Investigation into the therapeutic efficacy of continuous isoproterenol inhalation in relation to respiratory infections in asthmatic children

In our Department, continuous isoproterenol inhalation therapy has been conducted on status asthmatics over the last 10 years. In the present study, we investigated whether there are any differences in the therapeutic efficacy of continuous inhalation of isoproterenol in the presence or absence of respiratory infections which may induce or aggravate asthma attacks. The treatment period was significantly longer in patients with pneumonia. Further prolongation of the treatment period was noted in patients with atelectasis. However, there were no apparent differences in therapeutic efficacy according to age or the severity of attacks. These findings suggest that continuous inhalation of isoproterenol is very effective for status asthmatics if respiratory infections are thoroughly controlled.     

Crystal orientation of β-phase isotactic polypropylene induced by magnetic orientation of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide

Melt crystallization of isotactic polypropylene (iPP), containing crystallites of N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide (DCNDCA) as a nucleating agent of the the β-phase iPP crystal, is carried out under a magnetic field (6 T) to obtain the alignment of the iPP crystal induced by magnetic alignment of DCNDCA. In a previous paper, DCNDCA was reported to undergo magnetic alignment in a liquid suspension. The obtained iPP sample exhibits alignment of the β-phase crystal with the c-axis aligned perpendicular to the magnetic field. The comparison of this alignment of iPP with the reported magnetic alignment of DCNDCA indicates that the β-phase crystal grows epitaxially on the DCNDCA crystal. The (330)_β plane of the iPP crystal lies on the bc-plane of the DCNDCA crystal in which the direction of the c-axis of the iPP coincides with the direction of the b-axis of the DCNDCA crystal.     

Additional kernel observer: privilege escalation attack prevention mechanism focusing on system call privilege changes

International Journal of Information Security - Cyberattacks, especially attacks that exploit operating system vulnerabilities, have been increasing in recent years. In particular, if administrator...     

Pervaporation via silicon-based membranes: Correlation and prediction of performance in pervaporation and gas permeation

Pervaporation (PV) is a membrane technology that holds great promise for industrial applications. To better understand the PV mechanism, PV dehydrations of various types of organic solvents (methanol, ethanol, iso-propanol, tert-butanol, and acetone) were performed on five types of organosilica and two types of silicon carbide-based membranes, all with different pore sizes. Water permeance was dependent on the types of organic aqueous solutions, which suggested that organic solvents penetrated the pores and hindered the permeation of water. In addition, water permeance of various types of membranes in PV was well correlated with hydrogen permeance in single-gas permeation. Furthermore, a clear correlation was obtained between the permeance ratio in PV and that in single-gas permeation, which was confirmed via the modified-gas translation model. These correlations make it possible to use single-gas permeation properties to predict PV performance.     

Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

Development of a flexible autonomous robot without sensors or controllers

Recently, various robots with many degrees of freedom, such as rescue robots and domestic robots, have been developed and used in practical applications. It is difficult to control such robots autonomously in real environments, because in order to control the many degrees of freedom, we have to observe many states, calculate huge amounts of information, and operate many actuators. In this study, we consider a flexible robot without sensors or controllers that can determine the inclination of a slope and climb up the slope. In order to demonstrate the effectiveness of the proposed framework, we have developed a prototype robot and conducted experiments. The result indicates that the robot could determine the inclination and climb up a gentle slope autonomously. Thus, we have realized an autonomous robot that has no explicit sensors or controllers.     

Out‐of‐Plane Strain Induced in a Moiré Superstructure of Monolayer MoS2 and MoSe2 on Au(111)

Making contact of transition metal dichalcogenides (TMDCs) with a metal surface is essential for fabricating and designing electronic devices and catalytic systems. It also generates strain in the TMDCs that plays significant role in both electronic and phonon structures. Therefore, detailed understanding of mechanism of the strain generation is important to fully comprehend the modulation effect for the electronic and phonon properties. Here, MoS₂ and MoSe₂ monolayers are grown on Au surface by chemical vapor deposition and it is demonstrated that the contact with a crystalline Au(111) surface gives rise to only out‐of‐plane strain in both MoS₂ and MoSe₂ layers, whereas no strain generation is observed on polycrystalline Au or SiO₂/Si surfaces. Scanning tunneling microscopy analysis provides information regarding consequent specific adsorption sites between lower S (Se) atoms in the S? Mo? S (Se? Mo? Se) structure and Au atoms via unique moiré superstructure formation for MoS₂ and MoSe₂ layers on Au(111). This observation indicates that the specific adsorption sites give rise to out‐of‐plane strain in the TMDC layers. Furthermore, it also leads to effective modulation of the electronic structure of the MoS₂ or MoSe₂ layer.     

Estimation of time-dependent input from neuronal membrane potential

The set of firing rates of the presynaptic excitatory and inhibitory neurons constitutes the input signal to the postsynaptic neuron. Estimation of the time-varying input rates from intracellularly recorded membrane potential is investigated here. For that purpose, the membrane potential dynamics must be specified. We consider the Ornstein-Uhlenbeck stochastic process, one of the most common single-neuron models, with time-dependent mean and variance. Assuming the slow variation of these two moments, it is possible to formulate the estimation problem by using a state-space model. We develop an algorithm that estimates the paths of the mean and variance of the input current by using the empirical Bayes approach. Then the input firing rates are directly available from the moments. The proposed method is applied to three simulated data examples: constant signal, sinusoidally modulated signal, and constant signal with a jump. For the constant signal, the estimation performance of the method is comparable to that of the traditionally applied maximum likelihood method. Further, the proposed method accurately estimates both continuous and discontinuous time-variable signals. In the case of the signal with a jump, which does not satisfy the assumption of slow variability, the robustness of the method is verified. It can be concluded that the method provides reliable estimates of the total input firing rates, which are not experimentally measurable.     

Analysis of PD-generated SF/sub 6/ decomposition gases adsorbed on carbon nanotubes

Chemical byproducts analysis has been recognized as a powerful diagnosis method for SF₆ gas-insulated switchgear (GIS). The authors have previously demonstrated that a carbon nanotube (CNT) gas sensor could detect partial discharge (PD) generated in SF₆ gas. However, PD-generated decomposition gas species, which were responsible for the CNT gas sensor response, have not been identified yet. In this paper, two kinds of experiments were conducted in order to identify the responsible decomposition gas species. At first, the decomposition gas molecules adsorbed on CNTs were analyzed by Fourier transformation infrared (FTIR) spectroscopy. FTIR absorbance was observed around 735 cm^-1 after CNTs were exposed to PD generated in SF₆. In the second experiment, the CNT gas sensor responses to typical SF₆ decomposition products (HF and SF₄) were examined. The CNT gas sensor responded to these gases in the same way as to PD generated in SF₆. SF₄ response was larger than HF response. Based on these results, SF ₄ and SOF₂ emerged as candidates for the responsible decomposition gases. Electrochemical interactions between adsorbed gas molecules and CNT were discussed based on theoretical predictions of molecular orbital calculations. The calculation results suggested that both of SOF₂ and SF₄ could increase the CNT gas sensor conductance