Compatibility of the Support System Consisting of Yielding Elements and Shotcrete Lining in Highly Faulted Grounds

The design procedure is made for a mine shaft where permanent underground facilities are interconnected. The highly faulted grounds were identified using empirical and semi-empirical theories. Furthermore, the behavior types are presented. This paper presents excavation and support methods in such ground conditions and the calculations results show that the installation of the yielding elements have an effect on support elements and prevent shotcrete damage during the curing stage. Different numerical analyses carried out showed that, with the yielding elements installed, the total displacements increase but the final axial force reduces, and therefore, the characteristic compressive strength of shotcrete is not exceeded. The calculation results of ground loads and displacements on the designed support system are presented with a 3D numerical geo-mechanical model adopted for highly faulted ground surrounding deeper complex underground structures.     

3-D/2-D registration of CT and MR to X-ray images

A crucial part of image-guided therapy is registration of preoperative and intraoperative images, by which the precise position and orientation of the patient's anatomy is determined in three dimensions. This paper presents a novel approach to register three-dimensional (3-D) computed tomography (CT) or magnetic resonance (MR) images to one or more two-dimensional (2-D) X-ray images. The registration is based solely on the information present in 2-D and 3-D images. It does not require fiducial markers, intraoperative X-ray image segmentation, or timely construction of digitally reconstructed radiographs. The originality of the approach is in using normals to bone surfaces, preoperatively defined in 3-D MR or CT data, and gradients of intraoperative X-ray images at locations defined by the X-ray source and 3-D surface points. The registration is concerned with finding the rigid transformation of a CT or MR volume, which provides the best match between surface normals and back projected gradients, considering their amplitudes and orientations. We have thoroughly validated our registration method by using MR, CT, and X-ray images of a cadaveric lumbar spine phantom for which "gold standard" registration was established by means of fiducial markers, and its accuracy assessed by target registration error. Volumes of interest, containing single vertebrae L1-L5, were registered to different pairs of X-ray images from different starting positions, chosen randomly and uniformly around the "gold standard" position. CT/X-ray (MR/ X-ray) registration, which is fast, was successful in more than 91% (82% except for L1) of trials if started from the "gold standard" translated or rotated for less than 6 mm or 17 degrees (3 mm or 8.6 degrees), respectively. Root-mean-square target registration errors were below 0.5 mm for the CT to X-ray registration and below 1.4 mm for MR to X-ray registration.     

A METHODOLOGY FOR PROVISION OF SUSTAINABLE INFORMATION SYSTEMS SECURITY

Information represents one of the most important factors in the success of any enterprise today. Moreover, confidential information is becoming increasingly integrated into complex info-innovation solutions and is accordingly exposed to novel means of manipulation and theft. The legal requirements concerning information security (IS) policies in organizations are mainly based on reactive approaches that follow the standards applied in this area and are regularly updated every few years. However, a complementary approach that takes into account a fast-changing information/innovation security threats landscape and that is of proactive nature is required. Such an approach is presented in this article by linking the information security field with the field of innovation management.     

Automated visual inspection of imprint quality of pharmaceutical tablets

Visual appearance is an important quality factor of pharmaceutical tablets. Moreover, it plays a key role in identification of tablets, which is needed to prevent mix-ups among various types of tablets. Since identification of tablets is most frequently done by imprints, good imprint quality, a property that makes the imprint readable, is of utmost importance in preventing mix-ups among the tablets. In this paper, we propose a novel method for automated visual inspection of tablets. Besides defect detection, imprint quality inspection is also considered. Performance of the method was evaluated on three different real tablet image databases of imprinted tablets. A “gold standard” was established by manually classifying tablets into a good and a defective class. The receiver operating characteristics (ROC) analysis indicated that the proposed method yields better sensitivity and specificity than the previous defect detection method.     

A protocol for evaluation of similarity measures for rigid registration

The accuracy and robustness of a registration method depend on a number of factors, such as imaging modality, image content and image degrading effects, the class of spatial transformation used for registration, similarity measure, optimization, and numerous implementation details. The complex interdependence of these factors makes the assessment of the influence of a particular factor on registration difficult, although it is often desirable to have some estimate of such influences prior to registration. The similarity measure used to create the cost function is one of the factors that most influences the quality of registration. Traditionally, limited information on the behavior of a similarity measure is obtained either by studying the quality of the final registration or by drawing plots of similarity measure values obtained by translating or rotating one image relative to the "gold standard." In this paper, we present a protocol for a more thorough, optimization-independent, and systematic statistical evaluation of similarity measures. This protocol estimates a similarity measure's capture range, the number, location and extent of local optima, and the accuracy and distinctiveness of the global optimum. To show that the proposed evaluation protocol is viable, we have conducted several experiments with nine similarity measures and real computed tomography and magnetic resonance (MR) images of a spine phantom, MR brain images, and MR and positron emission tomography brain images, for which "gold standard" registrations were available. We have also studied the impact of histogram bin size on the behavior of nine similarity measures. The proposed evaluation protocol is useful for selecting the best similarity measure and corresponding optimization method for a particular application, as well as for studying the influence of sampling, interpolation, histogram bin size, partial image overlap, and image degradation, such as noise, intensity inhomogeneity, and geometrical distortions on the behavior of a similarity measure.     

Twenty-year follow-up study of radiocesium migration in soil

The profile of (137)Cs present in undisturbed soil due to the Chernobyl accident was measured repeatedly for approximately 20 y. The vertical migration of (137)Cs in soil is a very slow process. The mean vertical migration velocity is estimated at approximately 0.1-0.2 cm y(-1). A method based on in situ gamma spectrometry measurements and Monte Carlo computations, aimed at estimating the profile of (137)Cs without performing any soil sampling, is investigated.     

Retrospective correction of MR intensity inhomogeneity byinformation minimization

In this paper, the problem of retrospective correction of intensity inhomogeneity in magnetic resonance (MR) images is addressed. A novel model-based correction method is proposed, based on the assumption that an image corrupted by intensity inhomogeneity contains more information than the corresponding uncorrupted image. The image degradation process is described by a linear model, consisting of a multiplicative and an additive component which are modeled by a combination of smoothly varying basis functions. The degraded image is corrected by the inverse of the image degradation model. The parameters of this model are optimized such that the information of the corrected image is minimized while the global intensity statistic is preserved. The method was quantitatively evaluated and compared to other methods on a number of simulated and real MR images and proved to be effective, reliable, and computationally attractive. The method can be widely applied to different types of MR images because it solely uses the information that is naturally present in an image, without making assumptions on its spatial and intensity distribution. Besides, the method requires no preprocessing, parameter setting, nor user interaction. Consequently, the proposed method may be a valuable tool in MR image analysis.     

Ventilation Design of Enclosed Underground Structures

This paper proposes an alternative approach to the ventilation design of enclosed and half-enclosed underground structures, where more detailed analysis is required. Theoretical basics are represented and an area of application is determined. To show the advantage of such an approach a calculation of movement of exhausted air through an enclosed structure as a function of time has been executed.     

Human robot cooperation with compliance adaptation along the motion trajectory

In this paper we propose a novel approach for intuitive and natural physical human–robot interaction in cooperative tasks. Through initial learning by demonstration, robot behavior naturally evolves into a cooperative task, where the human co-worker is allowed to modify both the spatial course of motion as well as the speed of execution at any stage. The main feature of the proposed adaptation scheme is that the robot adjusts its stiffness in path operational space, defined with a Frenet–Serret frame. Furthermore, the required dynamic capabilities of the robot are obtained by decoupling the robot dynamics in operational space, which is attached to the desired trajectory. Speed-scaled dynamic motion primitives are applied for the underlying task representation. The combination allows a human co-worker in a cooperative task to be less precise in parts of the task that require high precision, as the precision aspect is learned and provided by the robot. The user can also freely change the speed and/or the trajectory by simply applying force to the robot. The proposed scheme was experimentally validated on three illustrative tasks. The first task demonstrates novel two-stage learning by demonstration, where the spatial part of the trajectory is demonstrated independently from the velocity part. The second task shows how parts of the trajectory can be rapidly and significantly changed in one execution. The final experiment shows two Kuka LWR-4 robots in a bi-manual setting cooperating with a human while carrying an object.