CPLD技术及其在现代时统中的应用

对CPLD(复杂可编程逻辑器件)技术的基本特征和发展趋势作了简要介绍,揭示了该技术在现代数字系统中的重要地位及作用.利用CPLD对时统设备IRIG-B码产生器进行集成,其实验结果表明,集成了的B码产生器不但简单、可靠,而且便于调试,克服了以往硬件电路复杂的缺点.     

CCD联合平差方法及其初步实例检验

在常规照相天体测量工作中 ,对暗天体的定位是采用逐级定标星过渡的方法实现的。由于星表系统差和局部差的存在 ,最终定位结果可能包含难以把握的误差积累。在CCD小视场观测情况下时常难以找到足够数量的定标星。鉴于此 ,推导了CCD观测联合平差方法的严格矢量表达式 ,以期通过共同星的过渡 ,实现大天区统一平差。原理上此方法可实现相对于河外天体的定位 ,以削弱星表系统差和局部差对定位结果的影响。讨论了CCD联合平差方法实现中的问题 ,包括底片常数模型选择、切点位置改正、共同星的较差改正和法方程解算方法等 ,并分析了具体的处理措施。用实例初步检验了CCD联合平差方法的效果 ,表明通过对多张CCD观测的联合平差 ,可以削弱单张CCD观测参考星数目过少、单张CCD观测参考星分布不均、个别参考星存在位置偏差和局部区域参考星存在系统性位置偏差等不利因素对归算结果的影响 ,进而达到扩大视场和提高归算精度的目的     

LAMOST/GALAXY计划:利用LAMOST研究银河系

本文讨论了利用LAMOST作银河系研究的科学意义及可能性；并提出具体实施LAMOST/GAIAXY计划的初步方案。     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.     

Preliminary results for a semi-automated quantification of site effects using geomorphometry and ASTER satellite data for Mozambique,Pakistan and Turkey

Estimation of the degree of local seismic wave amplification (site effects) requires precise information about the local site conditions. In many regions of the world, local geologic information is either sparse or is not readily available. Because of this, seismic hazard maps for countries such as Mozambique, Pakistan and Turkey are developed without consideration of site factors and, therefore, do not provide a complete assessment of future hazards. Where local geologic information is available, details on the traditional maps often lack the precision (better than 1:10,000 scale) or the level of information required for modern seismic microzonation requirements. We use high-resolution (1:50,000) satellite imagery and newly developed image analysis methods to begin addressing this problem. Our imagery, consisting of optical data and digital elevation models (DEMs), is recorded from the ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer) sensor system. We apply a semi-automated, object-oriented, multi-resolution feature segmentation method to identify and extract local terrain features. Then we classify the terrain types into mountain, piedmont and basin units using geomorphometry (topographic slope) as our parameter. Next, on the basis of the site classification schemes from the Wills and Silva (1998) study and the Wills et al (2000) and Wills and Clahan (2006) maps of California, we assign the local terrain units with V _s 30 (the average seismic shear-wave velocity through the upper 30m of the subsurface) ranges for selected regions in Mozambique, Pakistan and Turkey. We find that the applicability of our site class assignments in each region is a good first-approximation for quantifying local site conditions and that additional work, such as the verification of the terrain’s compositional rigidity, is needed.     

Isotopic studies of leaf water. Part 1: A physically based two-dimensional model for pine needles

Understanding of isotopic variations in leaf water is important for reconstruction of paleoclimate and assessment of global biochemical processes. We report here a study of isotopic distributions within a single needle of two pine species, Pinus resinosa Ait and Pinus strobes L., with the objective of understanding how isotopic compositions of leaf water are controlled by environmental and physiological variables. A 2D model was developed to simulate along-leaf isotopic variations and bulk leaf water isotopic compositions. In addition to variables common to all leaf water isotopic models, this 2D model also takes into account the specific geometry and dimensions of pine needles and the isotopic transport in xylem and mesophyll. The model can successfully simulate oxygen isotopic variations along a single needle and averaged over a leaf (bulk leaf water). The simulations suggest that isotopic composition of the bulk leaf water does not always depend only upon the average transpiration rate, which in turn raises questions about using leaf water isotopic values to estimate transpiration rates. An unsuccessful attempt to simulate along-needle hydrogen isotopic variations suggests that certain unknown biological process(es) may not have been incorporated into our 2D model, and if so, it calls for a reevaluation of all other models for hydrogen isotopic simulations of leaf water since they too lack these processes.Existing leaf water isotopic models are reviewed in this work. In particular, we evaluate the most frequently used model, the stomatal boundary layer model (also referred to as the Craig-Gordon model). We point out that discrepancy between the boundary layer model and the measured bulk leaf water seems to depend upon relative humidity. Using our 2D model, we show that this humidity dependency is a result of an interplay between environmental and physiological conditions: if the transpiration rate of plant leaves decreases with increasing relative humidity, our 2D model can reproduce the pattern of isotopic discrepancy between boundary layer model predictions and observations, enabling us to understand better the reason behind this discrepancy.     

加强技术创新服务地质调查——庆祝探矿工艺研究所成立30周年

为加强地质探矿技术力量,改变地质装备落后现状,经国务院批准,1978年8月8日成立了探矿工艺研究所。30年来,经过新老两代工艺所人的艰苦奋斗、刻苦钻研、勇于创新,在科研攻关、成果转化、基地建设和管理等方面都取得了可喜的成绩,为国家的地质科学事业做出了贡献,目前已成为一个“以勘查技术为基础,以承担地质调查任务和科研项目、提供勘查与监测技术方法和技术服务为手段,以服务国家经济建设、社会发展和地质工作为目标,以探矿工艺技术和地质灾害监测防治技术研发为主业”的地质调查科研机构。回顾了工艺所艰苦创业、改革进取的发展历程,对科技体制改革、专业结构调整、人事分配制度改革、地质调查和科研工作进行了总结,展示了丰硕的科研成果和强劲的科技实力;指出了工艺所在“十一五”期间地质调查和科研工作的重点领域和优先发展方向。     

河流集合预报方法(ESP)在水资源中长期预测中的应用研究

中长期径流预测是水文水资源研究领域中的一项重要内容,为水资源规划管理及可持续利用、防汛抗旱、水库调度与发电计划制作、工农业用水计划编制等提供科学依据,对国民经济发展具有十分重要的意义.但由于大气圈极其复杂,水文要素并非仅是气象强迫输入的函数.它还受流域基本特性,前期来水以及人类活动等诸多因素的影响,中长期径流预测在其计算中存在着多种不确定性.因此,中长期径流预测一直是水文预测研究中难度较大的课题之一.本文引入河流集合预报方法(ESP),以丹江口水库为应用实例,利用水文气象历史资料和新安江水文模型,预测分析水库2007年10月份每旬的平均入库流量及概率分布统计,并经与实测流量过程对比分析,满足水库运行调度需求,为水库发电计划制作提供了可靠依据.     

紫外线照射剂量对九孔鲍胚胎及幼虫的影响

采用不同的紫外线照射剂量的海水诱导九孔鲍产卵,观察其对卵子的受精率、畸形率和孵化率的影响.紫外线照射剂量的配制方法是:用紫外线照射过的最大剂量的海水与新鲜海水混合配制出各种剂量的海水.实验把雌亲鲍分成7组,每组20只,分别用紫外线照射剂量为0(对照组)、450、600、750、900、1 050和1 200mW.h/dm3的海水进行刺激产卵.试验重复3次.结果表明,紫外线照射剂量在1 200mW.h/dm3以内,对卵子的受精率影响不大;紫外线照射剂量在750mW.h/dm3以内,对卵子的畸形率影响不大,但在900~1 200mW.h/dm3,对卵子的畸形率影响很大;紫外线照射剂量在600mW.h/dm3以内,对卵子的孵化率没有什么影响,但在750~1 200mW.h/dm3,对卵子的孵化率影响很大.综合考虑卵子的受精率、畸形率和孵化率,九孔鲍催产的适宜的紫外线照射剂量应为450~750mW.h/dm3.