Albert Hoyt Taylor [Scanning the past]

Presents a short biography of A. Hoyt Taylor and discusses his work in the fields of concealed radio receiving systems, radar, radio wave propagation and antennas     

Neutron and X-ray reflectivity studies of human serum albumin adsorption onto functionalized surfaces of self-assembled monolayers

Endurance exercise training increases fat oxidation during large muscle mass exercise. Although the source of this fat has been thought to be plasma free fatty acids (FFA) released from adipose tissue, the training-induced decrease in lipolytic hormonal responses to exercise is not consistent with this concept. The purpose of this communication is to review findings, from our laboratory indicating that, in young healthy subjects, endurance exercise training reduces plasma FFA turnover and oxidation during moderate intensity prolonged 2-leg cycling while simultaneously enhancing depletion of triglycerides from the active musculature. Evidence is presented that metabolism of intramuscular triglycerides can explain the increase in total fat oxidation observed in the trained state during large muscle mass exercise. However, these results may not be applicable to exercise involving small muscle groups, a distinction that is likely to be important in explaining the apparent conflict between our findings and those from other laboratories where experimental conditions were different. In summary, for large muscle mass exercise up to 2 h in duration, plasma FFA are a less important fuel source in the trained state, and intramuscular triglycerides supply the major portion of the increase in oxidized fatty acids.     

Thermally stimulated depolarization current studies on strain-induced relaxations in polymers

Thermally stimulated depolarization current (TSD) method has been used to study the molecular relaxation from room temperature up to the glass-transition temperature for three plastically deformed polymers. A well-defined distinct α′ peak has been observed in the vicinity of 70°C for polycarbonate, polysulfone, as well as poly(ethylene terephthalate), that had been annealed above T_g and subsequently cold-rolled. Since this relaxation is not observed after the initial measurements, it is a nonequilibrium relaxation. In the case of polycarbonate, the nonreversible α′ process had an activation energy ranging from 1.22 to 1.75 eV and an intensity proportional to the degree of deformation resulting from cold-rolling. The spontaneous polarization in the rolled material was believed to originate from the initial anisotropy which was subsequently enhanced by the rolling process. Density measurements, as well as the birefringence observation, have been performed on the rolled specimens. All the studies led to the conclusion that the molecular motion responsible for this α′ peak was the disorientation of local chain segments from their aligned conformation frozen in during the cold-work.     

Synthesis of polycarbonate containing in-chain 4-N,N-dimethylamino-4′-nitrostilbene via ring-opening polymerization

Summary We have successfully synthesized a new NLO chromophore based on 4-N,N-dimethylamino-4-nitrostilbene which contains bisphenol functionality for polycarbonate preparation. Chromophore-4 was used to make macrocyclic carbonate oligomers and the oligomers were converted to polycarbonate via ring-opening polymerization in solution.     

Prototyping of masks, masters, and stamps/molds for soft lithography using an office printer and photographic reduction

This paper describes a practical method for the fabrication of photomasks, masters, and stamps/molds used in soft lithography that minimizes the need for specialized equipment. In this method, CAD files are first printed onto paper using an office printer with resolution of 600 dots/in. Photographic reduction of these printed patterns transfers the images onto 35-mm film or microfiche. These photographic films can be used, after development, as photomasks in 1:1 contact photolithography. With the resulting photoresist masters, it is straightforward to fabricate poly(dimethylsiloxane) (PDMS) stamps/molds for soft lithography. This process can generate microstructures as small as 15 microm; the overall time to go from CAD file to PDMS stamp is 4-24 h. Although access to equipment-spin coater and ultraviolet exposure tool-normally found in the clean room is still required, the cost of the photomask itself is small, and the time required to go from concept to device is short. A comparison between this method and all other methods that generate film-type photomasks has been performed using test patterns of lines, squares, and circles. Three microstructures have also been fabricated to demonstrate the utility of this method in practical applications.     

Studies of epoxy resin systems: Part B: Effect of crosslinking on the physical properties of an epoxy resin

An epoxy system consisting of diglycidyl ether of butanediol, DGEB, cured with 4-4′ diaminodiphenyl sulfone, DDS, has been used for a study of the effect of crosslinking density on the properties of the epoxy resin. Because of the low curing rate at room temperature and the low glass-transition temperature, this system was amenable to a wide range of controlled cross-linking density. The crosslinking density was monitored by FTIR (Fourier transform infrared spectroscopy), which followed the change in concentration of the epoxy groups during the curing reaction. The bulk density was found to increase linearly with the crosslinking density. The modulus, the upper yield point, the lower yield point, and the degree of retraction of a deformed sample all increased with the degree of crosslinking. The thermally stimulated depolarization (TSD) β-peak was found to vary with crosslinking density, but the γ-peak was not changed. The TSD a peak was found to decrease in strength, but increased in temperature as the crosslinking density increased. This observation suggests that TSD measurements arc a good monitor of crosslinking density of epoxy resins, particularly near the final stage of the crosslinking reaction.     

IMPACT OF CHANGING HYDROLOGY ON NUTRIENT UPTAKE IN HIGH ARCTIC RIVERS

Despite the importance of river nutrient retention in regulating downstream water quality and the potential alterations to nutrient fluxes associated with climate‐induced changes in Arctic hydrology, current understanding of nutrient cycling in Arctic river systems is limited. This study adopted an experimental approach to quantify conceptual water source contributions (meltwater, groundwater), environmental conditions and uptake of NO₃^?, NH₄⁺, PO₄^3? and acetate at 12 headwater rivers in Svalbard and so determine the role of changing hydrology on nutrient uptake in these Arctic river systems. Most rivers exhibited low demand for NO₃^? and PO₄^3?, but demand for NH₄⁺ and acetate was more variable and in several rivers comparable with that measured in sub‐Arctic regions. The proportion of meltwater contributing to river flow was not significantly related to nutrient uptake. However, NH₄⁺ uptake was associated positively with algal biomass, water temperature and transient storage area, whereas acetate uptake was associated positively with more stable river channels. Mean demand for NH₄⁺ increased when added with acetate, suggesting NH₄⁺ retention may be facilitated by labile dissolved organic carbon availability in these rivers. Consequently, nutrient export from Arctic river systems could be influenced in future by changes in hydrological and environmental process interactions associated with forecasted climate warming. Copyright © 2013 John Wiley & Sons, Ltd.     

THE RETURN OF ATLANTIC SALMON (SALMO SALAR L.) AND IMPROVED WATER QUALITY IN URBAN RIVERS IN OSLO,NORWAY

Most rivers and streams in the city of Oslo, Norway, rise in the surrounding forests, and all run through industrial and urban areas before they reach the sea. Most of these rivers have a long history of poor water quality in the middle and lower reaches until the early 1980s. This was reflected in low benthic diversity and the absence of fish. However, at the end of the 1970s, considerable efforts were made to limit industrial discharges, pollution episodes, and urban runoff, resulting in a substantial improvement in water quality. This improvement in water quality resulted in major changes in the benthos and fish populations of the rivers, especially the river Akerselva, which runs through the city centre. Here Atlantic salmon (Salmo salar) became extinct in the mid‐1800s and did not return until 1983. Atlantic salmon and sea trout (Salmo trutta) now spawn in the lower reaches, and the river supports juvenile populations of these salmonids. In line with the improvement in water quality, benthic biodiversity has also increased. These improvements have been documented based on long‐term monitoring of benthos and fish. Increased benthic diversity and presence of fish also enabled the authorities to trace the source of several pollution episodes that led to fish kills. The European Union Water Framework Directive will bring further pressure to maintain a stable and good ecological status for the Oslo rivers, although it may be difficult to attain this goal in an urban environment. Copyright © 2013 John Wiley & Sons, Ltd.     

Thevenin's theorem

The equivalent generator theorem is discussed. It is commonly called Thevenin's theorem, in honor of Leon Charles Thevenin, a French telegraph engineer and educator who proposed it in 1883, but in fact Hermann von Helmholtz proposed it first, in an 1853 paper. Although originally introduced to facilitate the analysis of linear networks of resistances and voltage sources, the theorem subsequently was defined in terms of impedances and voltage sources. As a tool for circuit analysis, it is allied to the superposition theorem. The history of the theorem and how it came to be named for Thevenin are described