Investigation of CH4 Reforming with CO2 on Meso-Porous Al2O3-Supported Ni Catalyst

Meso-porous Al₂O₃-supported Ni catalysts exhibited the highest activity, stability and excellent coke-resistance ability for CH₄ reforming with CO₂ among several oxide-supported Ni catalysts (meso-porous Al₂O₃ (Yas1-2, Yas3-8), -Al₂O₃, -Al₂O₃, SiO₂, MgO, La₂O₃, CeO₂ and ZrO₂). The properties of deposited carbons depended on the properties of the supports, and on the meso-porous Al₂O₃-supported Ni catalyst, only the intermediate carbon of the reforming reaction formed. XRD and H₂-TPR analysis found that mainly spinel NiAl₂O₄ formed in meso-porous Al₂O₃ and -Al₂O₃-supported catalysts, while only NiO was detected in -Al₂O₃, SiO₂, CeO₂, La₂O₃ and ZrO₂ supports. The strong interaction between Ni and meso-porous Al₂O₃ improved the dispersion of Ni, retarded its sintering and improved the activated adsorption of CO₂. The coking reaction via CH₄ temperature-programed decomposition indicated that meso-porous Al₂O₃-supported Ni catalysts were less active for carbon formation by CH₄ decomposition than Ni/-Al₂O₃ and Ni/-Al₂O₃.     

A new method of reinforcing graphene nanoplatelets in glass/epoxy composites

This research aims to develop a method for the amalgamation of graphene nanoplatelets in glass/epoxy composites. The poor interface bonding between the fiber and matrix is critical and hinders the full performance of the composites. Glass fabric and epoxy were used as reinforcement and matrix in the composite, respectively. Graphene nanoplatelets were utilized as an additional nano-materials filler for the composites. Glass/graphene/epoxy and glass/epoxy composites were fabricated via vacuum infusion molding. The new method of applying graphene nanoplatelets as secondary reinforcement in the composite was developed based on proper functionalization in the sonication process. The physical, tensile, flexural, and short beam interlaminar properties of fabricated composites were examined to analyze the method's effectiveness. The results showed that density decreased by around 5 %; however, thickness increased by around 34 % after introducing graphene nanoplatelets into the composites. The tensile strength and modulus of the composites declined by approximately 19 %, on the other hand, flexural strength and modulus increased by around 63.3 % and 8.3 %, respectively, after the addition of graphene nanoplatelets into the composites. Moreover, interlaminar shear strength of the composite was enhanced by approximately 50 %.     

Resilience Assessment of Water Resources System

The resilience perspective, which emphasizes the integrated, systemic concept of human and nature interactions, is increasingly used as an approach for understanding the dynamic of social-ecological system. As the water resources system (WRS) is a social-ecological system, resilience thinking such as Holling??s adaptive cycle has been adopted as a fundamental unit for understanding the water resources system dynamics in this paper. In the adaptive cycle of WRS, the likelihood shift among different phases largely depends on resilience value; and a quantitative method for estimating the resilience of WRS is proposed. The method is related to the degree of change and characteristics of the WRS, and has been applied to identify the phase of WRS in every city in Zhejiang province, China. The results of resilience assessment have also been discussed in terms of adaptive cycle.     

A chemically amplified molecular glass resist with an ionic photoacid generator and a single protection group

A molecular glass resist with an ionic photoacid generator and a single protection group (MR‐1) has been developed. MR‐1 exhibited good thermal properties, such as a 5% weight loss temperature (T_d5%) of 167°C and a glass transition temperature (T_g) of 80°C. MR‐1 showed the good sensitivity of 80 μC/cm² and high contrast of 4.9 with e‐beam exposure (50 keV). A relatively high resolution of 50 nm and low Line‐Edge‐Roughness of 3.8 nm were obtained by e‐beam exposure (100 keV). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39769.     

Droplet-based biochemical assay by magnetic wire manipulation between multiple droplets

Reaction performance of a droplet-based biochemical assay technique that uses magnetic wires as sample carriers is evaluated. Wires 2.0 mm in length, 0.05 mm in width, and 0.02 mm in thickness are fabricated by chemical etching, introduced into a droplet immersed in oil, and manipulated by the magnetic force of a moving magnet. Alkaline-phosphatase as an enzyme is immobilized on the wire surfaces by applying Au and self-assembled monolayer coatings, and the method’s on-chip reaction performance is evaluated. The enzymatic reaction is found to increase linearly as the number of wires and the reaction time increase. Relatively high performance reproducibility for enzymatic reactions is obtained; on average, the reaction absorbance, standard deviation, and coefficient of variance are found to be respectively 1.14, 0.103, and 9.1 %. The conductivity change in a fused droplet is used to evaluate the absolute volume of liquid transferred with the extracted wires and a value of 0.33 μl is obtained.     

RSA-OAEP Is Secure under the RSA Assumption

Recently Victor Shoup noted that there is a gap in the widely believed security result of OAEP against adaptive chosen-ciphertext attacks. Moreover, he showed that, presumably, OAEP cannot be proven secure from the one-wayness of the underlying trapdoor permutation. This paper establishes another result on the security of OAEP. It proves that OAEP offers semantic security against adaptive chosen-ciphertext attacks, in the random oracle model, under the partial-domain one-wayness of the underlying permutation. Therefore, this uses a formally stronger assumption. Nevertheless, since partial-domain one-wayness of the RSA function is equivalent to its (full-domain) onewayness, it follows that the security of RSA-OAEP can actually be proven under the sole RSA assumption, although the reduction is not tight.     

A Novel KCaNi/α-Al2O3 Catalyst for CH4 Reforming with CO2

A potassium and calcium co-promoted nickel catalyst (KCaNi/-Al₂O₃) prepared by a direct impregnation method possessed a high activity, high stability and excellent coke resistance properties in CH₄ reforming with CO₂. XRD, XPS and H₂-TPR characterizations indicated that (i) Ca and K strengthened the interaction between Ni and -Al₂O₃ and promoted the formation of a unique NiAl₂O₄ phase on the surface of the catalyst and (ii) Ca and K increased the dispersion of Ni and retarded its sintering. Coking reactions (CH₄ temperature-programmed decomposition and O₂-TPO) disclosed that K reduced carbon formation via CH₄ decomposition.     

The Effects of Insulin on Immortalized Rat Schwann Cells,IFRS1

Schwann cells play an important role in peripheral nerve function, and their dysfunction has been implicated in the pathogenesis of diabetic neuropathy and other demyelinating diseases. The physiological functions of insulin in Schwann cells remain unclear and therefore define the aim of this study. By using immortalized adult Fischer rat Schwann cells (IFRS1), we investigated the mechanism of the stimulating effects of insulin on the cell proliferation and expression of myelin proteins (myelin protein zero (MPZ) and myelin basic protein (MBP). The application of insulin to IFRS1 cells increased the proliferative activity and induced phosphorylation of Akt and ERK, but not P38-MAPK. The proliferative potential of insulin-stimulated IFRS1 was significantly suppressed by the addition of LY294002, a PI3 kinase inhibitor. The insulin-stimulated increase in MPZ expression was significantly suppressed by the addition of PD98059, a MEK inhibitor. Furthermore, insulin-increased MBP expression was significantly suppressed by the addition of LY294002. These findings suggest that both PI3-K/Akt and ERK/MEK pathways are involved in insulin-induced cell growth and upregulation of MPZ and MBP in IFRS1 Schwann cells.     

Experimental investigation of melt pool behaviour during selective laser melting by high speed imaging

Melt pool behaviour and the characteristics of the surrounding metal powder during selective laser melting (SLM) are captured using high-speed imaging, and the influence of the substrate temperature and the line building sequence on the formation of the built structure and the generation of spatter particles is experimentally investigated. The results indicate that the substrate temperature has a measurable effect on the formation of droplets and the generation of spatter particles, while the volume specific energy density of the process was the principal factor affecting the built structure.