Structural Aspects of P2-Type Na0.67Mn0.6Ni0.2Li0.2O2 (MNL) Stabilization by Lithium Defects as a Cathode Material for Sodium-Ion Batteries

A known strategy for improving the properties of layered oxide electrodes in sodium-ion batteries is the partial substitution of transition metals by Li. Herein, the role of Li as a defect and its impact on sodium storage in P2-Na_0.67Mn_0.6Ni_0.2Li_0.2O₂ is discussed. In tandem with electrochemical studies, the electronic and atomic structure are studied using solid-state NMR, operando XRD, and density functional theory (DFT). For the as-synthesized material, Li is located in comparable amounts within the sodium and the transition metal oxide (TMO) layers. Desodiation leads to a redistribution of Li ions within the crystal lattice. During charging, Li ions from the Na layer first migrate to the TMO layer before reversing their course at low Na contents. There is little change in the lattice parameters during charging/discharging, indicating stabilization of the P2 structure. This leads to a solid-solution type storage mechanism (sloping voltage profile) and hence excellent cycle life with a capacity of 110 mAh g^-1 after 100 cycles. In contrast, the Li-free compositions Na_0.67Mn_0.6Ni_0.4O₂ and Na_0.67Mn_0.8Ni_0.2O₂ show phase transitions and a stair-case voltage profile. The capacity is found to originate from mainly Ni³⁺/Ni⁴⁺ and O^2-/O^2-δ redox processes by DFT, although a small contribution from Mn⁴⁺/Mn⁵⁺ to the capacity cannot be excluded.     

Workers’ rest allowance and smoothing of the workload in assembly lines

Ergonomic aspects have a crucial role in manual assembly systems. They impact on the workers’ health, final product quality and productivity. For these reasons, there is the necessity to integrate them into the assembly line balancing phase as, whereas, only time and cost variables are considered. In this study, human energy expenditures are considered as ergonomic aspects and we integrate them, for the first time, into the assembly line balancing problem type 2 through the rest allowance evaluation. We consider as an objective function the minimization of the smoothness index. Firstly, a new optimal method based on mixed integer linear programming and a new linearization methodology are proposed. Then, a heuristic approach is introduced. To complete the study, a computational experimentation is presented to validate the mathematical model and to compare the methodologies proposed in terms of computational time, complexity and solution. Additionally, we provide a detailed analysis of the impact that rest allowance evaluation can have on productivity comparing the results obtained, taking into account the rest allowance integration before, during and after the assembly balancing process.     

On one boundary problem for nonlinear stationary controlled system

The object of study is nonlinear stationary controlled system of ordinary differential equations with constant disturbance in the right part. The problem of constructing the synthesising control function providing the transfer of this system from the initial state to the origin is considered. The sufficiently simple for numerical implementation algorithm of solution of the above-mentioned problem is obtained. It is shown that for local null controllability of the considered system, it is sufficient that the conditions of the Kalman's type were satisfied. In addition, the estimates restricting the choice of initial conditions and external disturbances under which the transfer is guaranteed are obtained. The main idea of the method of construction of the desired control function consists in reducing the original problem to stabilisation of a special kind linear non-stationary system and solving the Cauchy problem for an auxiliary system of ordinary differential equations closed by stabilising control. The simplicity of the realisation of this algorithm is determined by the construction of the auxiliary system and its stabilisation that could be obtained by analytical methods. The effectiveness of the method is illustrated by solving the problem of crane control and its numerical simulation.     

Electronic transport in a type-II GaInAsSb/p-InAs heterojunction with different doping levels of the solid solution

Galvanomagnetic phenomena and photoconductivity in broken-gap type-II GaInAsSb/p-InAs heterojunctions with different levels of doping of the solid solution with donor (Te) or acceptor (Zn) impurities have been investigated. It has been determined that in such structures an electronic channel, which determines the galvanomagnetic effects in a wide range of doping levels, is present at the heterojunction. A sharp decrease of the Hall mobility was observed in the experimental heterostructures with a high level of doping of the epitaxial layer with an acceptor impurity. The observed effect is due to exhaustion of the electronic channel as a result of carrier localization in potential wells at the heterojunction. Fiz. Tekh. Poluprovodn. 31, 897–901 (August 1997)     

Evaluating hyperspectral imaging of wetland vegetation as a tool for detecting estuarine nutrient enrichment

Nutrient enrichment and eutrophication are major concerns in many estuarine and wetland ecosystems, and the need is urgent for fast, efficient, and synoptic ways to detect and monitor nutrients in wetlands and other coastal systems across multiple spatial and temporal scales. We integrated three approaches in a multi-disciplinary evaluation of the potential for using hyperspectral imaging as a tool to assess nutrient enrichment and vegetation responses in tidal wetlands. For hyperspectral imaging to be an effective tool, spectral signatures must vary in ways correlated with water nutrient content either directly, or indirectly via such proxies as vegetation responses to elevated nitrogen. Working in Elkhorn Slough, central California, where intensive farming practices generate considerable runoff of fertilizers and pesticides, we looked first for long- and short-term trends among temporally ephemeral point data for nutrients and other water quality characters collected monthly at 18 water sampling stations since 1988. Second, we assessed responses of the dominant wetland plant, Salicornia virginica (common pickleweed) to two fertilizer regimes in 0.25 m² experimental plots, and measured changes in tissue composition (C, H, N), biomass, and spectral responses at leaf and at canopy scales. Third, we used HyMap hyperspectral imagery (126 bands; 15–19 nm spectral resolution; 2.5 m spatial resolution) for a synoptic assessment of the entire wetland ecosystem of Elkhorn Slough. We mapped monospecific Salicornia patches (～ 56–500 m²) on the ground adjacent to the 18 regular water sampling sites, and then located these patches in the hyperspectral imagery to correlate long-term responses of larger patches to water nutrient regimes. These were used as standards for correlating plant canopy spectral responses with nitrogen variation described by the water sampling program. There were consistent positive relationships between nitrogen levels and plant responses in both the field experiment and the landscape analyses. Two spectral indices, the Photochemical Reflectance Index (PRI) and Derivative Chlorophyll Index (DCI), were correlated significantly with water nutrients. We conclude that hyperspectral imagery can be used to detect nutrient enrichment across three spatial and at least two temporal scales, and suggest that more quantitative information could be extracted with further research and a greater understanding of physiological and physical mechanisms linking water chemistry, plant properties and spectral imaging characteristics.     

Fibrous carbon materials having a protective oxidation resistant coating

Conclusions -- A gas-phase method of depositing one- or multiple-component carbide coatings on CFM of various textile structures has been developed. With preservation of the strength and elastic characteristics of the CFM, the thermo-oxidative resistance of the material is increased, plus the temperature range for the decomposition is shifted into the higher temperature region — by 150–250°C as compared with the starting material.-- CFM with protective coatings are finding ever greater use in making filters for cleaning up high-temperature gas-air mixtures.VNIIPV. Translated from Khimicheskie Volokna, No. 3, pp. 47–48, May–June, 1991.     

Holographic spectrum dividers for the UV spectral range

We have theoretically and experimentally studied the possibility of using nonlinear recording of holographic mirrors for creating a spectrum divider capable of spatially separating wavelengths in the spectral region of 290–330 nm.     

Modification of the surface of polyacrylonitrile fibres before oxidation with a dispersion of technical carbon

Conclusions -- The possibility of using dispersions of technical carbon in a medium of ethylene glycol, an aqueous solution of a binder of the Sokrat-binder type, or an alcoholic solution of polyvinyl butyral for the modification of polyacrylonitrile fibres before thermo-oxidation, which ensure obtaining a stable and uniform carbon-containing film on the fibre surface has been established.-- The use of ethylene glycol as the dispersion medium leads to retention of the strength of fibres after heat treatment at the level of the starting fibres and reduces the specific bulk electrical resistance.-- Application of aqueous solutions of the Sokrat-binder aids in preserving fibre strength during thermo-oxidation. The linear density of the fibre and its ability to be oxidized are increased, but the specific bulk electrical resistance and elongation are reduced.-- The use of alcoholic solutions of polyvinyl butyral makes it possible not only to preserve fibre strength but also to considerably increase it during the thermo-oxidation process. Thereupon, the linear density of the fibres is significantly reduced, and at a dispersion content of 10% by wt. technical carbon, one can obtain electrically-conducting oxidized fibres.Translated from Khimicheskie Volokna, No. 4, pp. 36–37, July–August, 1991.     

CHID1 Is a Novel Prognostic Marker of Non-Small Cell Lung Cancer

There is an urgent need for identification of new prognostic markers and therapeutic targets for non-small cell lung cancer (NSCLC). In this study, we evaluated immune cells markers in 100 NSCLC specimens. Immunohistochemical analysis revealed no prognostic value for the markers studied, except CD163 and CD206. At the same time, macrophage markers iNOS and CHID1 were found to be expressed in tumor cells and associated with prognosis. We showed that high iNOS expression is a marker of favorable prognosis for squamous cell lung carcinoma (SCC), and NSCLC in general. Similarly, high CHID1 expression is a marker of good prognosis in adenocarcinoma and in NSCLC in general. Analysis of prognostic significance of a high CHID1/iNOS expression combination showed favorable prognosis with 20 months overall survival of patients from the low CHID1/iNOS expression group. For the first time, we demonstrated that CHID1 can be expressed by NSCLC cells and its high expression is a marker of good prognosis for adenocarcinoma and NSCLC in general. At the same time, high expression of iNOS in tumor cells is a marker of good prognosis in SCC. When used in combination, CHID1 and iNOS show a very good prognostic capacity for NSCLC. We suggest that in the case of lung cancer, tumor-associated macrophages are likely ineffective as a therapeutic target. At the same time, macrophage markers expressed by tumor cells may be considered as targets for anti-tumor therapy or, as in the case of CHID1, as potential anti-tumor agents.