Sleep Disorders Reduce Health-Related Quality of Life in Multiple Sclerosis (Nottingham Health Profile Data in Patients with Multiple Sclerosis)

Quality of Life (QoL) is decreased in multiple sclerosis (MS), but studies about the impact of sleep disorders (SD) on health-related quality of Life (HRQoL) are lacking. From our original cohort, a cross-sectional polysomnographic (PSG) study in consecutive MS patients, we retrospectively analysed the previously unpublished data of the Nottingham Health Profile (NHP). Those MS patients suffering from sleep disorders (n = 49) showed significantly lower HRQoL compared to MS patients without sleep disorders (n = 17). Subsequently, we classified the patients into four subgroups: insomnia (n = 17), restless-legs syndrome, periodic limb movement disorder and SD due to leg pain (n = 24), obstructive sleep apnea (n = 8) and patients without sleep disorder (n = 17). OSA and insomnia patients showed significantly higher NHP values and decreased HRQoL not only for the sleep subscale but also for the “energy” and “emotional” area of the NHP. In addition, OSA patients also showed increased NHP values in the “physical abilities” area. Interestingly, we did not find a correlation between the objective PSG parameters and the subjective sleep items of the NHP. However, this study demonstrates that sleep disorders can reduce HRQoL in MS patients and should be considered as an important confounder in all studies investigating HRQoL in MS.     

On the effects of the packet size distribution on the packet loss process

Real-time multimedia applications have to use forward error correction (FEC) anderror concealment techniques to cope with losses in today’s best-effort Internet. The efficiency of these solutions is known however to depend on the correlation between losses in the media stream. In this paper we investigate how the packet size distribution affects the packet loss process, that is, the distribution of the number of lost packets in a block, the related FEC performance and the average loss run length. We present mathematical models for the loss process of the MMPP+M/D/1/K and the MMPP+M/M/1/K queues; we validate the models via simulations, and compare the results to simulation results with an MPEG-4 coded video trace. We conclude that the deterministic packet size distribution (PSD) not only results in lower stationary loss probability than the exponential one, but also gives a less correlated loss process, both at a particular average link load and at a particular stationary loss probability as seen by the media stream.Our results show that for applications that can only measure the packet loss probability, the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior. Our results show that the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior and thus can improve the queuing performance by decreasing the variance of its PSD.     

A comparison between different PMD compensation techniques

We quantify the benefits of using different techniques for compensation of polarization mode dispersion (PMD) in fiber-optic communication systems by means of numerical simulations. This is done both with respect to PMD-induced pulse broadening and in terms of system outage probability for different data formats [nonreturn-to-zero (NRZ) and return-to-zero (RZ)]. Attention is focused on simple and relevant single- and double-stage post-transmission compensators with a few degrees of freedom (DOF). It is generally believed that a PMD compensator with a polarization controller and a variable delay line can only compensate the PMD to the first order. We show, from analytical results, the counterintuitive fact that this scheme can also partially compensate for higher order PMD. We also investigate the benefit of using a polarizer as compensation element where the optical average power can be used as a feedback signal     

Effective modelling of percolation at the landscape scale using data-based approaches

Process-based models have been extensively applied to assess the impact of landuse change on water quantity and quality at landscape scales. However, the routine application of those models suffers from large computational efforts, lack of transparency and the requirement of many input parameters. Data-based models such as Feed-Forward Multilayer Perceptrons (MLP) and Classification and Regression Trees (CART) may be used as effective models, i.e. simple approximations of complex process-based models. These data-based approaches can subsequently be applied for scenario analysis and as a transparent management tool provided climatic boundary conditions and the basic model assumptions of the process-based models do not change dramatically. In this study, we apply MLP, CART and Multiple Linear Regression (LR) to model the spatially distributed and spatially aggregated percolation in soils using weather, groundwater and soil data. The percolation data is obtained via numerical experiments with Hydrus1D. Thus, the complex process-based model is approximated using simpler data-based approaches. The MLP model explains most of the percolation variance in time and space without using any soil information. This reflects the effective dimensionality of the process-based model and suggests that percolation in the study area may be modelled much simpler than using Hydrus1D. The CART model shows that soil properties play a negligible role for percolation under wet climatic conditions. However, they become more important if the conditions turn drier. The LR method does not yield satisfactory predictions for the spatially distributed percolation however the spatially aggregated percolation is well approximated. This may indicate that the soils behave simpler (i.e. more linear) when percolation dynamics are upscaled.     

Gambling in Norway: An obscure activity?

Suggests that it is difficult to get an exact account of gambling behavior in Norway. It appears that gambling behavior in Norway has increased 50% during the observed 5-yr period. Little is known about the prevalence of problematic gambling. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Tensile,creep, and low-cycle fatigue behavior of a cast γ-TiAl-based alloy for gas turbine applications

The influence of chemical composition on the microstructure of the γ-titanium aluminide alloy Ti-48Al-2W-0.5Si (at. pct) and the accompanying tensile, low-cycle fatigue, and creep properties has been evaluated. The study showed that small variations in chemical composition and casting procedures resulted in considerable variations in the microstructure, yielding vastly different mechanical properties. Low contents of aluminum and tungsten led to a coarse-grained lamellar (γ/α ₂) microstructure with high creep resistance. A composition close to the nominal one produced a duplex (γ+γ/α ₂) structure with favorable strength, ductility, and low-cycle fatigue properties. By controlling the solidification and cooling rates at casting, a pseudoduplex (PS-DP) microstructure with a unique combination of high strength and high fatigue and creep resistance can be obtained. These unique properties can be explained by the diffuse boundaries between the relatively small γ grains and the neighboring lamellar colonies, combined with semicoherent interfaces between the γ and α ₂ phases. At tensile and low-cycle fatigue loading, these boundaries act like high-angle boundaries, producing a virtually fine-grained material promoting strength, whereas at creep loading, grain-boundary sliding is hindered in the semicoherent interfaces leading to high creep resistance.     

Optimization of metal-based multilayers for transparent heat mirrors

Multilayer calculations by conventional matrix methods for dielectricum/noble metal/dielectricum systems on glass have been performed. The aim has been to maximize the integrated parameters for solar transmission, T_sol, and transmission of visible light, T_eye We have found that Ag is superior for maximizing the transmittance over the narrow visible wavelength range owing to the low internal absorptance. When solar energy transmission is considered multilayers based on Au are the best choice for metal film thicknesses above 15 nm. For thinner films, Ag is still to be preferred.     

Partial summations of stationary sequences of non-Gaussian random variables

The distribution of the sum of a finite number of identically distributed random variables is in many cases easily determined given that the variables are independent. The moments of any order of the sum can always be expressed by the moments of the single term without computational problems. However, in the case of dependency between the terms even calculation of a few of the first moments of the sum presents serious computational problems.By use of computerized symbol manipulations it is practicable to obtain exact moments of partial sums of stationary sequences of mutually dependent lognormal variables or polynomials of standard Gaussian variables. The dependency structure is induced by specifying the autocorrelation structure of the sequence of standard Gaussian variables. Particularly useful polynomials are the Winterstein approximations that distributionally fit with non-Gaussian variables up to the moments of the fourth order [Winterstein, S. R. Nonlinear vibration models for extremes and fatigue. J. Engng Mech. ASCE 114 (1988) 1772–1790]¹. A method to obtain the Winterstein approximation to a partial sum of a sequence of Winterstein approximations is explained and results are given for different autocorrelation functions of the generic Gaussian sequence.The primary purpose of the investigation is to provide a tool for judging the validity of the central limit theorem argument in specific applicational situations occurring in stochastic mechanics, that is, to judge the speed of convergence of the distribution of a sum (or an integral) of mutually dependent random variables to the Gaussian distribution. The paper is closely related to the work in Ditlevsen et al. [Ditlevsen, O., Mohr, G. & Hoffmeyer, P. Integration of non-Gaussian fields. Prob. Engng Mech 11 (1996) 15–23]².