激光二极管端面抽运的棒状Yb：YAG激光器

分析了影响激光二极管抽运Yb：YAG激光器调Q效率的参量，推导了激光二极管端面脉冲抽运Yb：YAG晶体的速率方程，解出了双程抽运情况下的净抽运量子产率。利用数值计算方法，模拟了净抽运量子产率与晶体长度，抽运光脉冲宽度等关系，得出晶体长度的优化可以提高Yb：YAG激光器输出效率。计算了词Q Yb：YAG激光器的最大增益、最大储能，分析了放大自发辐射对于Yb：YAG能量存储的影响。同时给出了激光二极管端面抽运调Q Yb：YAG优化设计方法。这些分析和计算为实际器件的研制提供参考。     

Laser output of radial-slab solid-state laser

In this letter, numerical simulation and experimental study of a radial-slab solid-state laser are presented. The laser includes four crossing-slabs pumped by four Xe flashlamps. The numerical simulation of coherent intensity in the near field and the far field indicates that the laser with the structure can improve the quality of output beam compared with incoherent beam combination. The radial-slab solid-state laser is fabricated, and initial experiments are carried out at a pulse repetition of 1 Hz. Nine beams in the near field and one combined beam in the far field are obtained in our initial experiment. The experimental results are consistent with the numerical analysis in the coherent condition. The results show that coherent beam combination is obtained by this laser.     

电光腔倒空与调Q射频波导CO2激光器

报道电光腔倒空与调Q射频波导CO2激光器,获得了电光腔倒空与调Q脉肿激光输出,并用调节电光晶体电压的方法控制腔倒空与调Q脉冲激光峰值功率;调节晶体电压脉冲宽度,可控制腔倒空与调Q激光的脉冲间隔,达到编程输出的目的。理论上分析了电光腔倒空过程。     

电光调QCO2激光器的六温度模型理论与速率方程理论比较分析

分别利用速率方程理论和六温度模型理论对Q开关CO₂激光器动力学过程进行了理论分析比较,实验上测得电光调Q射频波导CO₂激光器脉冲激光建立时间及峰值功率与速率方程理论和六温度模型理论计算结果一致.但速率方程理论计算的激光脉冲宽度较“窄”,并且几乎没有拖尾,而六温度模型理论计算的脉冲激光波形有明显的拖尾,符合实际测量的波形.另外,六温度模型理论可以全面反映激光器工作气体中不同分子能级的能量转移过程,因此六温度模型理论分析更全面 关键词： 2激光器')" href="#">电光调QCO₂激光器 六温度模型理论 速率方程理论     

Compact waveguide CO2 laser excited by a RF power supply

The design and performance of radio frequency (RF) excited partial Z-fold waveguide CO2 laser with two channels are exposed. The length of the partial Z-fold channel is 3×460 mm and that of the single channel is 460 mm. The electrodes for the two channels are common and excited by a same RF source. According to our analysis, this kind of structure can greatly improve the laser offset frequency stability. In the experiments, we studied the variation of laser output power with gas pressure for two different channels.The maximum laser output power is about 23 W for the partial Z-fold channel and about 6 W for the single channel.     

Processing for laser radar range images

Imaging laser radar can give intensity and range images, which provide integrated 3-dimensional (3D)information about objects. However, dropouts and range anomalies exacerbate range images, which makes their background cluttered and target blurred. For background suppression, a new algorithm that combines intensity image and its mean is presented. By using this algorithm to process actual laser radar range images, most background noises are suppressed. According to range anomalies characteristics, multitemplate selection order mean filtering algorithm is presented and used for actual ladar range images where the distance between two targets is 77 m. This algorithm obtains the clear range image in which the interval of two objects is 75 m. The result shows that the processing algorithm is correct and effective.     

Incoherent and coherent master oscillator/power stimulated Brillouin beam combination for amplifier system with scattering mirror

In this paper, we studied incoherent and coherent beam combining for the master oscillator/power amplifier （MOPA） system with stimulated Brillouin scattering （SBS） mirror. Optic field intensity distributions in the near and far field are numerically calculated for the two kinds of system. The results show that good beam quality in the far field could be obtained. It provides a theoretical basis for experimental research in the future.     

双通道电光调Q射频激励波导CO2激光器研究

报道了双通道可调谐电光调Q射频激励波导CO2激光器,其中一通道是光栅选支电调Q的脉冲激光输出,调Q脉冲重复频率1Hz-10kHz可调,,脉冲峰值功率为150W,脉冲宽度为180ns,另一通道是光栅选支连续激光输出,可用压电陶瓷调节激光频率,同时分析了激光外差频率调谐范围,实验上获得最大脉冲激光外差频率调谐范围为150MHz。     

射频激励双通道不等长电极波导CO2激光器的外差频率调制研究

报道了采用不等长电极结构的射频激励双通道波导CO₂激光器,通过调节射频电源功率的方法可以调谐双通道输出激光的外差频率,其调谐率约为0.1 MHz/W。在未采取任何稳频措施时,其短期外差频率稳定性可达10-10。还在理论上分析了射频功率调谐外差频率的原理。     

Compact waveguide CO_2 laser excited by a RF power supply

The design and performance of radio frequency (RF) excited partial Z-fold waveguide CO_2 laser with two channels are exposed. The length of the partial Z-fold channel is 3×460 mm and that of the single channel is 460 mm. The electrodes for the two channels are common and excited by a same RF source. According to our analysis, this kind of structure can greatly improve the laser offset frequency stability. In the experiments, we studied the variation of laser output power with gas pressure for two different channels. The maximum laser output power is about 23 W for the partial Z-fold channel and about 6 W for the single channel.