GPS monitoring of vertical ground motion in northern Ardenne–Eifel: five campaigns (1999–2003) of the HARD project

We present the HARD project of GPS monitoring of vertical ground motion in NE Ardenne and Eifel (western Europe). Its main purposes are to get a better insight into the present-day rates of vertical ground motion in intraplate settings and to identify the various causes of these motions. Since 1999, we have carried out yearly campaigns of simultaneous GPS measurements at 12 sites situated so as to sample the different tectonic subunits of the study area and especially to record potential displacements across the seismogenic Hockai fault zone. Five campaigns (1999–2003) have been processed currently. Key issues of the data processing with the Gamit software are discussed and first results are presented. Though temporally consistent in many cases, the obtained vertical motion rates are spatially highly variable. They are also much too high (several mm/year) to support a tectonic interpretation, and a long-term influence of groundwater level variations is proposed to account for the observed motions. This influence should be distinguished from seasonal variations and from inter-survey variations linked to the varying degree of soil and subsoil drying off during the successive spring surveys.     

Ramgarh,Rajasthan, India: A 10 km diameter complex impact structure

The Ramgarh structure is a morphological landmark in southeastern Rajasthan, India. Its 200 m high and 3.5–4 km wide annular collar has provoked many hypotheses regarding its origin, including impact. Here, we document planar deformation features, planar fractures, and feather features in quartz grains of the central part of the Ramgarh structure, which confirm its impact origin. The annular collar does not mark the crater rim but represents the outer part of a central uplift of an approximately 10 km diameter complex impact structure. The apparent crater rim is exposed as a low‐angle normal fault and can be traced as lineaments in remote sensing imagery. The central uplift shows a stratigraphic uplift of ~1000 m and is rectangular in shape. It is dissected by numerous faults that are co‐genetic with the formation of the central uplift. The central uplift has a bilateral symmetry along an SW‐NE axis, where a large strike‐slip fault documents a strong horizontal shear component. This direction corresponds to the assumed impact trajectory from the SW toward the NE. The uprange sector is characterized by concentric reverse faults, whereas radial faults dominate downrange. Sandstones of the central uplift are infiltrated by Fe‐oxides and suggest an impact‐induced hydrothermal mineralization overprint. The impact may have occurred into a shallow water environment as indicated by soft‐sediment deformation features, observed near the apparent crater rim, and the deposition of a diamictite layer above them. Gastropods embedded in the diamictite have Middle Jurassic age and may indicate the time of the impact.     

Geological and geophysical studies of the Agoudal impact structure (Central High Atlas,Morocco): New evidence for crater size and age

Since the discovery of shatter cones (SCs) near the village of Agoudal (Morocco, Central High Atlas Mountains) in 2013, the absence of one or several associated circular structures led to speculation about the age of the impact event, the number, and the size of the impact crater or craters. Additional constraints on the crater size, age, and erosion rates are obtained here from geological, structural, and geophysical mapping and from cosmogenic nuclide data. Our geological maps of the Agoudal impact site at the scales of 1:30,000 (6 km²) and 1:15,000 (2.25 km²) include all known occurrences of SCs in target rocks, breccias, and vertical to overturned strata. Considering that strata surrounding the impact site are subhorizontal, we argue that disturbed strata are related to the impact event. Three types of breccias have been observed. Two of them (br1‐2 and br2) could be produced by erosion–sedimentation–consolidation processes, with no evidence for impact breccias, while breccia (br1) might be impact related. The most probable center of the structure is estimated at 31°59′13.73?N, 5°30′55.14?W using the concentric deviation method applied to the orientation of strata over the disturbed area. Despite the absence of a morphological expression, the ground magnetic and electromagnetic surveys reveal anomalies spatially associated with disturbed strata and SC occurrences. The geophysical data, the structural observations, and the area of occurrence of SCs in target rocks are all consistent with an original size of 1.4–4.2 km in diameter. Cosmogenic nuclide data (³⁶Cl) constrain the local erosion rates between 220 ± 22 m Ma^?1 and 430 ± 43 m Ma^?1. These erosion rates may remove the topographic expression of such a crater and its ejecta in a time period of about 0.3–1.9 Ma. This age is older than the Agoudal iron meteorite age (105 ± 40 kyr). This new age constraint excludes the possibility of a genetic relationship between the Agoudal iron meteorite fall and the formation of the Agoudal impact site. A chronolgy chart including the Atlas orogeny, the alternation of sedimentation and erosion periods, and the meteoritic impacts is presented based on all obtained and combined data.     

Anwendung der Endochronentheorie auf Salzgestein

ZusammenfassungAnwendung der Endochronentheorie auf Salzgestein Es wird ein Stoffgesetz auf Grundlage der Endochronentheorie entwickelt, mit dem das Materialverhalten von Salzgestein beschrieben werden kann. Dafür werden die grundlegenden Vorstellungen dieser allgemeinen Theorie vorgestellt, wie sie von Valanis für Metalle und von Bazant-Bhat für Beton entwickelt wurde.Das Verformungsverhalten von Salzgestein, das durch eine ausgeprägte Kriechneigung geprägt ist, wird erläutert und durch ein rheologisches Modell beschrieben. Das rheologische Modell dient zur Bestimmung der in der Endochronenformulierung vorhandenen Materialfunktionen und Materialkonstanten. Das Stoffgesetz wird in tensorieller Weise formuliert, und es werden Hinweise für seinen Einbau in numerische Rechenmodelle gegeben.

---

SummaryUse of the Endochronic Theory on Rock Salt On the basis of the endochronic theory a material model which can describe the behavior of rock salt is developed. This study presents and follows in a modified form the earlier work of Valanis in metals and Bazant-Bhat in concrete.The deformation characteristics of rock salt, subject to extensive creep, are described and explained by an analogous rheological model. This model is used to determine the material functions and constants for the endochronic formulation. The material law is written in tensor form and keys for its use in a computer program are supplied.

---

RésuméMise en application de la théorie d'endochrones au niveau de la roche saline A partir de la théorie d'endochrones, l'on développe une loi des matières pouvant décrire le comportement de la roche saline. Dans cette optique, l'on présente les conceptions de base de cette théorie générale, telles qu'elles ont été développées par Valanis pour les métaux et par Bazant-Bhat pour le béton.Le comportement de déformation de la roche saline, caractérisé par une tendance marquée à ramper, est explicité et décrit à l'aide d'un modèle rhéologique. Le modèle rhéologique sert à la détermination des fonctions et constantes de matières, se trouvant dans la formulation d'endochrones. La loi des matières est formulée de facon tensorielle et l'on donne des instructions quant à son application au niveau des ordinateurs.

---

---

Mit 5 Abbildungen     

Raman spectroscopic study of PbCO3 at high pressures and temperatures

Cerussite (PbCO₃) has been investigated by high-pressure and high-temperature Raman spectroscopy up to pressures of 17.2 GPa and temperatures of 723 K. Two pressure induced phase transitions were observed at about 8.0(2) and 16.0(2) GPa, respectively. The post-aragonite transition (PbCO₃-II) at 8.0(2) GPa is accompanied by softening of the v ₂-out-of-plane mode of the CO ₃ ^2? group and disappearance of the B_1g (v ₄-in-plane band of the CO ₃ ^2? group) mode. Stronger shifts of the carbonate group modes after the phase transition suggest that the new structure is more compressible. The formation of a second high-pressure polymorph begins at about 10 GPa. It is accompanied by the occurrence of three new bands at different pressures and splitting of the v ₁-symmetric C–O stretching mode of the CO ₃ ^2? group. The transitions are reversible on pressure release. A semi-quantitative phase diagram for PbCO₃ as a function of pressure and temperature is proposed.     

Measuring Tourist’s Water Footprint in a Mountain Destination of Northwest Yunnan, China

Monitoring and minimizing tourist’s water consumption is essential for the sustainable development of mountain destinations in the world. However, available data and a generally accepted protocol on such measurement are still limited. This study uses water footprint accounting to quantify tourist’s water demand in the Liming valley, a World Heritage site and a rapidly growing tourism destination in Northwest Yunnan, China. Both the water for direct and indirect use is taken into account based on the consump...     

Deciphering an Archean mantle plume: Abitibi greenstone belt,Canada

The 2724–2722 Ma Stoughton-Roquemaure Group (SRG) of the Abitibi greenstone belt (the Archean Superior Province, Canada) is a ≤ 2 km thick komatiite–basalt succession intermittently exposed for about 50 km along strike. The ultramafic and mafic rocks occur mainly as pillowed, brecciated, and massive flows with well preserved spinifex textures in the komatiites. Volcanological, comparative stratigraphic and geochemical studies of the group along a volcanic marker horizon at the base of the succession allow the assessment of magma emplacement processes and mantle source rocks. Major feeder channels, secondary distributary tubes surrounded by pillowed flows with minor breccias and hyaloclastites display facies architecture of small volume flow fields (1–2 km³). Within the SRG, Al-depleted (ADK; Barberton-type) and Al-undepleted (AUK; Munro-type) komatiitic lavas are intercalated with tholeiitic basalt flows at a m- to 10s of m scale. Basalts and komatiites are inferred to be mantle plume-related; both rock types form two groups with characteristics of ADK and AUK including Al₂O₃/TiO₂ ~ 9–12 for ADK versus 17–22 for AUK, as well as (Gd/Yb)_n with > 1.3 versus ~ 1, respectively. The interdigitation of compositionally different flow units, limited extent of SRG volcanic rocks and facies architecture with the prevalence of small volume flows argue for a relatively small, heterogeneous mantle plume during the incipient stage of the evolution of the Archean Abitibi belt. Assuming that the scale of heterogeneities is comparable to the field expression of compositional changes and stratigraphy, it can be suggested that geochemical plume ‘layering’ is on 10s to 100s of m-scale. The evolution of this Archean mantle plume from inception to demise compares favorably with the Yellowstone hotspot which is assumed to have developed over 17 m.y. and had a diameter of about 300 km.     

The last 40 ka tephrostratigraphic record of Lake Ohrid,Albania and Macedonia: a very distal archive for ash dispersal from Italian volcanoes

A 1075 cm long core (Lz1120) was recovered in the south-eastern part of the Lake Ohrid (Republics of Macedonia and Albania) and sampled for identification of tephra layers. Magnetic susceptibility investigations show rather high magnetic values throughout the core, with peaks unrelated to the occurrence of tephra layers but instead to the relative abundance of detrital magnetic minerals in the sediment. Naked-eye inspection of the core allowed us to identify of two tephra layers, at 896–897 cm and 1070–1075 cm. Laboratory inspection of the grain-size fraction > 125 μm allowed for the identification of a third cryptotephra at 310–315 cm. Major element analyses on glass shards of the tephra layers at 896–897 cm and 1070–1075 cm show a trachytic composition, and indicate a correlation with the regionally dispersed Y-3 and Y-5 tephra layers, dated at ca 30 and 39 cal ka BP. The cryptotephra at 310–315 cm has a mugearitic–benmoreitic composition, and was correlated with the FL eruption of Mt. Etna, dated at 3370 ± 70 cal yr BP. These ages are in agreement with five ¹⁴C AMS measurements carried out on plant remains and macrofossils from the lake sediments at different depths along the core.     

The Y-3 tephra: A Last Glacial stratigraphic marker for the central Mediterranean basin

The paper reviews the existing data on the Y-3 tephra layer, first recognised in the Ionian Sea (Mediterranean basin). The collection and collation of old and new data on distal tephra occurrences in terrestrial, marine and lacustrine successions indicate that the Y-3 layer is dispersed over a wide area of the central Mediterranean basin. The peculiar homogeneous chemical composition of this layer makes its recognition rather straightforward and permits it being distinguished from other stratigraphically adjacent tephras. The best age estimate for the Y-3 layer of ca 30–31 cal ka BP, its peculiar stratigraphic position close to the Marine Isotope Stage 3/2 transition or Heinrich Event 3 onset, as well as its wide dispersion makes this layer an important marker to link and date late Pleistocene terrestrial and marine archives of the central Mediterranean basin.