Effect of wafer thinning methods towards fracture strength and topography of silicon die

This paper characterizes die damage resulting from various wafer thinning processes. Die fracture strength is measured using ball breaker test with respect to die surface finish. Further study on surface roughness and topography of each surface finish is obtained by atomic force microscopy (AFM) and scanning electron microscopy (SEM) techniques. Stress relief process with 25 μm removal is able to strengthen 100 μm wafer by 20.4% using chemical wet etch and 75 μm wafer by 36.4% with plasma etch. Relatively, plasma etching shows higher fracture strength and flexibility compared to chemical wet etch. This is due to topography of the finished surface of plasma etch is smoother and rounded, leading to a reduced stress concentration, hence improved fracture strength.     

Superconducting Properties of Ag and Sb Substitution on Low-Density YBa2Cu3O δ Superconductor

The effects of silver (Ag) and antimony (Sb) substitution on low-density YBa₂Cu₃O _δ (YBCO) superconductor were investigated. Two series of sample with a nominal composition of YBa_2?x Ag _x Cu₃O _δ and YBa_2?x Sb _x Cu₃O _δ where x=0.05, 0.10, 0.15, 0.20, 0.30, 0.40 and 0.50 were synthesized and characterized. All Ag-doped samples showed metallic behavior at the normal state and T _C?onset was found at 90 K. T _C?zero decreased as the Ag concentration increased. Optimum Ag concentration was achieved at x=0.20 where T _C?zero has the highest value of 87 K and J _C at 70 K is 16.50 A/cm². For Sb-doped case with x≤0.30, the samples showed metallic behavior above T _C?onset while semiconducting behavior was shown for x≥0.40. The optimum Sb concentration was achieved at x=0.15 where T _C?zero is 85 K and J _C value measured at 70 K is 2.75 A/cm². T _C?onset and T _C?zero were found to decrease toward higher Sb concentration. The crystallographic structure transformed to tetragonal in Sb-doped samples of x≥0.30 while other samples remain orthorhombic.     

Application of MIKE SHE modelling system to set up a detailed water balance computation

Estimation of total water balance is a substantial issue for watershed modelling in order to simulate the major components of the hydrological cycle to determine the stress of different anthropogenic activities on the available water resources within a catchment. In this context, the fully distributed physically based MIKE SHE modelling system was used to simulate the individual hydrological components of the total water balance for the Paya Indah Wetlands (PIW) watershed in the west of Peninsular Malaysia. Results reveal that the overall water balance is predominantly controlled by climate variables. Application of the model to the PIW watershed provides detailed estimation of the total water balance for a first‐order catchment in which actual evapotranspiration (ET) represents approximately 65 and 58%, while overland flow (OL) to the PIW lake system represents 12.38 and 12.3% of the total rainfall during the calibration and validation periods, respectively. The difference of the inflow and outflow was taken as storage in depth. Overall, the model gives a reasonable output of total error of less than 1% of the total rainfall, which in turn indicates that the interaction among components is satisfactorily sustained.     

Graphene‐based ternary composites for supercapacitors

The research on electrode materials for supercapacitor application continues to evolve as the request of high‐energy storage system has increased globally due to the demand for energy consumption. Over the past decades, various types of carbon‐based materials have been employed as electrode materials for high‐performance supercapacitor application. Among them, graphene is 1 of the most widely used carbon‐based materials due to its excellent properties including high surface area and excellent conductivity. To exploit more of its interesting properties, graphene is tailored to produce graphene oxide and reduced graphene oxide to improve the dispersibility in water and easy to be incorporated with other materials to form binary composites or even ternary composites. Nowadays, ternary composites have attracted enormous interest as 2 materials (binary composites) cannot satisfy the requirement of the high‐performance supercapacitor. Thus, many approaches have been employed to fabricate ternary composites by combining 3 different types of electroactive materials for high‐performance supercapacitor application. This review focuses on the supercapacitive performance of graphene‐based ternary composites with different types of active materials, ie, conducting polymers, metal oxide, and other carbon‐based materials.     

Accelerated weathering properties of compatibilized composites made from recycled HDPE and nonmetallic printed circuit board waste

The main aim of this work is to examine the influence of the contents of nonmetallic printed circuit board (PCB) waste component on the photodegradation of recycled high‐density polyethylene (rHDPE) composites. The properties tested were chemical changes, flexural properties, color stability, water absorption, leaching properties, and crystallinity changes of the composites after exposure to 2,000 h of accelerated weathering. Surface degradation for composites with nonmetallic PCB was less compared to unfilled rHDPE mainly because glass fibers covered almost the whole surface of specimens, acting as a protective layer, thus, slowing down the photodegradation reaction. Incorporation of compatibilizer in rHDPE/PCB composites had played an important role in resisting degradation due to UV exposure. All the composite samples became lighter in the early stages of weathering exposure; however, compatibilized composites showed less lightening and reduction on strength and modulus. Carbonyl index increases with exposure time indicating that the oxidation reaction continuously occurred during the aging process. Incorporation of compatibilizer had successfully reduced the water absorption uptake by the composites and effectively delayed some degradation properties of weathering. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43110.     

A Meta-frontier method of decomposing long-term construction productivity components and technological gaps at the firm level: evidence from Malaysia

There is a need for a better approach to measure construction productivity rigorously, multilaterally, longitudinally and decomposed into its components. In response, this paper offers a robust approach to analysing construction productivity at the firm level that has been lacking in the industry to date, by measuring the Total Factor Productivity (TFP) of 37 public-listed Malaysian construction firms over 14 years (2003–2016), based on the Färe-Primont index. In comparing different groups of building, civil and specialist construction firms, this is the first application of a meta-frontier framework to capture the technological gaps involved. Based on the construction firms’ financial data, it is found that TFP improvement generally occurs due to Technical Efficiency (TE) and Scale-Mix Efficiency (SME) (largely scope economies), and significant technological gaps exist among different groups. Moreover, the industry suffered a decline in technologically related production environment over the period – prompting the conclusion that long-term policy engagement should focus on technological improvements. The paper provides a robust approach to analysing construction productivity at the firm level that also can be used for accessing productivity components and technological gaps in construction and other industries.     

Characterization and mechanical properties of exfoliated graphite nanoplatelets reinforced polyethylene terephthalate/polypropylene composites

Recently, graphene and its derivatives have been used to develop polymer composites with improved or multifunctional properties. Exfoliated graphite nanoplatelets (GNP) reinforced composite materials based on blend of polyethylene terephthalate (PET), and polypropylene (PP) compatibilized with styrene–ethylene–butylene–styrene‐g‐maleic anhydride is prepared by melt extrusion followed by injection molding. Characterization of the composites' microstructure and morphology was conducted using field emission scanning electron microscopy, transmission electron microscopy (TEM), X‐ray diffraction analysis (XRD), and Fourier transform infrared spectroscopy (FTIR). Tensile and impact strengths of test specimens were evaluated and the results showed maximum values at 3phr GNP in both the cases. Morphological studies showed that the GNPs were uniformly dispersed within the matrix. Results from XRD analysis showed uniformly dispersed GNPs, which may not have been substantially exfoliated. FTIR spectroscopy did not show any significant change in the peak positions to suggest definitive chemical interaction between GNP and the matrix. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40582.     

Comparison of component method with experimental tests for flush end-plate connections using hot-rolled perwaja steel sections

A component method has been introduced by Steel Construction Institute to predict the moment resistance of partial strength connection. The design philosophy is taken directly from Eurocode 3 with strength checks on bolts, welds, and steel which have been modified to comply with BS 5950-1:2000. The accuracy of the method however needs to be validated with the experimental tests especially for hot-rolled sections other than typical British Section (BS). Six experimental tests on beam-to-column connections have been carried out for Flush End-Plate (FEP) connections consisting of variable parameters such as thickness of end-plate, size and number of bolts, size of columns, and beams. The tests were set-up using local hot-rolled steel sections known as Perwaja Section (PS) for beams and columns instead of typical British Section (BS). The strength of materials for end-plate, column and beam sections were tested for tensile strength and used in predicting the moment resistance for component method. The moment versus rotation of the test results were plotted and compared with the moment resistance derived from component method. The study concluded that the moment resistance of the tested flush end-plate connections was higher than the predicted moment resistance from component method which showed good agreement between the two moments. The study also concluded that the tested FEP connections met the requirements and criteria of partial strength connections.     

Comparative study of the effects of chlorinated polyethylene and acrylic impact modifier on the thermal degradation of poly(vinyl chloride) compounds and poly(vinyl chloride)/(oil palm empty fruit bunch) composites

The effects of chlorinated polyethylene (CPE) and acrylic impact modifier (AIM) on the thermal degradation of poly(vinyl chloride) (PVC) compounds and composites were investigated. The amounts of AIM and CPE used were fixed at 9 parts per hundred parts of resin (phr), while oil palm empty fruit bunch (OPEFB) fiber content was increased from 0 to 40 phr. To produce composites, the PVC formulations were dry‐blended by using a laboratory blender before being milled into sheets on a two‐roll mill at 165°C. The milled sheets were then hot‐pressed at 180°C. The thermal degradation of the specimens was evaluated by using thermogravimetry in a nitrogen environment. Thermal stability of the PVC/CPE compounds and PVC/CPE/OPEFB composites was improved by the addition of CPE. The CPE retarded the dehydrochlorination of PVC. However, the stabilization effect was reduced by the incorporation of OPEFB at levels of 30 and 40 phr. The presence of AIM accelerated the dehydrochlorination of PVC/AIM compounds and PVC/AIM/OPEFB composites. J. VINYL ADDIT. TECHNOL., 2010. © 2010 Society of Plastics Engineers     

Using tchebichef moment for fast and efficient image compression

Orthogonal moment is known as better moment functions compared to the non-orthogonal moment. Among all the orthogonal moments, Tchebichef Moment appear to be the most recent moment functions that still attract the interest among the computer vision researchers. This paper proposes a novel approach based on discrete orthogonal Tchebichef Moment for an efficient image compression. The image compression is useful in many applications especially related to images that are needed to be seen in small devices such as in mobile phone. Meanwhile, the method incorporates simplified mathematical framework techniques using matrices, as well as a block-wise reconstruction technique to eliminate possible occurrences of numerical instabilities at higher moment orders. In addition, a comparison between Tchebichef Moment compression and JPEG compression is conducted. The result shows significant advantages for Tchebichef Moment in terms of its image quality and compression rate. Tchebichef moment provides a more compact support to the image via sub-block reconstruction for compression. Tchebichef Moment Compression is able to perform potentially better for a broader domain on real digital images and graphically generated images.