排序方式: 共有6条查询结果,搜索用时 15 毫秒
1
1.
双端输出光纤激光振荡器可以通过一个单谐振腔结构实现两路激光输出,能够减少高功率光纤激光系统的体积和成本,在工业领域有着很好的应用前景。基于双端泵浦谐振腔结构,采用稳波长981 nm光纤耦合半导体激光器(LD)泵浦纤芯/包层直径为30/400μm的双包层掺镱光纤,首次实现了总功率大于8 kW的双端输出光纤激光振荡器。在总最高泵浦功率为10.951 kW时,A端输出功率为3769 W, B端输出功率为4400 W,总功率为8169 W,激光器光-光转换效率74.6%,A、B端激光光束质量M2因子分别约2.13和2.36。在最高输出功率时,两端输出激光中均未观察到动态模式不稳定效应(TMI)和受激拉曼散射(SRS),通过进一步增加泵浦功率,有望实现更高功率的激光输出。 相似文献
2.
A high power linearly polarized tunable Raman random fiber laser(RFL) was studied theoretically and experimentally. The parameters required for the system design were obtained through numerical simulation, based on which a hundred-watt-level linearly polarized tunable RFL was successfully demonstrated. The central wavelength can be continuously tuned from 1113.76 to 1137.44 nm, and the output power exceeds 100 W for all of the lasing wavelengths with the polarization extinction ratio(PER) exceeding 20 d B at the maximum output power.Besides, the linewidth, spectral evolution, and temporal dynamics of a specified wavelength(1124.72 nm) were investigated in detail. Moreover, the theoretical results and the experimental results fit well. To the best of our knowledge, this is the first time for a hundred-watt-level linearly polarized tunable RFL ever reported. 相似文献
3.
In this study, we demonstrate an all-fiber high-power linearly-polarized tunable Raman fiber laser system. An inhouse high-power tunable fiber laser was employed as the pump source. A fiber loop mirror(FLM) serving as a high reflectivity mirror and a flat-cut endface serving as an output coupler were adopted to provide broadband feedback. A piece of 59-m commercial passive fiber was used as the Raman gain medium. The Raman laser had a 27.6 nm tuning range from1112 nm to 1139.6 nm and a maximum output power of 125.3 W, which corresponds to a conversion efficiency of 79.4%.The polarization extinction ratio(PER) at all operational wavelengths was measured to be over 21 d B. To the best of our knowledge, this is the first report on a hundred-watt level linearly-polarized tunable Raman fiber laser. 相似文献
4.
半导体激光(LD)泵浦的高功率光纤激光器具有效率高、体积小、重量轻、稳定性好等优点,在工业加工等诸多领域都有着广泛的应用。为了提高泵浦光吸收率,传统光纤激光器常用915 nm和976 nm波段的LD作为激光的泵浦源。在该类LD泵浦的光纤激光器中,由于量子亏损和泵浦吸收系数相对较高,光纤激光器的热致模式不稳定(TMI)阈值相对较低。为了提高量子效率和潜在的TMI阈值,提出采用大于1 010 nm波段的LD直接泵浦光纤激光器,产生高量子效率激光。搭建了振荡放大一体化的全光纤激光器,采用总泵浦功率为2.56 kW的1 010 nm波段LD泵浦,首次获得输出功率2.05 kW、光束质量M2约1.7的激光。后续将通过进一步增大泵浦功率、优化光纤特性以实现更高功率、更优光束质量的光纤激光输出。 相似文献
5.
6.
1