A New Method for Measuring Scattering of Light from Optical Surfaces with Random Roughness

In this letter we report a new method for measuring light scattered from optically rough surfaces. By collecting scattered light in a given solid angle, the measurement system does not require a detection unit with an extremely large dynamic range. This in turn significantly simplifies the system configuration. Measurements of scattering close to specular reflection (the so-called small angle or near-specular scattering) also can be completed without any difficulty. Unlike in the common angle resolved scattering (ARS) measurement system, in this system a linear movement instead of rotation is adopted to scan scattered light. In this way, the angular resolution of scattering measurements is independent of the resolution of the translation stages and may be adjusted.     

Laser Shock Processing of 6061-T6 Al alloy with 1064 nm and 532 nm wavelengths

Laser Shock Processing (LSP) has been proposed as a competitive alternative technology to classical treatments for improving fatigue and wear resistance of metals. We present a configuration and results in the LSP concept for metal surface treatments in underwater laser irradiation at 532 nm and 1064 nm. The purpose of the work is to compare the effect of both wavelengths on the same material. A convergent lens is used to deliver 1.2 J/pulse (1064 nm) and 0.9 J/pulse (532 nm) in a 8 ns laser FWHM pulse produced by 10 Hz Q-switched Nd:YAG laser with spots of a 1.5 mm in diameter moving forward along the work piece. A LSP configuration with experimental results using a pulse density of 2500 pulses/cm² and 5000 pulses/cm² in 6061-T6 aluminum samples are presented. High level compressive residual stresses are produced using both wavelengths. It has been shown that surface residual stress level is comparable to that achieved by conventional shot peening, but with greater depths. This method can be applied to surface treatment of final metal products.     

The dynamic angle-limited integrated scattering (DALIS) method for measuring scattering of light from optical surfaces with random roughness

A new and simple dynamic angle limited integrated scattering (DALIS) method is developed to examine optically smooth reflective surfaces with defined surface form. Our experimental results from two systems show advantages over conventional angle resolved scattering measurement (ARS) methods. By collecting scattered light in a given solid angle, our methods do not require a detection unit with an extremely large dynamic range. Unlike in the common ARS measurement method, here we use a simple linear translation stage to scan scattered light. The power spectrum density function and the autocorrelation function of the surface roughness can be recovered from the measured scattering pattern. This method can be applied to in-workshop inspection of optical polishing processes.     

High level compressive residual stresses produced in aluminum alloys by laser shock processing

Laser shock processing (LSP) has been proposed as a competitive alternative technology to classical treatments for improving fatigue and wear resistance of metals. We present a configuration and results for metal surface treatments in underwater laser irradiation at 1064 nm. A convergent lens is used to deliver 1.2 J/cm² in a 8 ns laser FWHM pulse produced by 10 Hz Q-switched Nd:YAG, two laser spot diameters were used: 0.8 and 1.5 mm.Results using pulse densities of 2500 pulses/cm² in 6061-T6 aluminum samples and 5000 pulses/cm² in 2024 aluminum samples are presented. High level of compressive residual stresses are produced −1600 MPa for 6061-T6 Al alloy, and −1400 MPa for 2024 Al alloy. It has been shown that surface residual stress level is higher than that achieved by conventional shot peening and with greater depths. This method can be applied to surface treatment of final metal products.     

Effect of an absorbent overlay on the residual stress field induced by laser shock processing on aluminum samples

Laser shock processing (LSP) or laser shock peening is a new technique for strengthening metals. This process induces a compressive residual stress field, which increases fatigue crack initiation life and reduces fatigue crack growth rate. Specimens of 6061-T6 aluminum alloy are used in this investigation. A convergent lens is used to deliver 2.5 J, 8 ns laser pulses by a Q-switch Nd:YAG laser, operating at 10 Hz. The pulses are focused to a diameter of 1.5 mm onto aluminum samples. Density of 2500 pulses/cm² with infrared (1064 nm) radiation was used. The effect of an absorbent overlay on the residual stress field using this LSP setup and this energy level is evaluated. Residual stress distribution as a function of depth is assessed by the hole drilling method. It is observed that the overlay makes the compressive residual stress profile move to the surface. This effect is explained on the basis of the vaporization of the coat layer suppressing thermal effects on the metallic substrate. The effect of coating the specimen surface before LSP treatment may have advantages on improving wear and contact fatigue properties of this aluminum alloy.