Conjugated Linoleic Acid Concentrations in Dairy Products as Affected by Processing and Storage

Total conjugated linoleic acid (CLA) concentrations increased 1.32 fold in salted and 1.27 in unsalted butter but did not alter the ratio of 9-cis 11-trans to total CLA. Nonfat yogurt showed an increase in CLA content with processing (5.25 mg total CLA/g fat) compared to unprocessed raw material (4.40 mg CLA/g fat). No changes in CLA content was observed in processed dairy products such as lowfat yogurt, regular yogurt, lowfat and regular ice cream, sour cream or cheeses such as Mozzarella, Gouda and Cheddar. Storage did not affect CLA concentration in any products suggesting that CLA is a stable component.     

APPLICABILITY OF ALGINATE ENTRAPPED YEAST CELLS FOR THE PRODUCTION OF LACTOSE-HYDROLYZED MILK

To overcome the problem of enzyme extraction and poor permeability of cell membrane to lactose, permeabilized Kluyveromyces marxianus NCIM 3465 cells as a source of β‐D‐galactosidase were employed for the production of lactose‐hydrolyzed milk. In view of the advantages of an immobilized cell system over a free cell system, the yeast cells were entrapped in alginate gel for their subsequent use in lactose hydrolysis. Different process parameters (alginate concentration, bead size, biomass load, temperature, agitation and incubation time) were monitored to enhance lactose hydrolysis in milk. Maximum lactose hydrolysis (87.9%) was observed with yeast cells immobilized in 2% (w/v) alginate concentration with a bead size of 2.90 mm at 30C under agitation (80 rpm) after 150 min of incubation. The developed system was highly stable and the alginate entrapped yeast cells can be recycled up to the eight cycle without any marked change in their ability to carry out the lactose hydrolysis.     

Electrical and microstructural properties of CaTiO3-doped K1/2Na1/2NbO3-lead free ceramics

Microstructure, electrical properties and dielectric behaviour of K_1/2Na_1/2NbO₃ (KNN) and CaTiO₃-modified K_1/2Na_1/2NbO₃ (CTO-KNN) systems, were investigated. Discs doped with 0 to 0·55% mol of CaTiO₃ (CTO) were sintered at 1125°C for 2 h. Although minority phases were found in doped samples, CaTiO₃ was not detected. It was also observed that CTO changed the microstructure and grain size of KNN drastically. Also, the Curie temperature and permittivity values decreased. Addition of CTO between 0·15 and 0·45 mol% decreases the density and dielectric values. Samples prepared with higher content of CTO than 0·45 mol% showed better electrical properties.     

Stannous-Stannic Equilibrium in Molten Binary Alkali Silicate and Ternary Silicate Glasses

The stannous-stannic equilibrium in binary alkali silicate and ternary silicate glasses was studied by equilibrating glassmelts with air at 1400°C. The Sn²⁺-Sn⁴⁺ equilibrium shifts more toward the oxidized state with increasing ionic radii of the alkali ions or with increasing concentration of the alkali ions in the same series of glasses. The slope of the straight lines obtained on plotting log (Sn⁴⁺)/(Sn²⁺)( pO₂ )^n/2 vs mol% R₂O increased in the order Li→Na→K. In ternary silicate glasses having the base glass composition 20Na₂O·10RO·70SiO₂, the Sn²⁺-Sn⁴⁺ equilibrium shifts more toward the reduced state, with increasing bond strength between the divalent cations and the nonbridging oxygens. With increasing temperature, the equilibrium shifts more toward the reduced state.     

Phase Diagrams for the Systems MgCl2-MgF2, CaCl2-MgF2, and NaCl-MgF2

Equilibrium phase diagrams for the systems MgCl₂-MgF₂, CaCl₂-MgF₂ and NaCl-MgF₂ were determined by differential thermal analysis, thermal analysis, and temperature-composition equilibrium techniques. Simple eutectics were observed at 78.0±0.5 mol% MgCl₂ and 628°±2°C in the MgCl₂-MgF₂ system, at 87.5±0.5 mol% CaCl₂ and 694°±2°C in the CaCl₂-MgF₂ system, and at 95.5±0.5 mol% NaCl and 786°±3°C in the NaCl-MgF₂ system. The phase diagrams determined for these systems were compared with phase diagrams that were computed using Temkin's model. The phase diagrams of the CaCl₂-MgF₂ and NaCl-MgF₂ systems were also compared with diagrams that were computed using the expression suggested by Flood et al. for reciprocal systems. The experimentally determined and computed phase diagrams agreed for the MgCl₂-MgF₂ system but not for the CaCl₂-MgF₂ and NaCl-MgF₂ systems.     

Reline低熔溶剂中铝纳米颗粒和叶状显微组织的电化学形核和长大:温度和工作电极角速度的影响

利用电化学和表面表征技术,研究在不同温度和工作电极角速度(ω)下,含Al(III)离子的Reline低共熔溶剂中铝在玻碳电极上形核和长大的电化学行为.结果表明,随着温度的升高,Al(III)DES的还原发生在较低的负电位,而此时伏安图中的电流峰增大,这对Al沉积动力学和热力学条件有利.实际上,由于Al被Al(OH)3(...     

Performance analysis of flexible workcentres using multiqueue models

We construct a multiqueue model of high fidelity for detailed performance evaluation of flexible machine centres. These models permit one to represent part type specific demand, processing, and setup time values, and to obtain part type specific performance figures. We show through numerical examples that variabilities in system parameters can induce paradoxical system behaviour. We also present an enhanced model which concerns a workpiece undergoing several operations at the work centre, and its application to evaluate alternative schedul ing strategies.