Impact of adhesive ingredients on adhesion between rubber and brass-plated steel wire in tire

Proficiency on underlying mechanism of rubber-metal adhesion has been increased significantly in the last few decades. Researchers have investigated the effect of various ingredients, such as hexamethoxymethyl melamine, resorcinol, cobalt stearate, and silica, on rubber-metal interface. The role of each ingredient on rubber-metal interfacial adhesion is still a subject of scrutiny. In this article, a typical belt skim compound of truck radial tire is selected and the effect of each adhesive ingredient on adhesion strength is explored. Out of these ingredients, the effect of cobalt stearate is found noteworthy. It has improved adhesion strength by 12% (without aging) and by 11% (humid-aged), respectively, over control compound. For detailed understanding of the effect of cobalt stearate on adhesion, scanning electron microscopy and energy dispersive spectroscopy are utilized to ascertain the rubber coverage and distribution of elements. X-ray photoelectron spectroscopy results helped us to understand the impact of Cu_XS layer depth on rubber-metal adhesion. The depth profile of the Cu_XS layer was found to be one of the dominant factors of rubber-metal adhesion retention. Thus, this study has made an attempt to find the impact of different adhesive ingredients on the formation of Cu_XS layer depth at rubber-metal interface and establish a correlation with adhesion strength simultaneously.     

Analysis of D.C Parameters of Short-Channel Heterostructure Double Gate Junction-Less MOSFET Circuits Considering Quantum Mechanical Effects

Silicon - In this article, the electrical behavior of short channel SiGe Heterostructure Junction-Less DG-MOSFET have been studied by incorporating the quantum mechanical effect and short channel...     

Chemical toughening of epoxies. I. Structural modification of epoxy resins by reaction with hydroxy-terminated poly(butadiene-co-acrylonitrile)

In an attempt to toughen the epoxy resin matrix for fiber-reinforced composite applications, a chemical modification procedure of a commercially available bisphenol-A-based epoxy resin using reactive liquid rubber HTBN [hydroxy-terminated poly(butadiene-co-acrylonitrile)] and TDI (tolylene diisocyanate) is described. The progress of the reaction and the structural changes during modification process are studied using IR spectroscopy, viscosity data, and chemical analysis (epoxy value determination). The studies support the proposition that TDI acts as a coupling agent between the epoxy and HTBN, forming a urethane linkage with the former and an oxazolidone ring with the latter. The chemical reactions that possibly take place during the modification are discussed.     

Multi-focus image fusion using a morphology-based focus measure in a quad-tree structure

Finite depth-of-field poses a problem in light optical imaging systems since the objects present outside the range of depth-of-field appear blurry in the recorded image. Effective depth-of-field of a sensor can be enhanced considerably without compromising the quality of the image by combining multi-focus images of a scene. This paper presents a block-based algorithm for multi-focus image fusion. In general, finding a suitable block-size is a problem in block-based methods. A large block is more likely to contain portions from both focused and defocused regions. This may lead to selection of considerable amount of defocused regions. On the other hand, small blocks do not vary much in relative contrast and hence difficult to choose from. Moreover, small blocks are more affected by mis-registration problems. In this work, we present a block-based algorithm which do not use a fixed block-size and rather makes use of a quad-tree structure to obtain an optimal subdivision of blocks. Though the algorithm starts with blocks, it ultimately identifies sharply focused regions in input images. The algorithm is simple, computationally efficient and gives good results. A new focus-measure called energy of morphologic gradients is introduced and is used in the algorithm. It is comparable with other focus measures viz.energy of gradients, variance, Tenengrad, energy of Laplacian and sum modified Laplacian. The algorithm is robust since it works with any of the above focus measures. It is also robust against pixel mis-registration. Performance of the algorithm has been evaluated by using two different quantitative measures.     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

Analysis of Sub-Threshold Adiabatic Logic Model Using Junctionless MOSFET for Low Power Application

Silicon - In this paper Junctionless Double Gate MOSFET based Efficient Charge Recovery Logic (JL-ECRL) circuits have been driven in sub-threshold regime for the first time in literature to...     

Review of the Regulation of Veterinary Drugs and Residues in South Africa

The food safety risk analysis framework of the FAO/WHO is used in the review of veterinary drug and residue regulation in South Africa to determine possible inefficiencies within this system. Results indicate that a variety of challenges relating to the processes of risk assessment, management, and communication do exist, although these occur within a fragmented system of legislation, functions, and structures. Addressing these challenges therefore requires a change to a more collaborative and integrated system. It is indicated that for such a change, the underlying challenges of inadequate horizontal communication, poor conceptualization, and awareness of functions of the system are required to be dealt with.     

Bone cell–materials interaction on alumina ceramics with different grain sizes

The objective of this work was to study adhesion, proliferation and differentiation of osteoblast cells (OPC1) on alumina ceramic, a bio-inert material. Alumina ceramic with different average grain sizes, 1 μm and 12 μm, respectively, were used in as-prepared condition without any grinding and polishing to understand the influence of grain size on cell–material interactions. Scanning electron microscopy and confocal imaging were used to study attachment, adhesion and differentiation of OPC1 cells. Cells attached, proliferated and differentiated well on both the substrates. Adhesion of cells, as assessed by observing the production of vinculin, was found to be a consistent phenomenon on both the substrates. On day 5 of cell culture, significant cell-attachment was observed and vinculin was detected throughout cytoplasm. MTT assay showed that proliferation of OPC1 cells was consistently higher in the case of 12 μm-alumina. Cells of different morphology, nodular, plate-like as well as elongated, were found to get anchored at grains, grain boundaries as well as pores. On day 16, there were clear signs of mineralization as well. Over all, alumina with average grain size of 12 μm showed better cell-attachment, growth and differentiation compared to 1 μm grain size samples.     

Effect of epoxy functionalized compatibilizer on the mechanical properties of low‐density polyethylene/plasticized tapioca starch blends

A series of low‐density polyethylene (LDPE) blends with varying proportions of plasticized tapioca starch have been used for the study of their mechanical properties. A functionalized epoxy resin, namely, poly(ethylene‐co‐glycidyl methacrylate) has been used as the compatibilizer. The impact and tensile properties have been measured by standard ASTM methods. The mechanical properties are seen to improve significantly with the addition of the epoxy compatibilizer, approaching values close to those of virgin LDPE. The scanning electron micrographs of the compatibilized blends show ductile failure which evidently contribute to improved mechanical properties. © 2001 Society of Chemical Industry