优化喷枪结构提高喷煤比

近百年来通过改善高炉操作，使高炉焦比由１３００ｋｇ／ｔ铁降低至４００ｋｇ／ｔ铁以下。喷吹煤粉进一步降低燃料消耗成为可能。为此目的，原西德蒡森钢铁公司在１号高炉上改变操作条件的同时，通过优化喷枪结构取得了良好的效果。     

在聚合物驱和水驱中窜流与层间渗透率差异对凝胶处理效果的影响

本文对用凝胶封堵高渗层效果做了模拟研究，所选模型是由两个独立的均质层组成，每层渗透率在纵向上均是各向同性。层间水平渗透率比为０．００３３－０．５，两层的垂直／水平渗透率比相同且为０．００１－０．１。先将凝胶注入到高渗透的深层中，再在每层中注入聚合物和水，每层流度不同，注入到各层中的量亦不同，由于改善了注入剖面，从而降低了垂直／水平渗透率比，所以在井筒附近用凝胶封堵高渗层可提高原油采收率。相同条件下     

Experimental study of a novel hybrid constructed wetland for water reuse and its application in Southern China

A new type of hybrid constructed wetland (CW), consisting of both vertical-baffled flow wetland (VBFW) and horizontal subsurface flow wetland (HSFW), has been deployed in Southern China to naturally accelerate the removal of organic matter and nitrogen. The hybrid CW system is characterised by a combination of continuous baffled flow vertical wetland and 'S' pattern horizontal subsurface flow wetland with natural aeration ditches to increase the concentration of dissolved oxygen in the HSFW bed. An internal circulatory system from the HSFW effluent back to the VBFW may optionally be operated to enhance the biological denitrification effect. Cyperus alternifolius is the main macrophyte in the wetland bed. The performance of the hybrid CW was studied with a pilot-scale system and three full-scale systems for municipal sewage treatment in Southern China. The results suggest that this new hybrid CW can achieve removal efficiencies of chemical oxygen demand, suspended solids, ammonia nitrogen, total nitrogen, and total phosphorus of better than 83.6, 95.0, 71.7, 64.5 and 68.1% respectively, with a specific wetland bed area of 0.70-0.93 m(2) PE(-1). The mean effluent concentrations of these parameters would meet the regulatory discharge limits for wastewater treatment systems (GB18918, 2002) and reuse in the context of agricultural irrigation solutions in China.     

Applying ergonomics to systems: some documented "lessons learned"

Based on evidence accumulated during the author's 45 years of professional experience, the author presents 23 important “lessons learned” regarding applying ergonomics to systems. Documented results from reported cases or other evidence are presented to validate each of these practical learning points.     

Measurements of the photocurrent enhancement of reverse-biased silicon photodiodes in the 0.05-1.5-keV photon-energy range

The measured photocurrents from two different p-n-junction silicon photodiodes at 170-? (73-eV) and at 8.34-? (1480-eV) light are presented. One is a standard extreme-UV photodiode fabricated on low resistivity silicon (70-100 Ω cm), and the other is fabricated on high-resistivity silicon (> 2 × 10(4) Ω cm). The photocurrents from the diode on high-resistivity silicon are at least an order of magnitude greater than the photocurrents from the diode on low-resistivity silicon when a reverse bias of 40 V is applied to each. This photocurrent enhancement is 15.4 ± 4 at 8.34 ? and 12.5 ± 2 at 170 ?.     

Load-balanced parallel streamline generation on large scale vector fields

Because of the ever increasing size of output data from scientific simulations, supercomputers are increasingly relied upon to generate visualizations. One use of supercomputers is to generate field lines from large scale flow fields. When generating field lines in parallel, the vector field is generally decomposed into blocks, which are then assigned to processors. Since various regions of the vector field can have different flow complexity, processors will require varying amounts of computation time to trace their particles, causing load imbalance, and thus limiting the performance speedup. To achieve load-balanced streamline generation, we propose a workload-aware partitioning algorithm to decompose the vector field into partitions with near equal workloads. Since actual workloads are unknown beforehand, we propose a workload estimation algorithm to predict the workload in the local vector field. A graph-based representation of the vector field is employed to generate these estimates. Once the workloads have been estimated, our partitioning algorithm is hierarchically applied to distribute the workload to all partitions. We examine the performance of our workload estimation and workload-aware partitioning algorithm in several timings studies, which demonstrates that by employing these methods, better scalability can be achieved with little overhead.     

Balloon focus: a seamless multi-focus+context method for treemaps

The treemap is one of the most popular methods for visualizing hierarchical data. When a treemap contains a large number of items, inspecting or comparing a few selected items in a greater level of detail becomes very challenging. In this paper, we present a seamless multi-focus and context technique, called Balloon Focus, that allows the user to smoothly enlarge multiple treemap items served as the foci, while maintaining a stable treemap layout as the context. Our method has several desirable features. First, this method is quite general and hence can be used with different treemap layout algorithms. Second, as the foci are enlarged, the relative positions among all items are preserved. Third, the foci are placed in a way that the remaining space is evenly distributed back to the non-focus treemap items. When Balloon Focus maximizes the possible zoom factor for the focus items, these features ensure that the treemap will maintain a consistent appearance and avoid any abrupt layout changes. In our algorithm, a DAG (Directed Acyclic Graph) is used to maintain the positional constraints, and an elastic model is employed to govern the placement of the treemap items. We demonstrate a treemap visualization system that integrates data query, manual focus selection, and our novel multi-focus+context technique, Balloon Focus, together. A user study was conducted. Results show that with Balloon Focus, users can better perform the tasks of comparing the values and the distribution of the foci.