Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Low power and high speed design issues of CMOS Hamming code generation and error detection circuit at 22 nm and 16 nm channel length of MOS transistor

Microsystem Technologies - This paper represents low power and high speed design issues of Hamming code generation and error detection circuit using complementary metal oxide semiconductor (CMOS)...     

Favorable influence of ssDNA-functionalized SWCNT on the navigation pattern of C. elegans

Microsystem Technologies - Single-Walled Carbon Nanotubes (SWCNTs) are widely used as potential carriers in drug delivery systems. The objective of this work was to observe the effects of pristine,...     

Effect of organic modifiers on dynamic and static nanomechanical properties and crystallinity of intercalated clay–polycaprolactam nanocomposites

Polymer clay nanocomposites (PCN) of Polyamide6 and sodium montmorillonite are prepared using different organic modifiers (12‐aminolauric acid, n‐dodecylamine, and 1,12‐diaminododecane) to study effect of organic modifiers on structure and nanomechanical properties of PCN. Using X‐ray diffraction and differential scanning calorimetry, crystalline nature of PCNs are evaluated. Nanoscale viscoelastic properties of PCNs are evaluated using nanodynamic mechanical analyzer (NanoDMA). Nanoscale elastic modulus and hardness of PCNs are evaluated using nanoindenter. PCNs show enhancement in elastic modulus, storage modulus, loss modulus, and loss factor by maximum amount of 62.88%, 56.38%, 145.74%, and 71.43%, respectively, and decrease in percentage crystallinity by 16.52% compared to pure polymer. This result indicates that organic modifiers have effect on crystallinity and nanomechanical properties of PCN. To evaluate effect of clay loading on nanomechanical properties of PCN, PCN containing 12‐aminolauric acid is synthesized with different weight percent (3, 6, and 9% of weight of polymer) of organically modified montmorillonite (OMMT), which shows that nanomechanical properties of PCN improves with increase in clay loading. Our study reveals that change in crystallinity of polymer in PCN may have role in the enhancement of nanomechanical properties of PCNs in comparison to pristine polymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Femtocell based green power consumption methods for mobile network

This paper presents the analytical models of power consumption in macrocell, microcell, picocell and femtocell based networks. Five case studies are presented in this paper where macrocells, microcells, picocells and femtocells are deployed based on the number of mobile subscribers present in a region, mobile user traffic in that region and the area of the region where cellular coverage has to be provided. A comparative study is performed between the power consumption by the base stations in each of these five cases and that of the only macrocell based network. The simulation results demonstrate that using each of these five strategies the power consumption by the base stations can be minimized than that of only macrocell based network. Based on the power consumption by the base stations in these five schemes, we have categorized the networks into five classes, A, B, C, D and E, each of which contains cells of different types to reduce power consumption to achieve green cellular network.     

Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composite through Neuro-Genetic technique

This paper proposed a Neuro-Genetic technique to optimize the multi-response of wire electro-discharge machining (WEDM) process. The technique was developed through hybridization of a radial basis function network (RBFN) and non-dominated sorting genetic algorithm (NSGA-II). The machining was done on 5 vol% titanium carbide (TiC) reinforced austenitic manganese steel metal matrix composite (MMC). The proposed Neuro-Genetic technique was found to be potential in finding several optimal input machining conditions which can satisfy wide requirements of a process engineer and help in efficient utilization of WEDM in industry.     

An application of PSO technique for harmonic elimination in a PWM inverter

Harmonic elimination problem in PWM inverter is treated as an optimization problem and solved using particle swarm optimization (PSO) technique. The derived equation for computation of total harmonic distortion (THD) of the output voltage of PWM inverter is used as the objective function in the PSO algorithm. The objective function is minimized to contribute the minimum THD in the voltage waveform and the corresponding switching angles are computed. The method is applied to investigate the switching patterns of both unipolar and bipolar case. While minimizing the objective function, the individual selected harmonics like 5th, 7th, 11th and 13th can be controlled within the allowable limits by incorporating the constraints in the PSO algorithm. The results of the unipolar case using five switching angles are compared with that of a recently reported work and it is observed that the proposed method is effective in reducing the voltage THD in a wide range of modulation index. The simulated results are also validated through suitable experiments.     

Differential regulation of redox proteins and chaperones in HbEβ-thalassemia erythrocyte proteome

Purpose: In (hemoglobin, Hb) HbEβ‐thalassemia, HbE (β‐26 Glu→Lys) interacts with β‐thalassemia to produce clinical manifestation of varying severity. This is the first proteomic effort to study changes in protein levels of erythrocytes isolated from HbEβ‐thalassemic patients compared to normal. Experimental design: We have used 2‐DE and MALDI‐MS/MS‐based techniques to investigate the differential proteome profiling of membrane and Hb‐depleted fraction of cytosolic proteins of erythrocytes isolated from the peripheral blood samples of HbEβ‐thalassemia patients and normal volunteers. Results: Our study showed that redox regulators such as peroxiredoxin 2, Cu‐Zn superoxide dismutase and thioredoxin and chaperones such as α‐hemoglobin stabilizing protein and HSP‐70 were upregulated in HbEβ‐thalassemia. We have also observed larger amounts of membrane associated globin chains and indications of disruption of spectrin‐based junctional complex in the membrane skeleton of HbEβ‐thalassemic erythrocytes upon detection of low molecular weight fragments of β‐spectrin and decrease in β‐actin and dematin content. Conclusion and clinical relevance: We have observed interesting changes in the proteomic levels of redox regulators and chaperons in the thalassemic hemolysates and have observed strong correlation or association of the extent of such proteomic changes with HbE levels. This could be important in understanding the role of HbE in disease progression and pathophysiology.     

An adaptive plant leaf mobile informatics using RSSC

Multimedia Tools and Applications - An automated plant biometric system is now an important step in preserving nature’s biodiversity. This paper presents a novel Relative Sub-image Sparse...