Zein-based anti-browning cling wraps for fresh-cut apple slices

The usage of cling wraps is emerging as an easy and cost-effective approach to protect fresh-cut fruits and vegetables from dust, whilst improving visual appeal on retail counters. This study focused on developing an alternate, protein-based packaging material as a food grade cling wrap for food packaging applications. Zein-based cling wraps were produced, and their physical and mechanical characteristics were evaluated and compared with conventionally used chitosan biopolymer films and commercial synthetic polymer films. Antioxidant potential of the prepared films was studied, and the effectiveness of the developed films as anti-browning cling wraps was evaluated using studies conducted on fresh-cut apple slices at ambient conditions. Anti-browning effects were in par with polymeric counterparts; however, zein cling wraps could better prevent weight loss in apple slices. Zein-based films can be adopted as biodegradable food grade cling wraps as an alternative to chitosan and synthetic polymeric materials.     

End‐Capping as a Method for Improving Carrier Injection in Electrophosphorescent Light‐Emitting Diodes

The electronic properties, carrier injection, and transport into poly(9,9‐dioctylfluorene) (PFO), PFO end‐capped with hole‐transporting moieties (HTM), PFO–HTM, and PFO end‐capped with electron‐transporting moieties (ETM), PFO–ETM, were investigated. The data demonstrate that charge injection and transport can be tuned by end‐capping with HTM and ETM, without significantly altering the electronic properties of the conjugated backbone. End‐capping with ETM resulted in more closely balanced charge injection and transport. Single‐layer electrophosphorescent light‐emitting diodes (LEDs), fabricated from PFO, PFO–HTM and PFO–ETM as hosts and tris[2,5‐bis‐2′‐(9′,9′‐dihexylfluorene)pyridine‐κ²NC_3′]iridium(III ), Ir(HFP)₃ as the guest, emitted red light with brightnesses of 2040 cd m^–2, 1940 cd m^–2 and 2490 cd m^–2 at 290 mA cm^–2 (16 V) and with luminance efficiencies of 1.4 cd A^–1, 1.4 cd A^–1 and 1.8 cd A^–1 at 4.5 mA cm^–2 for PFO, PFO–HTM, and PFO–ETM, respectively.     

MODE-type algorithm for estimating damped, undamped, or explosive modes

We propose a new algorithm for estimating the parameters of damped, undamped, or explosive sinusoidal signals. The algorithm resembles the MODE algorithm, which is commonly used for direction of arrival estimation in the array signal processing field. It is derived as a natural approximation to an asymptotically (high-SNR) optimal parameter estimator and has excellent statistical accuracy. Nevertheless, it is computationally simple and easy to implement. Numerical examples are included to illustrate the performance of the proposed method.This work has been supported by the Swedish Research Council for Engineering Sciences (TFR).     

Reversing the Lecture/Homework Paradigm Using eTEACH® Web‐based Streaming Video Software

A new online streaming video and multi‐media application called eTEACH, http:eTEACH.engr.wisc.edu was used to reform a large, lecture‐based computer science course for engineering majors. In‐class lectures were replaced with videotaped lectures and other materials that students viewed on the Internet on their own schedule, making it possible to use the live class periods for small, team problem‐solving sessions facilitated by the professors and a teaching assistant. By using the eTEACH application to transform course lectures into “homework” and free up the face‐to‐face class time for working on problems that were similar to homework assignments, the professors effectively reversed the lecture and homework paradigm of a typical large lecture course. A thorough course evaluation over two semesters showed that students who took the online lecture version of the course gave significantly higher ratings to all aspects of the course, including lecture usefulness, professor responsiveness, the course overall, and the instructor. Although a few students missed having the opportunity to ask questions during lectures, about two‐thirds of the 531 students surveyed felt it was easier to take notes and understand the lectures presented via eTEACH than it would have been while attending the same lecture live, and 78% of students appreciated the ability to view and review course lectures on their own schedule.     

Bridge design with reserve and residual reliability constraints

System reliability is evolving as an important design method for selecting components and topology. It should be used to investigate the original intact structure behavior as well as providing sufficient reserve capacity under likely accident and damage scenarios. Highway bridges are an area of special concern since effort to optimize the cost of construction may not provide adequate redundant capacity. The paper describes an example in which a typical girder bridge structure is optimized (both size and girder spacing) to achieve target system performance. System reliability constraints are imposed on the behavior of the intact structure under highway loads. Also, residual system reliability constraints are imposed to control safety under specified accident scenarios corresponding to damage and “lost” members due to corrosion, fatigue, fire or accidental collisions. An optimal design framework for controlling safety under all these life cycle situations is thus provided.     

Effect of storage temperature on phenolics stability in hawthorn (Crataegus pinnatifida var. major) fruits and a hawthorn drink

The stability of five major phenolics, namely (−)-epicatechin (EC), procyanidin B₂ (PC-B₂), chlorogenic acid (ChA), hyperoside (HP) and isoquercitrin (IQ), in hawthorn fruits and a canned hawthorn drink were evaluated during 6 months of storage in the dark at three different temperatures (4, 23 and 40 °C). HPLC with a diode-array detector was used to determine the contents of the individual compounds. The results showed that the studied phenolics in the hawthorn fruits and the drink were both stable at 4 °C and relatively unstable at 23 and 40 °C with varied extents of degradation. At room temperature (23 °C), marked degradations of EC and PC-B₂ were observed in both the fruits and the drink with around 50% and 30% decrease after a 6-month storage, respectively. A more significant decrease of the phenolics was observed at 40 °C, especially for EC and PC-B₂, which were almost completely degraded after a 6-month storage. HP, IQ and ChA were relatively stable at 23 °C, but unstable at 40 °C. Therefore, low-temperature storage is recommended for maintaining the quality and efficacy of hawthorn fruits and its preparations.     

A visual study of the breakdown of emulsions in porous coalescers

A two-dimensional photoetched glass flow cell was used to observe the process by which an emulsion was broken down by a granular porous coalescer. The effects of wettability, emulsion and collector zeta potentials, and emulsion droplet size on the coalescence phenomenon were studied. The possible use of a graded medium or a coalescer with mixed wettability to enhnce the coalescence process was also examined. Based on these visual studies, a set of guidelines was developed to aid in the selection of a porous coalescer for a given separation duty.     

Photo Sequencing

A group of people taking pictures of a dynamic event with their mobile phones is a popular sight. The set of still images obtained this way is rich in dynamic content but lacks accurate temporal information. We propose a method for photo-sequencing—temporally ordering a set of still images taken asynchronously by a set of uncalibrated cameras. Photo-sequencing is an essential tool in analyzing (or visualizing) a dynamic scene captured by still images. The first step of the method detects sets of corresponding static and dynamic feature points across images. The static features are used to determine the epipolar geometry between pairs of images, and each dynamic feature votes for the temporal order of the images in which it appears. The partial orders provided by the dynamic features are not necessarily consistent, and we use rank aggregation to combine them into a globally consistent temporal order of images. We demonstrate successful photo-sequencing on several challenging collections of images taken using a number of mobile phones.