The origin of selected lunar geochemical anomalies: Implications for early volcanism and the formation of light plains

The Apollo orbital geochemistry, photogeologic, and other remote sensing data sets were used to identify and characterize geochemical anomalies on the eastern limb and farside of the Moon and to investigate the processes responsible for their formation. The anomalies are located in the following regions: (1) Balmer basin, (2) terrain northeast of Mare Smythii, (3) near Langemak crater, (4) Pasteur crater, (5) terrain northwest of Milne basin, (6) northeast of Mendeleev basin, (7) north and northeast of Korolev basin, (8) terrain north of Taruntius crater, and (9) terrain north of Orientale basin. The anomalies are commonly associated with Imbrian- or Nectarian-aged light plains units which exhibit dark-haloed impact craters. The results of recent spectral reflectance studies of dark-haloed impact craters plus consideration of the surface chemistry of the anomalies strongly indicate that those geochemical anomalies associated with light plains deposits which display dark-haloed impact craters result from the presence of basaltic units that are either covered by varying thickness of highland debris or have a surface contaminated with significant amounts of highlands material. The burial or contamination of ancient volcanic surfaces by varying amounts of highland material appears to have been an important (though not the dominant) process in the formation of lunar light plains. Basaltic volcanism on the eastern limb and farside of the Moon was more extensive in both space and time than has been accepted.     

Experimental simulation of Titan's atmosphere: Detection of ammonia and ethylene oxide

For several years now, an experimental simulation of Titan's atmosphere has been on going at LISA. A cold plasma is established in a gas mixture representative of the atmosphere of the satellite. In these experiments, more than 70 organic compounds have been identified, including the first identification in this type of experimental simulation of C₄N₂ already detected in its solid form on Titan, which suggests that the setup correctly mimics the chemistry of Titan's atmosphere.We have carried out the first experimental simulation including O-containing compounds in order to study the influence of the presence of CO on the chemical behavior of Titan's atmosphere. With the help of gas chromatography–mass spectrometry (GC–MS) and infrared spectroscopy (IRS) we can thus determine which minor species still undetected in Titan's atmosphere are likely to be present and understand the complex chemistry of the atmosphere of this satellite. Surprisingly we have identified unpredicted O-containing gaseous compounds, mainly ethylene oxide (also named oxirane, C₂H₄O). This molecule has been observed in the interstellar medium by observation in the millimeter region (Astrophys. J. 489 (1997) 553; Astron. Astrophys. 337 (1998) 275). On the contrary, the predicted O-compounds (formaldehyde and methanol) have not been identified in this experiment. Furthermore, we have identified NH₃ in the gaseous products with an initial mixture of N₂ (98%) and CH₄ (2%).The paper describes the experimental device used in this work, in particular the IRS and GC–MS techniques. We also comment the results related to the detection of the O-containing compounds and NH₃ and their implications on our knowledge of the chemistry of Titan's atmosphere and on the retrieval of the future Titan data expected from Cassini-Huygens.     

Screening of polymers on selected Hawaii soils for erosion reduction and particle settling

In recent years, high‐molecular‐weight anionic polyacrylamides (PAMs) have been tested on a variety of soils, primarily in temperate climates. However, little information is available regarding the effectiveness of PAM for preventing soil loss through runoff in tropical settings. Screening tests were performed using three negatively charged PAMs and one positively charged PAM on five Hawaii soils (two Oxisols, one Vertisol, and two Aridisols) to determine erosion loss, sediment settling, and aggregate stability. A laboratory‐scale rainfall simulator was used to apply erosive rainfall at intensities from 5 to 8·5 cm h^?1 at various PAM doses applied in both dry and solution forms. Soil detachment due to splash and runoff, as well as the runoff and percolate water volumes, were measured for initial and successive storms. The impact of PAM on particle settling and aggregate stability was also evaluated for selected soil‐treatment combinations. Among the PAMs, Superfloc A‐836 was most effective, and significantly reduced runoff and splash sediment loss for the Wahiawa Oxisol and Pakini Andisol at rates varying between 10 and 50 kg ha^?1. Reduced runoff and splash sediment loss were also noted for PAM Aerotil‐D when applied in solution form to the Wahiawa Oxisol. Significant reductions in soil loss were not noted for either the Lualualei Vertisol or the Holomua Oxisol. It is believed that the high montmorillonite content of the Lualualei Vertisol and the low cation‐exchange capacity of the Holomua Oxisol diminished the effectiveness of the various PAMs tested. The polymers were also found to enhance sediment settling of all soils and helped improve their aggregate stability. This screening study shows the potential use of PAM for tropical soils for applications such as infiltration enhancement, runoff reduction, and enhanced sedimentation of detention ponds. Copyright © 2005 John Wiley & Sons, Ltd.     

Subaqueous pyroclastic flows and ignimbrites: an assessment

An assessment of the literature on subaqueous pyroclastic flows and their deposits shows that the term pyroclastic flow is frequently used loosely to describe primary, hot gas-rich pyroclastic flows, mass-flows which resulted from the transformation of gassupported flows into water-supported ones, and secondary mass-flows carrying redeposited pyroclastic debris. Based on subaerial pyroclastic flows, the term pyroclastic flow should be restricted to demonstrably hot, gas-rich mass-flows of pyroclastic debris. Using this definition, very few examples of subaqueous pyroclastic deposits with evidence for hot emplacement and of having been wholly submerged have been described. In the majority of these cases, the evidence for a hot state of emplacement and for the subaqueous nature of the host depositional environment is inadequate. The only unequivocal cases of hot pyroclastic flow deposits with adequate supporting evidence are the Ordovician nearshore, shallow marine ignimbrites of Ireland and Wales, and Miocene ignimbrites of southwest Japan, resulting from the passage of subaerially erupted pyroclastic flows into shallow water. Other possible examples are near-vent dense clast deposits in the Donzurobo Formation of Japan, possible submarine intra-caldera ponded ignimbrite successions in California and Wales, and near-vent pumiceous deposits of Ramsay Island, Wales. All other purported cases are either clearly the result of water-supported mass-flow transportation and deposition (debris avalanches, debris flows, turbidity currents), or lack adequate supporting evidence regarding the heat state or the palaeoenvironment. Only the shallow marine ignimbrites of Ireland and Wales show adequate evidence of welding, but even these could have been nearly wholly exposed above sea-level when welding occurred. We conclude that when pyroclastic flows enter water they are generally disrupted explosively and/or ingest water and transform into water-supported mass-flows, and we suggest the various scenarios in which this occurs. There is no evidence to suggest that welding in wholly subaqueous environments is common.     

Coronal mass ejection associated with the stationary post-flare arch of 21–22 May 1980

By using a combination of X-ray (HXIS), H (Haleakala), white-light corona (Solwind), and zodiacal light (Helios) images on 21–22 May, 1980 we demonstrate, and try to explain, the co-existence of a coronal mass ejection with a stationary post-flare coronal arch. The mass ejection was seen, both by Solwind and Helios, in prolongation of the path of a powerful spray, whereas the active region filament did not erupt. A tentative comparison is made with other occurrences of stationary, or quasi-stationary post-flare coronal arches.     

Age estimates of coastal terraces in the Andaman and Nicobar Islands and their tectonic implications

The great Indian Ocean earthquake of December 26, 2004 caused significant vertical changes in its rupture zone. About 800 km of the rupture is along the Andaman and Nicobar Islands, which forms the outer arc ridge of the subduction zone. Coseismic deformation along the exposed land could be observed as uplift/subsidence. Here we analyze the morphological features along the coast of the Andaman and Nicobar Islands, in an effort to reconstruct the past tectonics, taking cues from the coseismic effects. We obtained radiocarbon dates from coastal terraces of the island belt and used them to compute uplift rates, which vary from 1.33 mm yr^− 1 in the Little Andaman to 2.80 mm yr^− 1 in South Andaman and 2.45 mm yr^− 1 in the North Andaman. Our radiocarbon dates converge on  600 yr and  1000 yr old coastal uplifts, which we attribute to the level changes due to two major previous subduction earthquakes in the region.     

Origin of nickel in water solution of the chalk aquifer in the north of France and influence of geochemical factors

In the north of France, high registers of nickel are sometimes recorded within the chalk aquifer. In a confined context, the presence of pyrite in the covering clays or in the marcasite nodules encrusted in the clay may constitute a natural source of trace metals. With an objective of sanitary control, the limits of chemical contents regulating the quality of water destined for human consumption have been lowered by the European Framework Directive in the field of water policy (2000/60/EC). As a result, nickel limits have been reduced from 50 to 20 μg/l. The analyses, carried out on three water catchment fields in our area of study, were centred on variable parameters (Eh, O₂(d), pH, Conductivity, T°), major elements (SO₄, NO₃) and metals (Fe, Ni, Mn, Co). The acquired data enabled us to identify from one hand, the conditions which are presented within the site, special thanks to the evolution of nitrate and iron contents and on the other hand, the natural origin (geological) of nickel for two of the three sites studied based essentially on the evaluation of the Nickel/Cobalt ratio. Thus, on the first site, the evolution of nickel content and nitrate content showed the influence of the phenomenon of denitrification on the re-mobilisation of the nickel. Whereas on the second site, a high variation of total iron content and oxygen dissolved in solution highlighted a particular phenomenon of oxidation of the pyrite through molecular oxygen. Finally, the correlation with the sulphates clearly showed behaviour of the nickel, once released, that was entirely dependent on the phenomenon of adsorption on the iron and manganese hydroxides.     

Core formation and the oxidation state of the Earth: Additional constraints from Nb, V and Cr partitioning

We have combined metal-silicate partitioning data from the literature with new experimental results at 1.5-8 GPa and 1480-2000 °C to parameterize the effects of pressure, temperature and composition on the partitioning of V, Cr and Nb between liquid Fe metal (with low S and C content) and silicate melt.Using information from the steelmaking literature to correct for interactions in the metal phase, we find that, for peridotitic silicate melts, metal-silicate partition coefficients are given by: