Textural Transitions in a Rotating Slab of 3He-A

The operation of a torsional oscillator for detection, of flow-driven textural transitions in, ³He-A is described. The detection technique, tracking the shift of the resonant frequency of the torsional oscillator, allows us to observe textural changes and the presence of vortices in zero magnetic field. It relies on. the anisotropic superfluid density of ³He-A and its change due to reorientation of the Î-texture caused by counterflow.     

Articular cartilage volume in the knee: semiautomated determination from three-dimensional reformations of MR images

PURPOSE: To determine the accuracy of semiautomated quantification of articular cartilage volume from three-dimensional (3D) reformations of magnetic resonance (MR) images. MATERIALS AND METHODS: Sagittal, fat-suppressed, 3D, spoiled gradient-recalled-echo MR imaging of two bovine and two human cadaver knees was performed. Articular cartilage volume was calculated from 3D reformations of the MR images by using a semiautomated program written at the authors' institution. Calculated volumes were compared with directly measured volumes of the surgically removed articular cartilage. RESULTS: The percentage of error of the MR imaging-determined volumes was 6.53% +/- 4.75 (mean +/- standard deviation). A strong correlation between the two sets of observations was shown (r=.997). Linear regression showed the calculated volumes to be highly accurate (slope=1.002, P>.25). Repeated reformations yielded volumes that were reproducible (mean absolute error, 0.013 mL +/- 0.019) and not significantly different from the measured volume (P>.10). CONCLUSION: Semiautomated quantification of knee articular cartilage from MR images yields highly accurate cartilage volumes.     

Predicted distribution and ecological risk assessment of a "segregated" hydrofluorrother in the Japanese environment

An assessment of HFE-7500, a 'segregated' hydrofluoroether, was conducted to evaluate the potential for exposure to and subsequent effects on humans and wildlife in Japan. The segregated hydrofluoroethers belong to a class of fluorochemicals currently being proposed as replacements for traditional fluorochemicals (CFCs and PFCs) that are currently being used in several industries, in particular, the semiconductor industry. These traditional compounds have been implicated as ozone-depleting or potent "greenhouse gases". The segregated hydrofluoroethers have useful physical and chemical properties, but do not contribute to ozone depletion and have lower "global warming potential" (GWP) indices. Although the physical properties of these materials (low H2O solubility and high vapor pressure) suggest there would be a very low level of risk to aquatic systems, a thorough analysis had not been previously performed. Predicted environmental concentrations (PECs) of HFE-7500 in Japan were determined with the Higashino model, a Gausian puff and plume model that used an approximation of environmental releases to the atmosphere as input to the model. Allowable concentrations to protect aquatic life, wildlife, and humans from noncancer effects were determined as detailed in USEPA's final Water Quality Guidance for the Great Lakes Systems. Potential risk to ecological receptors and humans was determined by calculating hazard quotients and margins of safety. The results of the risk assessment indicate that HFE-7500 poses no significant risk to either aquatic or terrestrial wildlife species or humans living in the Japanese environment. The least margin of safety for any ecological receptor was 100,000, and a margin of safety greater than 100,000,000 for most receptors indicated that HFE-7500 poses no threat to human health. Because of a scarcity of toxicity and exposure data, the risk assessment was based on very conservative assumptions. Therefore, the actual margins of safety for both humans and wildlife could have been 100- to 1,000-fold greater if additional data were available such that less stringent uncertainty factors could be applied. These results suggest that the environmental impact of HFE-7500 should be inconsequential based on the marked improvement in its atmospheric properties relative to the traditional compounds currently in use. Given the short atmospheric lifetime and low global warming potential of this material, its replacement of CFCs and PFCs would result in a net improvement of environmental health and safety.     

A scalable manufacturing process for flexible active‐matrix e‐paper displays

Abstract— A scalable manufacturing process for fabricating active‐matrix backplanes on low‐cost flexible substrates, a key enabler for electronic‐paper displays, is presented. This process is based on solution processing, ink‐jet printing, and laser patterning. A multilayer architecture is employed to enable high aperture ratio and array performance. These backplanes were combined with E Ink electrophoretic media to create high‐performance displays that have high contrast, are bistable, and can be flexed repeatedly to a radius of curvature of 5 mm.     

Cytotoxicity of bile in human Hep G2 cells and in primary cultures of rat hepatocytes

There has been increasing interest in the development of a hepatocyte bioreactor for the treatment of acute hepatic failure; however, little is known about the effect of hepatocyte byproducts on the viability of the cells in the bioreactor environment. We investigated the effects of increasing concentrations of bile on the growth and viability of the human hepatoma cell line Hep G2 and on the cytochrome P-450 content and dependent mixed function oxidase (MFO) activities, reduced glutathione (GSH) content, and glutathione S-transferase (GST) activity of primary cultures of rat hepatocytes. Our purpose was to determine whether or not it would be necessary to pretreat the plasma from patients with acute liver failure to remove elevated bile concentrations which might be toxic to the hepatocytes in an artificial liver device. Bile was found to inhibit Hep G2 cell growth at concentrations as low as 0.1% and to decrease viability at concentrations above 0.5%. The cytochrome P-450 and GSH contents and the activities of the MFO system and of GST were decreased in the primary cultures of hepatocytes following 24 h treatment with concentrations of bile at and above 0.5%. The MFO activities associated with different cytochrome P-450 isoenzymes decreased to different extents in the presence of bile with the O-dealkylation of pentoxyresorufin being more labile than that of ethoxyresorufin. Our data indicate that elevated bile concentrations are cytotoxic to liver cells, and it may be necessary to pretreat patient plasma to decrease its bile content to protect the cells during the clinical operation of a hepatocyte bioreactor device.     

Effectiveness of customised neutron shielding in the maze of radiotherapy accelerators

An investigation was performed to examine the neutron dose equivalent in a radiotherapy maze lined with a customised neutron shielding material. The accelerator investigated was a Varian Clinac 2100C/D using 18 MV photons, and the neutron shielding utilised at this centre was Premadex commercially available neutron shielding. Based on Monte Carlo simulations, properly installed customised neutron shielding may reduce the neutron dose equivalent by up to a factor of 8 outside the maze, depending upon the installation. In addition, it was determined that the neutron dose near the entrance to the maze may be reduced by approximately 40% by using customised neutron shielding in the maze, as compared with a facility not using this shielding. This would have a positive dose-saving effect in doorless maze designs.     

Design Recommendations for a FRP Bridge Deck Supported on Steel Superstructure

No appropriate provisions from either AASHTO Standard (2002) or AASHTO LRFD (2004) bridge design specifications are available for the design of fiber-reinforced polymer (FRP)-deck-on-steel-superstructure bridges. In this research, a parametric study using the finite-element method (FEM) is conducted to examine two design issues concerning the design of FRP-deck-on-steel-superstructure bridges, namely deck relative deflection and load distribution factor (LDF). Results show that the strip method specified in AASHTO LRFD specification as an approximate method of analysis, can also be applied to FRP decks as a practical method. However, different strip width equations have to be determined by either FEM or experimental methods for different types of FRP decks. In this study, one such equation has been derived for the Strongwell deck. In addition, both FEM results and experimental measurements show that the AASHTO LDF equations for glued laminated timber decks on steel stringers provide good estimations of LDF for FRP-deck-on-steel-superstructure bridges. Finally, it is found that the lever rule can be used as an appropriately conservative design method to predict the LDF of FRP-deck-on-steel-superstructure bridges.     

Performance of Tube and Plate Fiberglass Composite Bridge Deck

A composite bridge deck system assembled from glass∕polyester pultruded components has been developed. This system utilizes square tubes running transverse to the traffic direction, mechanically fastened and bonded together, and flat cover plates bonded to the tubes with an epoxy adhesive and through-anchored to the deck support structure using mechanical connectors. A 4.27 × 1.22 m section of the deck system integrally connected to the superstructure at a 1.2 m girder spacing was tested to failure under a single patch loading. The results indicate a factor of safety of 4 on strength and a deflection-to-span ratio of about L∕300. Another section of the deck was fatigued to 3,000,000 cycles under service loading at a load ratio of R = 0.1 and a nominal frequency of 3 Hz. Results from these tests indicate no loss in stiffness up to 3,000,000 cycles. Following the fatigue testing, this section was also tested to failure; no loss in strength was observed. In addition, a finite-element model of the laboratory tests was developed. The results from the model showed good correlation to deflections and longitudinal strains measured during the tests.