Simultaneous accommodation of Dy3+ at the lattice site of β-Ca3(PO4)2 and t-ZrO2 mixtures: Structural stability,mechanical, optical,and magnetic features

Structurally stable β-Ca₃(PO₄)₂/t-ZrO₂ composite mixtures with the aid of Dy³⁺ stabilizer were accomplished at 1500°C. The precursors comprising Ca²⁺, P⁵⁺, Zr⁴⁺, and Dy³⁺ have been varied to obtain five different combinations. The results revealed the fact that complete phase transformation of calcium-deficient apatite to β-Ca₃(PO₄)₂ occurred only at 1300°C, whereas the evidence of t-ZrO₂ crystallization is obvious at 900°C. The dual occupancy of Dy³⁺ at β-Ca₃(PO₄)₂ and t-ZrO₂ structures was evident; however, Dy³⁺ initially prefers to occupy β-Ca₃(PO₄)₂ lattice until its saturation limit and thereafter accommodates at the lattice site of ZrO₂. The typical absorption and emission behavior of Dy³⁺ were noticed in all the systems and, moreover, the surrounding symmetry of Dy³⁺ domains has been determined from the luminescence study. All the systems ensured paramagnetic response that is generally contributed by the presence of Dy³⁺. A gradual increment in the phase content of t-ZrO₂ in the composite mixtures ensured a significant improvement in the hardness and Young's modulus of the investigated compositions.     

An Overview of Next-Generation Androgen Receptor-Targeted Therapeutics in Development for the Treatment of Prostate Cancer

Traditional endocrine therapy for prostate cancer (PCa) has been directed at suppression of the androgen receptor (AR) signaling axis since Huggins et al. discovered that diethylstilbestrol (DES; an estrogen) produced chemical castration and PCa tumor regression. Androgen deprivation therapy (ADT) still remains the first-line PCa therapy. Insufficiency of ADT over time leads to castration-resistant PCa (CRPC) in which the AR axis is still active, despite castrate levels of circulating androgens. Despite the approval and use of multiple generations of competitive AR antagonists (antiandrogens), antiandrogen resistance emerges rapidly in CRPC due to several mechanisms, mostly converging in the AR axis. Recent evidence from multiple groups have defined noncompetitive or noncanonical direct binding sites on AR that can be targeted to inhibit the AR axis. This review discusses new developments in the PCa treatment paradigm that includes the next-generation molecules to noncanonical sites, proteolysis targeting chimera (PROTAC), or noncanonical N-terminal domain (NTD)-binding of selective AR degraders (SARDs). A few lead compounds targeting each of these novel noncanonical sites or with SARD activity are discussed. Many of these ligands are still in preclinical development, and a few early clinical leads have emerged, but successful late-stage clinical data are still lacking. The breadth and diversity of targets provide hope that optimized noncanonical inhibitors and/or SARDs will be able to overcome antiandrogen-resistant CRPC.     

Design and analysis of text document clustering using salp swarm algorithm

The Journal of Supercomputing - In the technological era, exponential increase of unorganized text documents offers increased difficulties retrieving the most relevant data. The document clustering...     

Biosynthesised silver and copper nanoformulation as foliar spray to control bird's eye spot disease in tea plantations

Tea leaves have economic importance in preparation of the popular beverage of the world “tea”. Bird’s eye spot disease of tea leaves creates significant revenue loss in tea trade of many tea plant cultivating countries. Management of this disease by silver (AgNps) and copper (CuNps) nanoparticles that are biosynthesised by efficient antagonists was studied. The biocontrol agents like Pseudomonas fluorescens, Trichoderma atroviride and Streptomyces sannanensis were evaluated for nanoparticle synthesis against Cercospora theae isolates namely KC10, MC24 and VC38. Initially, the freshly prepared extracellular AgNps showed high disease control (59.42 – 79.76%), but the stability of antagonistic property in stored nanoparticles were significantly high in CuNps (58.71 – 73.81%). Greenhouse studies on various treatments imposed also showed reduced disease incidence percentage of 13.4, 7.57 and 10.11% when treated with CuNps synthesized by P. fluorescens, T. atroviride and S. sannanensis respectively. Various treatment schedule in fields suggested the use of Bionanocopper@1.5 ppm for highest yield (3743 kg/ha) with 66.1% disease prevention. The results suggest the use of biosynthesised CuNps using Streptomyces sannanensis for controlling the tea plant pathogens causing foliar disease with higher stability in releasing the antagonistic activity during sporadic disease incidence of bird’s eye spot disease in tea plants.Inspec keywords: silver, copper, crops, plant diseases, nanoparticles, air pollution, agrochemicals, nanobiotechnologyOther keywords: biosynthesised silver, biosynthesised copper, nanoformulation, foliar spray, bird eye spot disease control, tea plantations, tea leaves, economic importance, revenue loss, tea trade, tea plant cultivating countries, silver nanoparticles, AgNps, copper nanoparticles, CuNps, biocontrol agents, nanoparticle synthesis, Cercospora theae isolates, KC10, MC24, VC38, greenhouse studies, antagonistic property, P. fluorescens, T. atroviride, S. sannanensis, fungicides, synthetic nanomaterials, bionanomaterials, disease prevention, green leaf yield, BionanoCu, tea plant pathogens, foliar disease     

Antioxidant effect of turmeric powder,nitrite and ascorbic acid on stored chicken mince

This investigation was carried out to evaluate the antioxidant effect of turmeric (turmeric 1000 ppm, turmeric 5000 ppm), nitrite (nitrite 200 ppm) and ascorbic acid (ascorbic acid 500 ppm) on raw minced chicken stored at 4 ± 1 °C. Physicochemical properties [pH, water activity, cooking loss, thiobarbituric acid (TBA) value, peroxide value (PV), free fatty acid (FFA)] were evaluated on 0, 2, 4 and 6th day of storage. Highly significant differences (P < 0.01) in pH, TBA value, PV and FFA value were noticed between treatments and between storage periods. TBA values were observed to be lowest for nitrite 200 ppm and then turmeric 5000 ppm, and there was no significant difference between nitrite 200 ppm and turmeric 5000 ppm, and both were superior to ascorbic acid 500 ppm and turmeric 1000 ppm. Among different treatments, PV was found to be lowest in turmeric 5000 ppm and highest in nitrite 200 ppm. FFA value was found to be lowest in turmeric 5000 ppm and highest in ascorbic acid 500 ppm among all treated samples. It can be concluded that turmeric has potential to replace synthetic antioxidants presently used in meat processing with many added advantages.     

Effect of microstructure on oxygen permeation in SrCo0.8Fe0.2O3−δ

The effect of microstructure on oxygen permeation in SrCo0.8Fe0.2O3– membranes was investigated using disc samples fabricated under different processing conditions of applied pressure and sintering temperature. The average grain size of the samples was found to remain unchanged as a function of applied pressure, but increased considerably when the sintering temperature was increased from 950 to 1200°C. This change in grain size has a strong effect on the oxygen permeation flux, which increased considerably as the grain size was decreased. The density as well as the microhardness of these samples were also measured and found to change slightly as the processing conditions were changed.     

Preparation and characterization of poly(ethylene/tetramethylene terephthalate) copolyesters

Random copolyesters were prepared from dimethyl terephthalate (DMT), ethylene glycol (EG) and butane 1,4-diol (BD) by melt-polycondensation techniques, using varying amounts of EG and BD. Compositions have been established by ¹H n.m.r. spectroscopy. Intrinsic viscosity and number average molecular weight ($\text{M}\text{?}{}_{\mathrm{n}}$) were measured. Thermal properties have been studied by differential thermal analysis. Melting and crystallization temperatures and thermodynamic parameters are discussed in terms of structural differences, particularly the effect of composition and chain flexibility. The degree of crystallinity from differential thermal analysis, i.r. and wide angle X-ray scattering (WAXS) are discussed.     

Estimation of magnetohydrodynamic radiative nanofluid flow over a porous non‐linear stretching surface: application in biomedical research

The present study investigates the effects of thermal radiation and chemical reaction on magnetohydrodynamic flow, heat, and mass transfer characteristics of nanofluids such as Cu–water and Ag–water over a non‐linear porous stretching surface in the presence of viscous dissipation and heat generation. Using similarity transformation, the governing boundary layer equations of the problem are transformed into non‐linear ordinary differential equations and solved numerically by the shooting method along with the Runge–Kutta–Fehlberg fourth–fifth‐order integration scheme. The influences of various parameters on velocity, temperature, and concentration profiles of the flow field are analysed and the results are plotted graphically. A backpropagation neural network is applied to predict the skin friction coefficient, Nusselt number, and Sherwood number and these results are presented through graphs. The present numerical results are compared with the existing results and are found to be in good agreement. The results of artificial neural network and the obtained numerical values agree well with an error <5%.Inspec keywords: silver, copper, transforms, nanofluidics, friction, backpropagation, heat radiation, water, external flows, partial differential equations, nonlinear differential equations, boundary layers, Runge‐Kutta methods, mass transfer, flow through porous media, magnetohydrodynamicsOther keywords: magnetohydrodynamic radiative nanofluid flow, nonlinear stretching surface, biomedical research, thermal radiation, chemical reaction, magnetohydrodynamic flow, nonlinear porous stretching surface, viscous dissipation, similarity transformation, governing boundary layer equations, nonlinear ordinary differential equations, shooting method, Runge–Kutta–Fehlberg fourth–fifth‐order integration scheme, flow field, backpropagation neural network, Cu–water nanofluid, Ag–water nanofluid, skin friction coefficient, Nusselt number, Sherwood number, artificial neural network, Ag‐H₂ O, Cu‐H₂ O     

Amino‐functionalised mesoporous silica microspheres for immobilisation of Candida antarctica lipase B – application towards greener production of 2,5‐furandicarboxylic acid

In the present study, amino‐functionalised mesoporous silica microspheres were utilised as support for the covalent immobilisation of Candida antarctica lipase B (CaLB) for the subsequent production of 2,5‐furandicarboxylic acid (FDCA) from 2,5‐diformylfuran (DFF). Under the optimised operating conditions of pH 6.5, particle/enzyme ratio of 1.25:1.0 and glutaraldehyde concentration of 4 mM, a maximum CaLB immobilisation yield of 82.4% on silica microspheres was obtained in 12.25 h. The immobilised CaLB was used for the synthesis of alkyl esters, which were utilised along with hydrogen peroxide for FDCA synthesis. The biocatalytic conversion of 30 mM DFF dictated a 77–79% FDCA in 48 h at 30°C; where the turnover number and turnover frequency of immobilised CaLB were 6220.73 mol mol⁻¹ and 129.59 h⁻¹, respectively, for ethyl acetate, against 6297.65 mol mol⁻¹ and 131.2 h⁻¹, respectively, for ethyl butyrate. Upon examining the operational stability, the immobilised CaLB exhibited high stability till five cycles of FDCA production.Inspec keywords: mesoporous materials, organic compounds, biotechnology, silicon compounds, renewable materials, catalysis, catalysts, enzymes, thermal stability, biofuelOther keywords: FDCA production, amino‐functionalised mesoporous silica microspheres, greener production, 2,5‐furandicarboxylic acid, covalent immobilisation, 2,5‐diformylfuran, CaLB immobilisation, Candida antarctica lipase B immobilisation, ethyl butyrate, time 48.0 hour, temperature 30.0 degC, time 12.25 hour