Systematic packaging design tools integrating functional and environmental consequences on product life cycle: Case studies on laundry detergent and milk

This study presents systematic packaging design tools integrating functional and environmental consequences on product life cycle. To design packaging for sustainability, the trade-offs between functional and environmental aspects of packaging throughout the product life cycle should be considered. However, it is difficult for packaging designers to understand the overall trade-offs because the extent of the design consequences on the entire life cycle of packaging and its contents is unclear. We developed two tools for packaging design: the Life Cycle Association Matrix (LCAM) and the Function Network Diagram (FND). The following three steps, based on literature reviews and interviews with industrial experts, were applied. Firstly, we listed the product functions and design variables related to the functions as the attributes allocated to the product life cycle. Secondly, the attributes were connected appropriately based on causal relationships. Lastly, we identified the factors to support decision making in the packaging design procedure. As a result, the LCAM depicts the design consequences on the life cycle, and the FND determines the stakeholders affected by the design consequences. Two case studies were demonstrated to analyze the trade-offs by using our tools. In the case studies, a liquid laundry detergent bottle and a milk carton were redesigned. The tools identified the design consequences and stakeholders affected by the redesign of the usability and protective function for the detergent and milk cases, respectively. The results showed the significance of understanding the design consequences on the product life cycle by integrating the functional and environmental aspects.     

1-GHz-spaced 16-channel arrayed-waveguide grating for a wavelength reference standard in DWDM network systems

We fabricated a 1-GHz-spaced 16-channel arrayed-waveguide grating (AWG) by using a new AWG configuration where the path of each arrayed waveguide winds backward and forward across a 4-in diameter wafer without crossing any other waveguides. The ultra-narrow (< 1 GHz) and stable transmission bands of this AWG can be used to construct a wavelength reference standard covering the S, C, and L bands in the dense wavelength-division-multiplexing network systems whose frequency deviation is /spl plusmn/160 MHz.     

Cover Picture: UV‐Light‐Induced Swelling and Visible‐Light‐Induced Shrinking of a TiO2‐Containing Redox Gel (Adv. Mater. 9/2007)

Polyacrylate gels containing Ag⁺ and TiO₂ nanoparticles are shown to swell under UV light and shrink under visible light in water. In work reported by Tetsu Tatsuma and co‐workers on p. 1249, the TiO₂ absorbs UV light and reduces the Ag⁺, whereas the deposited Ag absorbs visible light and dissolves itself. These redox reactions change the interactions between the polymer chains and eventually the volume of the gel, as shown on the cover.     

Real-time measurement of pointing action by using DSP

This paper presents an approach of measuring in real-time the vector of finger that is pointing to an object. DSP is used in the operation processing unit in order to do the real-time processing. The steps include the extraction of flesh-colored regions from an image, the labeling of the flesh-colored regions, and the detection of two characteristic positions on the finger so that the direction that the finger is pointing at will be calculated. The entire process takes about 29 msec, which makes it possible to have the frame rate of 34 fps. With this frame rate, this measurement approach is considered real-time and promising to be merged into other application systems. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Generation of gas bubbles in microflow using micropipette with ultrasound

Ultrasound was applied to a micropipette micromixer to improve dispersion of gas and liquid in a microchannel. Flow visualization using a high-speed camera was performed to examine the effect of ultrasonic irradiation on bubble generation in the microchannel. Basically, nitrogen gas was injected using a (0.5 µm ID) glass micropipette into ethanol flowing in a rectangular (100 µm×200 µm) microchannel on polydimethylsiloxane (PDMS). Gas and liquid flow rates were regulated using mass flow controllers. At aflow condition that is typical of bubbly flow, ultrasound was transmitted into the microchannel using a piezo-electric (PZT) transducer over a range of operating voltages (2 to 200 Vp-p) and frequencies (50 to 60 kHz). Images captured during the action of the PZT transducer indicate that bubble formation is influenced by ultrasound. When subjected to ultrasound above 50 Vp-p and at the resonant frequency of the PZT transducer, bubbles formed that were smaller and closer together, signifying enhanced shearing of the gas at the micropipette tip by the liquid. The observation of gas slugs occurring sooner might be attributed to the coalescence of gas bubbles that became closely spaced.     

An automatic torque ripple compensation system for direct drive motors

A serious problem in motion control is the occurrence of torque ripple. Since a direct drive (DD) motor with a magnet rotor uses a rare-earth magnet, the torque ripple is more serious than that of conventional servomotors. This paper presents an auto-compensation of torque ripple using a software-implemented torque observer. The frequency and amplitude of torque ripple can be obtained in the controller by using the estimated torque from an observer, and the autonomous generation of a compensating current component for a torque ripple is possible. The proposed algorithm has been verified by experiments.     

Lack of carcinogenicity of medium-viscosity liquid paraffin given in the diet to F344 rats

The carcinogenicity of medium-viscosity liquid paraffin was examined in Fischer 344 rats. Groups of 50 males and 50 females were given the material at dietary doses of 0 (control), 2.5 or 5% for 104 wk. Slight increases in food consumption and body weight were observed in both sexes of the 5% group. However, no significant differences between the control and treated groups were noted with regard to clinical signs, mortality and haematology findings. A variety of tumours developed in all groups, including the control group, but all the neoplastic lesions were histologically similar to those known to occur spontaneously in F344 rats, and no statistically significant increase in the incidence of any tumour type was found for either sex in the treated groups. Granulomatous inflammation in the mesenteric lymph nodes, considered to be a reaction to paraffin absorption, was observed with similar incidence and severity in both sexes of the 2.5 and 5% groups. Thus, it is concluded that under the present experimental conditions, the high dose, about 2000-200,000 times higher than the current temporary acceptable daily intake, does not have any carcinogenic potential in F344 rats. Furthermore, granulomatous inflammation observed in mesenteric lymph nodes were not associated with any development of neoplastic lesions.     

Involvement of brain serotonergic function in lidocaine-induced convulsions in mice

Influences of drug-induced manipulations of central serotonergic function on lidocaine- and pentylenetetrazol (PTZ)-induced convulsions were examined in mice. Agents that suppressed serotonergic transmission increased, whereas drugs that facilitated serotonin (5-HT) function decreased the incidence of lidocaine-induced convulsions. These treatments had similar influences on the incidence of PTZ-induced convulsions. Lidocaine (10(-5)-10(-3) M) reduced the stimulation evoked [3H]5-HT release from cortical slices, followed with an increased spontaneous [3H] overflow at higher concentrations. These results may suggest that brain 5-HT neurons are causally involved as inhibitory neurons in lidocaine-induced convulsions as in the case of PTZ-induced convulsions.     

A 6-ns ECL 100 K I/O and 8-ns 3.3-V TTL I/O 4-Mb BiCMOS SRAM

The authors report a 4 M word×1 b/1 M word×4 b BiCMOS SRAM that can be metal mask programmed as either a 6-ns access time for an ECL 100 K I/O interface to an 8-ns access time for a 3.3-V TTL I/O interface. Die size is 18.87 mm×8.77 mm. Memory cell size is 5.8 μm×3.2 μm. In order to achieve such high-speed address access times the following technologies were developed: (1) a BiCMOS level converter that directly connects the ECL signal level to the CMOS level; (2) a high-speed BiCMOS circuit with low threshold voltage nMOSFETs; (3) a design method for determining the optimum number of decoder gate stages and the optimum size of gate transistors; (4) high-speed bipolar sensing circuits used at 3.3-V supply voltage; and (5) 0.55-μm BiCMOS process technology with a triple-well structure