基于光信号偏振度的偏振模色散补偿系统的研究

偏振模色散已成为当前发展高速长距离光纤传输系统的主要限制因素。理论上分析了光纤一阶偏振膜色散效应对高速伪随机非归零码／归零码光信号偏振度的影响，并利用数值模拟的方法分析了信号不同输入偏振态以及高阶偏振膜色散效应对非归零码光信号偏振度的影响。最后对利用信号偏振度作为反馈控制信号的自适应偏振膜色散补偿系统的补偿性能进行了分析，大量统计分析结果表明对于10Gbit／s的非归零码光纤传输系统，当传输线路的平均偏振膜色散值小于43ps时，利用极大化输出信号偏振度的偏振膜色散补偿系统对信号眼图的补偿概率可以达到99．99％．     

基于误差补偿的分布式喇曼温度传感器(英文)

基于分布式喇曼传感器,对斯托克斯光和反斯托克斯光两路信号的同步问题进行了合理假设,并给出相应的补偿方法.为了进一步提高解调温度的准确度,采用温度解调系统及温度解调软件对实验系统收集到的数据进行分析.给出了实际开发分布式喇曼传感系统中补偿后离散式的温度解调算法,对该算法解调出来的温度进行实验测试.结果表明:解调温度的误差和监测点到光纤光注射端的距离及相应监测点待解调的温度值均有线性关系.该温度传感器空间分辨率达1m,对于整个2km的探测光纤,即使考虑到温控箱拥有0.5℃左右温度误差,整个实验系统的温度解调误差也在1℃左右.     

Using bidirectional modulation of 2-Ch phase modulator as basis for nonlinear distortion compensation in analog photonic links

We propose a third-order intermodulation distortion （IMD3） compensation scheme based on the bidirec- tional modulation of 2-Ch phase modulator （PM）. We realize the destructive combination of IMD3 by using different modulation efficiencies and appropriately adjusting the input optical power ratio to satisfy a fixed relationship with modulation efficiency. The primary advantage of this scheme is that out-of-phase IMD3 is introduced using only one 2-Ch PM, thereby resulting in the cancellation of IMD3. Up to 27-dB suppression in IMD3 is experimentally demonstrated--a feature that will be useful in low-distortion analog or）tical transrni~sirm.     

Design procedure for photonic crystal fibers with ultra-flattened chromatic dispersion

A simple design procedure is used to generate photonic crystal fibers (PCFs) with ultra-flattened chromatic dispersion. Only four parameters are required, which not only considerably saves the computing time, but also distinctly reduces the air-hole quantity. The influence of the air-hole diameters of each ring of hexagonal PCFs (H-PCF, including 1-hole-missing and 7-hole-missing H-PCFs), circular PCFs (C-PCF), square PCFs (S-PCF), and octagonal PCFs (O-PCF) is investigated through simulations. Results show that regardless of the cross section structures of the PCFs, the 1st ring air-hole diameter has the greatest influence on the dispersion curve followed by that of the 2nd ring. The 3rd ring diameter only affects the dispersion curve within longer wavelengths, whereas the 4th and 5th rings have almost no influence on the dispersion curve. The hole-to-hole pitch between rings changes the dispersion curve as a whole. Based on the simulation results, a procedure is proposed to design PCFs with ultra-flattened dispersion. Through the adjustment of air-hole diameters of the inner three rings and hole-to-hole pitch, a flattened dispersion of 0±0.5 ps/(nm·km) within a wavelength range of 1.239 – 2.083 μm for 5-ring 1-hole-missing H-PCF, 1.248 – 1.992 μm for 5-ring C-PCF, 1.237 – 2.21 μm for 5-ring S-PCF, 1.149 – 1.926 μm for 5-ring O-PCF, and 1.294 – 1.663 μm for 7-hole-missing H-PCF is achieved.     

Photonic angle-of-arrival and time-difference-of-arrival measurement based on dual drive 1 × 2 MZM

We propose and experimentally demonstrate a photonic approach to estimate the time-difference-of-arrival (TDOA) and the angle-of-arrival (AOA) of a microwave signal. TDOA and AOA are estimated from the carrier power difference of the two outputs of the Mach-Zehnder modulator (MZM) using only one dualdrive 1 × 2 MZM. Experimentally, the TDOA of a microwave signal at 3 GHz from 27.78 to 166.67 ps is measured with maximum measurement errors of ± 2.24 ps; correspondingly, the AOA from 60°to 85.2°is measured with maximum measurement errors of ± 0.4° .     

基于重构等效啁啾制作光纤光栅编解码器的光码分多址系统实现

在光码分多址(OCDMA)系统中，光纤布拉格光栅(FBG)编解码器是极具竞争力的核心器件，满足光接入网低成本、高性能的要求. 将重构等效啁啾 (REC) 技术制作的FBG作为编解码器运用于OCDMA系统. 实验采用一对511个码片、编码速率为6.4×10⁹/s的FBG编解码器，在编码匹配的情况下能恢复出输入信号，与编码非匹配的情况相比获得了8 dB的功率增益.这为REC技术制作的编解码光栅在OCDMA系统中的应用提供了实验依据. 关键词： 光纤布拉格光栅 光码分多址 重构等效啁啾 编解码器