the sensitivity of the problem. The computation of RP is crucial due to the additive noise in the SVD image. Thus mathematical morphology (MM) is applied for better extraction of spatial activity from the distorted image. The performance of the proposed method is evaluated with different test images and noise powers. Comparative analysis demonstrates the superiority of proposed restoration, in terms of quantitative measures, over well-known existing and state-of-the-art SVD approaches.     

Adaptive image denoising using cuckoo algorithm

This paper presents a novel denoising approach based on smoothing linear and nonlinear filters combined with an optimization algorithm. The optimization algorithm used was cuckoo search algorithm and is employed to determine the optimal sequence of filters for each kind of noise. Noises that would be eliminated form images using the proposed approach including Gaussian, speckle, and salt and pepper noise. The denoising behaviour of nonlinear filters and wavelet shrinkage threshold methods have also been analysed and compared with the proposed approach. Results show the robustness of the proposed filter when compared with the state-of-the-art methods in terms of peak signal-to-noise ratio and image quality index. Furthermore, a comparative analysis is provided between the said optimization algorithm and the genetic algorithm.     

A formal mapping-based approach for distributed schedule coordination on projects

Construction projects involve a large number of participants with overlapping scope of work. Coordination of their activities is usually an iterative manual task undertaken by a general contractor that is often unaware of the detailed constraints of other participants. Project schedules play a key role in this coordination and form the backbone of almost all current approaches to process coordination. However, no single schedule represents the perspective of all participants involved in a project. Rather, each participant keeps in some manner a schedule for its own activities, resulting in multiple schedules that need to be coordinated. The current literature does not support simultaneous reasoning across multiple distributed, overlapping schedules. This paper introduces constructs to formalize the integration of participants’ overlapping schedules that represent the same project tasks, but use a different set breakdown structures and level of detail. Implementation of these constructs allows linking of the master schedule to the other participants’ schedules thereby representing the perspectives of all project participants. This integrated perspective facilitates initial schedule coordination and allows rapid identification of schedule conflicts in response to any schedule changes.     

Influence of Methanol on Prion Reduction during High Temperature and High Pressure Oleochemical Processes

Prion‐reduction in standard biodiesel processes is caused by acidic and alkaline conditions. In the alternative RepCat biodiesel process, efficient prion‐reduction can be achieved by high‐temperature/pressure. However, a possible increase in thermostability of prions in the presence of methanol during these conditions has not previously been investigated, and is verified in this work. Samples are spiked with prions, treated with methanol, and incubated at 220 °C at 80 bar for 30 min. No traces of protease‐resistant prion protein (as proxy for prions) are detected in tallow or glycerine (as the final by‐product) after treatment. Serial dilutions of spiked prions show at least 6 log₁₀ prion reduction. More importantly, similar effects are detected using milder conditions of 200 °C at 70 bar for 15 min, representing the worst‐case conditions of the process. In conclusion, this study shows that methanol does not increase the thermostability of prions and the RepCat process can efficiently eliminate prions and is therefore safe for the usage of category 1 tallow. Practical Applications: The study further supports the applicability of RepCat process in reducing prion‐contamination in the presence of methanol. Furthermore, the conditions leads to a considerable reduction of prions in glycerine obtained as by‐product.     

Computations of shear driven vortex flow in a cylindrical cavity using a modified k-ε turbulence model

In this paper, a new variant of the k-ε turbulence model (Saqr et al., CFD Letters, 1(2) pp. 87–94) is used to compute the shear driven vortex flow in an open cylindrical cavity. The results are compared with published LDA measurements for such flow configuration. The modified turbulence model demonstrated good agreement with experimental results, which further supports its validity in computing vortex dominated flows.     

Optimized Reliable Hybrid Routing Protocol Based Link Stability for Mobile Wireless Networks

Wireless Personal Communications - During the last two decades, there has been a tremendous growth in the use of MANETs, not only due to the development of the technology but also due to their high...     

Maleated high oleic sunflower oil‐treated cellulose fiber‐based styrene butadiene rubber composites

Surface treatment of cellulose fibers was performed with maleated high oleic sunflower oil (MSOHO). The MSOHO‐treated cellulose fibers and unmodified cellulose fibers were dispersed in styrene butadiene rubber (SBR) using a two roll mill. Vapor grown carbon nanofibers (VGCNF) were also incorporated at only one parts per hundred rubber (phr) in unmodified cellulose fibers/SBR composites. The curing characteristics, mechanical properties, and water absorption of the resulting composites were determined. MSOHO‐treated fibers completed curing at much slower rate and also decreased the cure density of composites, compared to unmodified fibers. In contrast, the combination of VGCNF and unmodified cellulose fibers accelerated the SBR curing process, but reduced the cure density. MSOHO treatment improved the dispersion of the fibers in the SBR, which resulted in improved mechanical properties of composites. The composite incorporating 1 phr VGCNF and 15 phr unmodified cellulose fibers showed the greatest increase in tensile strength as compared with neat SBR. POLYM. COMPOS. 37:1113–1121, 2016. © 2014 Society of Plastics Engineers