Distribution of suspended sediment in the coastal sea off the Ganges–Brahmaputra River mouth: observation from TM data

Remote sensing technique was applied to estimate suspended sediment concentration (SSC) and to understand transportation, distribution and deposition of suspended sediment in the estuary and throughout the coastal sea, off the Ganges–Brahmaputra River mouth. During low river discharge period, zone of turbidity maximum is inferred in the estuary near the shore. SSC map shows that maximum SSC reaches 1050 mg/l in this period. Magnitude of SSC is mainly owing to resuspension of the bottom surface sediments induced by tidal currents flowing over shallow water depths. The influence of depth on resuspension is farther revealed from the distribution and magnitude of SSC along the head of Swatch of No Ground (SNG) submarine canyon. During high river discharge period, huge river outflow pushed the salt wedge and flashes away the suspended sediments in the coastal sea off the river mouth. Zone of turbidity maximum is inferred in the coastal water approximately within 5–10 m depth of water, where the maximum SSC reaches 1700 mg/l. In this period, huge fluvial input of the suspended sediments including the resuspended bottom sediments and the particles remaining in suspension for longer period of time since their initial entry control mainly the magnitude of SSC. In the estuary near the shore, seasonal variation in the magnitude of SSC is not evident. In the coastal sea (>5 m water depth), seasonal influence in the magnitude of SSC could be concluded from the discrepancy between SSC values of two different seasons. Transportation and deposition of suspended sediments also experiences seasonal variations. At present, suspended sediments are being accumulated on the shallow shelf (between 5 and 10 m water depth) in low discharge period and on the mid-shelf (between 10 and 75 m water depth) during high discharge period. An empirical (exponential) relationship was found between gradual settle down of suspended sediments in the coastal sea and its lateral distance from the turbidity maximum.     

Course Tracking Control Algorithm Using Visual Information

Automatic steering control algorithm has been proposed, which uses the motion of objects in a visual image (Optical Flow) obtained from an ITV camera looking ahead in the situation without forward vehicles. This algorithm is improved to be applicable to the situation in which the forward tracking course is invisible owing to the interfarence of the forward vehicles. The adjustment of the control parameters against the change in vehicle speed is confirmed by the computer simulation experiments.     

Long-term prediction method for the green water load and volume for an assessment of the load line

 To develop a practical prediction method for the green water load and volume on the bow deck in irregular waves, model tests were conducted using a tanker and a cargo ship on a domestic Japanese voyage. The relation between green water load and relative water height at the stem was considered. Based on the finding that the maximum value of the green water load is proportional to the square of the maximum value of the water elevation over the bow top, the probability density functions of the green water load and volume in short-term predictions were proposed. It was verified that the proposed functions show good agreement with the measured distributions, especially in the tails, and were better than conventional functions. Using these functions, long-term predictions of the green water load were carried out. It was confirmed that the present method is more rational than the conventional one for estimating the long-term probability of the green water load. An assessment of the bow height of a domestic Japanese ship from the viewpoint of deck wetness was carried out using these prediction methods. This research was used as the technical background for the revision of domestic rules on load lines, which was enforced in October 2001. Received: July 19, 2002 / Accepted: October 30, 2002 Acknowledgment. Some of the present study was carried out as part of a cooperation project (RR45) with the Shipbuilding Research Association of Japan, supported by the Nippon Foundation. Address correspondence to: Y. Ogawa (e-mail: ogawa@nmri.go.jp)     

Fracture control of extremely thick welded steel plates applied to the deck structure of large container ships

The rapid enlargement of the size of container ships has led to the application of extremely thick plate in the deck structures, which may grow concerns about the fracture toughness at the butt-weld with large amount of heat input, and the arrest toughness of brittle crack propagation in the base metal of such thick plates. Also, slam-induced whipping stresses might affect the fatigue crack propagation and the initiation of a brittle crack in a container ship. In order to prevent the catastrophic failure of deck structures by brittle fracture, national joint research projects, which focused on the safety-related issues of extremely thick steel plate applied to hull of large container ships, were formed from April 2007 to March 2011 organized by the Japan Ship Technology Research Association (JSTRA) supported by the Japanese Government in collaboration with universities, national research institute, classification societies and relevant industries including shipbuilding, steel manufacturing and shipping companies. The joint research projects have carried out the investigations on crack initiation toughness of the weld, fatigue crack propagation under seaway loading, the potential of defect detection by ultrasonic testing, and the crack-arrest methods after brittle crack propagation. Practical recommendations to prevent brittle fracture of large container ships were proposed based on these comprehensive investigations. The essential parts of the above research activities are presented in this paper.