Benthic community patterns reflect water column processes in the Northeast Water polynya (Greenland)

Benthic community patterns were investigated in the Northeast Water polynya (Greenland) during the summers of 1992 and 1993 to elucidate to what extent the bottom fauna is influenced by the dynamics of the overlying water. Five different fractions of the benthos (foraminiferans, nematodes, polychaetes, peracarid crustaceans, and epibenthic megafauna), ranging in average adult body size over 6 orders of magnitude (from about 100 μm to about 10 cm), were sampled quantitatively at 69 stations in water depths from 40 to 515 m. Total abundances of nematodes, polychaetes and peracarid crustaceans were found to be primarily correlated with parameters characterizing the potential benthic food supply (water column pigment and nitrate concentrations, sediment bound pigments and sediment biological activity), whereas abundances of foraminiferans and megabenthos were largely associated with seabed properties. Four benthic zones were distinguished by separately analyzing the faunistic composition and distribution of the five community fractions for Ob Bank, Western Westwind Trough, Eastern Westwind Trough, and Belgica Trough. This pattern was shown principally to reflect pelagic regimes differing in surface water hydrography, ice cover and euphotic productivity. This is the first time that a synoptic study of several benthic community portions spanning such a range in sizes and life styles has been performed in a polar shelf ecosystem. Our results indicate that abundances as well as composition of Arctic benthos are largely influenced by mesoscale pelagic processes, and thus provide further evidence for the importance of the benthic-pelagic coupling in high latitude seas.     

Dynamics of ships running aground

A comprehensive dynamic model is presented for analysis of the transient loads and responses of the hull girder of ships running aground on relatively plane sand, gravel, or rock sea bottoms. Depending on the seabed soil characteristics and the geometry of the ship bow, the bow will plow into the seabed to some extent. The soil forces are determined by a mathematical model based on a theory for frictional soils in rupture and dynamic equilibrium of the fluid phase in the saturated soil. The hydrodynamic pressure forces acting on the decelerated ship hull are determined by taking into account the effect of shallow water. Hydrodynamic memory effects on the transient hull motions are modeled by application of an impulse response technique. The ship hull is modeled as an elastic beam to determine the structural response in the form of flexural and longitudinal stress waves caused by the transient ground reaction and hydrodynamic forces. A number of numerical analysis results are presented for a VLCC running aground. The results include bow trajectory in the seabed, time variation of the grounding force, and the maximum values of the sectional shear forces and bending moments in the hull girder.     

Grounding experiments on soft bottoms

To verify a theoretical analysis procedure for calculation of the hull girder response of ships running aground, a series of large-scale ship grounding experiments was performed on an artificial island made of engineered fill. The tests were conducted by running a condemned fishing vessel up on selected beaches of the island with velocities ranging between 2m/s and 5.5m/s. During the tests, surge, heave, and pitch accelerations were measured and also the deformations of the beach and the ship bow. Based on these accelerations, rigid body velocities and motions were determined. The forces arising from the interaction between the bow of the vessel and the seabed were determined by solving the equations of motions. This article describes the analysis of the measured results and a comparison of the results from the full-scale measurements with results from a recently developed analysis procedure for grounding on soft bottoms. Presented at the International Conference on Technology for Marine Environment Preservation (MARIENV '95), Tokyo, Japan, September 24–29, 1995.     

Review and application of ship collision and grounding analysis procedures

It is the purpose of the paper to present a review of prediction and analysis tools for collision and grounding analyses and to outline a probabilistic procedure for which these tools can be used by the maritime industry to develop performance based rules to reduce the risk associated with human, environmental and economic costs of collision and grounding events. The main goal of collision and grounding research should be to identify the most economic risk control options associated with prevention and mitigation of collision and grounding events.     

Vibrations of imperfect ship plating

This paper deals with vibration analysis of plates in marine structures. It is the main purpose of the paper to demonstrate that in order to obtain reliable frequency predictions it is necessary to include in the vibration analysis the effects of the unavoidable imperfections caused by welding or lateral fluid pressure. Furthermore, practical procedures for including these effects are presented. Simple algebraic expressions are derived for determination of small amplitude natural frequencies of vibration of initially imperfect rectangular plates subjected to uniaxial in-plane loads. The theoretical results show close agreement with experimental results available in the literature. For plating of marine structures with typical welding induced geometric imperfections and residual stresses it is shown that the lowest natural frequency of the unloaded imperfect plate can be twice as high as that of the perfect plate. For vibration analyses of plates submerged in a liquid the importance of taking into account deflections and membrane stresses caused by the hydrostatic pressure is demonstrated.     

On Impact mechanics in ship collisions

The purpose of this paper is to present analytical, closed-form expressions for the energy released for crushing and the impact impulse during ship collisions. Ship–ship collisions, ship collisions with rigid walls and ship collisions with flexible offshore structures are considered. The derived mathematical models include friction at the contact point so that situation where the collision results in a sliding motion is included. Results obtained by application of the present procedure are compared with results obtained by time simulations and good agreement has been achieved. In addition, a number of illustrative examples are presented. The procedure presented in the paper is well suited for inclusion in a probabilistic calculation model for damage of ship structures due to collisions.     

Mortality through ontogeny of soft-bottom marine invertebrates with planktonic larvae

The present survey covers one spawning season of marine benthic invertebrates in a large geographical area, the inner Danish waters, and includes a wide range of habitats with steep salinity and nutrient load gradients. The loss ratios of soft-bottom marine invertebrates from one development stage to the next is calculated based on average abundances of pelagic larvae, benthic post-larvae and adults of Bivalvia, Gastropoda, Polychaeta and Echinodermata, with planktonic development. This gives a rough estimate of the larval and post-larval mortality. Loss ratios between post-larvae stage and adult stage (post-larval mortality) varies from 3:1 to 7:1 (71.2–84.9%) and loss ratios between larvae and post-larvae (larval mortality) and between larvae and adult, ranging from 7:1 to 42:1 (85.2–97.6%) and from 45:1 to 210:1 (97.8–99.5%), respectively. The results show a remarkable unity in loss ratios (mortality) between the mollusc taxa (Bivalvia and Gastropoda) at the phylum/class level. This similarity in loss ratios among the mollusc taxa exhibiting the same developmental pathways suggests that the mortality is governed by the same biotic and abiotic factors. Larval mortality is estimated to range from 0.10 d^− 1 to 0.32 d^− 1 for Bivalvia and ranging from 0.09 d^− 1 to 0.23 d^− 1 for Polychaeta. The species loss ratios combined with specific knowledge of the reproduction cycles give estimated loss ratios (mortality) between the post-larvae and the adult stage of 25:1 and 14:1 for the bivalves Abra spp. and Mysella bidentata. For the polychaete Pygospio elegans the loss ratio (larval mortality) between the larvae and the post-larval stage is 154:1 and between the post-larvae and the adult stage 41:1. For Pholoe inornata the loss ratio between post-larvae and adults is 7:1. The present results confirm that the larval stage, metamorphosis and settlement are the critical phase in terms of mortality in the life cycle for Bivalvia. Assuming steady state based on actual measurements of pelagic larval densities an estimated input to the water column of pelagic bivalve larvae is ranging from 10,930 to 17,157 larvae m^− 2 d^− 1 and for Polychaeta between 2544 and 3994 larvae m^− 2 d^− 1. These estimates seem to correspond to the reproductive capacity of the observed adult densities using life-table values from the literature.The potential settlement of post-larvae is 43 post-larvae m^− 2 d^− 1 for Bivalvia and 56 post-larvae m^− 2 d^− 1 for Polychaeta. The adult turnover time for Bivalvia is estimated to be 1.5 years and 2.1 years for Polychaeta. This exemplifies that species with short generation times may dominate in very dynamic transitional zones with a high frequency of catastrophic events like the frequent incidents of hypoxia in the inner Danish waters.     

Collapase analysis of ship hulls

This paper presents an efficient finite element procedure for the collapse analysis of ship hulls under complicated loads. A set of finite elements, such as beam-column elements, stiffened plate elements, and shear panel elements are developed, directly accounting for the geometrical and material non-linearities and initial imperfections.

Elastic-plastic stiffness matrices for elements have been derived by combining elastic large displacement analysis theories with a plastic hinge model. The buckling and post-buckling behaviour of plates is included using an effective width concept. The procedure is effective, since few mode-points are necessary and numerical integration for evaluating stiffness matrices is avoided. Fracture mechanics criteria are introduced in order to account for tension tearing rupture and brittle failure of the material.

Practical applications to ultimate longitudinal strength analysis of ship hulls and tanker collision analysis are presented. The procedure can also be used for collapse analysis of offshore and onshore structures.     

Estimating the inefficiency in the Norwegian bus industry from stochastic cost frontier models

A stochastic cost frontier function based on data from 170 of the 175 Norwegian subsidized bus companies is estimated under two alternative presumptions regarding the distribution of the inefficency among the bus operators. When the inefficiency is assumed to be half-normally distributed, the average inefficiency in the industry is estimated to be 13.7 per cent. This calculated value is nearly halved (7.2 per cent) when the exponential distribution is applied, while the ranking of the companies according to inefficiency is unchanged. By regressing the estimated inefficiency values for each company on some exogenous variables describing its ownership structure and the subsidy policy which it faces, it is seen that inefficiency of the companies which negotiate with the public authorities over the subsidy amounts is slightly higher than the inefficiency of the companies which face a subsidy policy based on cost norms. Our analysis gives, however, no significant differences in the efficiency between privately owned bus companies and publicly owned bus operators, and shows only minor economies of scale.