Investigations of surface characterization of silicone rubber due to tracking phenomena under a.c. and d.c. voltages

In the present work, tracking phenomena has been studied with silicone rubber material under the a.c. and d.c. voltages following IEC-587 standards. The surface condition of the tracked zone was analysed using wide angle X-ray diffraction (WAXD) and thermogravimetric differential thermal analysis (TG-DTA) studies. The tracking time was different for a.c. and d.c. voltages.     

Accommodation of a D-Phe residue into a right-handed 3(10)-helix: structure of Boc-D-Phe-(Aib)4-Gly-L-Leu-(Aib)2-OMe, an analogue of the amino terminal segment of antiamoebins and emerimicins

Recently an unstable trinucleotide CTG repeat, located within the 3' untranslated region of a gene on 19q13.3 was discovered in kindreds with myotonic dystrophy (DM). The age-of-onset/severity of DM shows a good correlation with CTG repeat size, and pedigrees and data reported to date have shown a striking trend toward amplification of the size of the CTG repeat during transmission from parent to child. The amplification has been accepted as the biological explanation for anticipation in the clinical severity observed in many families with DM. In this paper we report on 3 families where CTG amplification decreased during transmission from parent to child. In one case there was a gene conversion event, while in the remaining 2 there was a simpler reduction in the size of the repeat length. The changes appear to have been accompanied by a reduction in clinical severity in the child when compared to the parent. These observations are discussed in terms of their clinical implications and the biases that may exist in much of the reported data.     

One-step oxidation of cyclohexane to adipic acid

Liquid-phase oxidation of cyclohexane with Co(III) catalyst and gaseous oxygen was found to be influenced by reaction temperature, catalyst concentration and the duration. Maximum adipic acid product selectivity (77%) with about 85% cyclohexane conversion was attained at 100°C using catalyst: cyclohexane molar ratio 0·08. Under these conditions more than 80% cyclohexane was converted in the first hour, although selectivity to adipic acid continued to increase for the next 5 h. Cyclohexyl acetate and cyclohexyl monoadipate were identified as important intermediates. This study supports the mechanism proposed by Schultz, J. G. D. and Opchenko, A., J. Org. Chem., 38 (21) (1973) 3729.     

Transport properties in a mixed inorganic ion exchanger—zirconium phosphomolybdate—in comparison to its single salt counterparts

Amorphous inorganic ion exchangers zirconium phosphate, zirconium molybdate and zirconium phosphomolybdate have been prepared and characterized by elemental analysis, TGA, FTIR and surface area measurements. The protonic conductivity in these materials were determined at various temperatures and compared. It was found that the mixed material zirconium phosphomolybdate showed maximum conductivity at all temperatures.     

The beneficial effect of small amount of water in the ambient temperature atom transfer radical homo and block co-polymerization of methacrylates

ATRP of several methacrylates viz. methyl methacrylate (MMA), ethyl methacrylate (EMA), n-butyl methacrylate (nBMA), t-butyl methacrylate (tBMA), benzyl methacrylate (BzMA) and (N,N-dimethylamino)ethyl methacrylate (DMAEMA) has been studied in neat as well as aqueous (up to 12 vol% water) acetone at 35 °C using CuCl/bipyridine (bpy) catalyst and ethyl 2-bromoisobutyrate as the initiator. Addition of water significantly enhances the rate of polymerization without losing control. Unlike CuCl/bpy the CuBr/bpy catalyst gives poor control which is attributed to the lower solubility and consequent heterogeneity in the latter case. Of the other ligands used with the CuCl catalyst viz. o-phenanthroline (o-phen), 1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA), 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA), Me₆TREN only o-phen offers reasonably good control. The CuCl/bpy catalyst system has been used also in preparing some di- and tri-block copolymers with reasonably low polydispersity index (PDI) at ambient temperature (35 °C) using aqueous acetone as the solvent. The following block copolymers have been prepared PMMA-tBMA, PMMA-b-tBMA-b-MMA, PMMA-DMAEMA, by this method.     

Purity of Aluminum Hydroxide Derived from Triethylaluminum

Aluminum hydroxide obtained by hydrolysis of triethylaluminum is free of uranium and thorium at detection limits of 1 to 9 parts per billion (ppb). Other impurities commonly associated with aluminum oxides are present at low levels (Fe, ∼ 1 ppm; Si, 3 to 6 ppm). When the organoaluminum is intentionally contaminated with an iron salt, purity is restored by a simple distillation.     

Ageing studies of pineapple leaf fiber–reinforced polyester composites

This experimental study evaluated the water absorption characteristics of pineapple leaf fiber (PALF)–polyester composites of different fiber content. The degree of water absorption was found to increase with fiber loading. The mechanism of diffusion was analyzed and the effect of fiber loading on the sorption kinetics was studied. The diffusion coefficient was calculated and found to increase with fiber content. Studies were also made to correlate water absorption with the cross‐sectional areas of the specimens. The effects of ageing on the tensile properties and dimensional stability of PALF polyester composites were studied under two different ageing conditions. Ageing studies showed a decrease in tensile strength of the composites. The composite specimens subjected to thermal ageing showed only a slight deterioration in strength. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 503–510, 2004     

Metallo-organic deposition of tungsten oxide films from alkylammonium tungstate solutions

This paper describes a simple and inexpensive metallo-organic deposition (MOD) process for forming electrochromic tungsten oxide (WO₃) films on glass. The thin films of WO₃ were made by air firing (500–700°C) films from xylene/2-propanol solutions of bis-(di-n-octylammonium) tetratungstate, [(n-C₈H₁₇)₂NH₂]₂[W₄O₁₃]. The process coats glass with undoped films ranging in colour from faint yellow to dark brown, and can be used to make gradients of these colours. The colour is determined by the firing parameters and results from residual carbon and tungsten suboxides in the film due to incomplete firing. Increased firing temperatures or longer firing times removes the carbon and produces films with higher crystallinity. Electrochemical doping with acid (H⁺) switches the colour gradient films to a uniformly blue colour.     

Enhancing diamond drilling performance by the addition of non-ionic polymer to the flushing media

Drilling is a most important and crucial operation in the excavation industries.With the objective of looking into the enhancement of diamond drilling performance detailed laboratory investigations were carried out on phosphate rock.The effect of Poly (Ethylene Oxide) (PEO) added to the drilling water was studied by varying machine parameters and PEO concentration.The responses were rate of penetration and torque at the bit rock interface.Slake durability tests were also performed to understand the slaking behavior of phosphate rock in PEO solutions.