Selection of optimized features for fusion of palm print and finger knuckle‐based person authentication

The impact of digital technology in biometrics is much more efficient at interpreting data than humans, which results in completely replacement of manual identification procedures in forensic science. Because the single modality‐based biometric frameworks limit performance in terms of accuracy and anti‐spoofing capabilities due to the presence of low quality data, therefore, information fusion of more than one biometric characteristic in pursuit of high recognition results can be beneficial. In this article, we present a multimodal biometric system based on information fusion of palm print and finger knuckle traits, which are least associated to any criminal investigation as evidence yet. The proposed multimodal biometric system might be useful to identify the suspects in case of physical beating or kidnapping and establish supportive scientific evidences, when no fingerprint or face information is present in photographs. The first step in our work is data preprocessing, in which region of interest of palm and finger knuckle images have been extracted. To minimize nonuniform illumination effects, we first normalize the detected circular palm or finger knuckle and then apply line ordinal pattern (LOP)‐based encoding scheme for texture enrichment. The nondecimated quaternion wavelet provides denser feature representation at multiple scales and orientations when extracted over proposed LOP encoding and increases the discrimination power of line and ridge features. To best of our knowledge, this first attempt is a combination of backtracking search algorithm and 2D²LDA has been employed to select the dominant palm and knuckle features for classification. The classifiers output for two modalities are combined at unsupervised rank level fusion rule through Borda count method, which shows an increase in performance in terms of recognition and verification, that is, 100% (correct recognition rate), 0.26% (equal error rate), 3.52 (discriminative index), and 1,262 m (speed).     

Design of an Ultra-Compact and Highly-Sensitive Temperature Sensor Using Photonic Crystal Based Single Micro-Ring Resonator and Cascaded Micro-Ring Resonator

Silicon - In the present report, a photonic crystal based micro-ring resonator (MRR) structure is proposed which is very compact in size and has very fast response and is employed for temperature...     

Cover Feature: Superior Proton-Transfer Catalytic Promiscuity of Cytochrome c in Self-Organized Media (7/2021)

Evolutionarily elderly proteins commonly feature greater catalytic promiscuity. Cytochrome c is among the first set of proteins in evolution to have known prospects in electron transport and peroxidative properties. Here, we report that cyt c is also a proficient proton-transfer catalyst and enhances the Kemp elimination (KE; model reaction to show proton transfer catalytic property) by ∼750-fold on self-organized systems like micelles and vesicles. The self-organized systems mimic the mitochondrial environment in vitro for cyt c. Using an array of biophysical and biochemical mutational assays, both acid–base and redox mechanistic pathways have been explored. The histidine moiety close to hemin group (His18) is mainly responsible for proton abstraction to promote the concerted E2 pathway for KE catalysis when cyt c is in its oxidized form; this has also been confirmed by a H18A mutant of cyt c. However, the redox pathway is predominant under reducing conditions in the presence of dithiothreitol over the pH range 6–7.4. Interestingly, we found almost 750-fold enhanced KE catalysis by cyt c compared to aqueous buffer. Overall, in addition to providing mechanistic insights, the data reveal an unprecedented catalytic property of cyt c that could be of high importance in an evolutionary perspective considering its role in delineating the phylogenic tree and also towards generating programmable designer biocatalysts.     

Texture modeling in carbon-carbon composites based on mesophase precursor matrices

A computational modeling study of texture formation in carbon-carbon composites based on carbon fibers and carbonaceous mesophase precursors is presented. The modeling predictions on texture formation and disclination structures are quantitatively validated with extensive experimental data. The number and type of disclinations displayed by the carbonaceous mesophase matrix is shown to be governed by the elasticity of the mesophase, the carbon fiber-mesophase interfacial energy, the size of the fibers, and positional arrangement of the fibers. The simulations provide new insights on the fundamental principles that govern texturing and disclination nucleation, and on how to control the structure of carbon-carbon composites through fiber concentration, fiber cross-section, and fiber-matrix interaction.     

A class of discontinuous dynamical systems IV. A laboratory air-water system

An air-water experimental system consisting of two inlets and one outlet is constructed and characterised. It reaches the state of sliding mode, or equivalently, two phase slug flow. The linear hydraulic model proposed in the literature is adequate to describe it. Experimental data are used to tune this model. The resistance to the flow of air through the outlet valve during the two phase flow is much larger than that when air alone flows out. At the operating range, the resistance to water flow is not affected by the presence of air.     

Electrostatic capillary collector for in-situ spectroscopic analysis of aerosols

Identification of particulate matter is important in assessing an individual’s exposure to potentially harmful particles, such as aeroallergens, toxins, and emissions from combustion sources, which can contribute to cardio-pulmonary diseases. Efficient collection of aerosols is essential for aerosol exposure studies such as analysis of chemical and biological components. We present the design and evaluation of a capillary collector that collects PM_2.5 onto the outer surface of a capillary for in-situ spectroscopic analysis. The capillary collector uses a needle-to-ring corona generator to charge particles; the electric field between a cylinder and a wire inserted into the bore of a capillary is used to collect the charged particles. Corona and repelling voltages are optimized for maximum collection of ambient PM_2.5 particles and fluorescent polystyrene latex microspheres in the PM_2.5 size range, on the capillary. The capillary collection efficiency of ambient PM_2.5 at 3 slpm operating flow rate and optimal operating voltages is 63%. Fluorescence spectroscopy is used to quantify the collection of polystyrene latex microspheres. The fluorescence-based capillary collection efficiency is in close agreement with the capillary collection efficiency of ambient PM_2.5. The collection and analysis methodology can be used to develop a compact, low-cost sensor for in-situ spectroscopic analysis of aerosols to determine their chemical composition for source apportionment.

Copyright © 2019 American Association for Aerosol Research     

Mutual spectral residual approach for multifocus image fusion

Multifocus image fusion is the process of obtaining a single image from multiple partially focused images such that the newly formed image consists of the well-defined information extracted from each source image. This paper proposes the use of saliency of the source images based on Mutual Spectral Residual. Spectral Residual brings out the unique/salient features of an image in frequency domain. The idea of proposed mutual spectral residual is to emphasize the relative unique features of a source image with respect to the other source images. The relative unique features are utilized to form saliency maps for each source image. These saliency maps can clearly indicate the focused and defocused parts of an image. Based on the saliency maps obtained, the image fusion takes place in spatial domain. Visual inspection and quantitative evaluation of the fused images obtained by the proposed method, using different evaluation metrics, demonstrate its effectiveness over several existing image fusion methods.     

An Improved Multifactor User Authentication Scheme for Wireless Sensor Networks

Wireless Personal Communications - Wireless Sensor Networks (WSNs) are used to collect and transmitted the data in various applications from normal to those which requires significant security...