Evaluation of myocardial damage using 123I-BMIPP imaging in patients with vasospastic angina

The purpose of this study is to determine whether left ventricular dysfunction following coronary artery spasm by 123I-BMIPP myocardial imaging. To reveal the clinical efficacy of 123I-BMIPP SPECT, 20 patients with vasospastic angina were studied using resting, 3-hour delayed image with 123I-BMIPP and exercise, 3-hour delayed image with 201Tl SPECT. 123I-BMIPP uptake was decreased compared to 201Tl (discordant) in 12 patients (60%) and in 49/100 myocardial segments (49%). The extent and severity score in resting image with 123I-BMIPP were significantly larger than that in delayed image with 201Tl (p < 0.01). In 123I-BMIPP SPECT, the severity score in the latest ischemia were significantly larger than that in others. The incidence of a complete agreement of decreased 123I-BMIPP uptake and coronary artery spasm was significantly higher (75%) than that in 201Tl (28%, p < 0.01). Furthermore, compared to 201Tl uptake, decreased 123I-BMIPP uptake much more corresponded to reduced wall motion in 9 of patients with mismatching. The severity of regional wall motion abnormality was significantly correlated with severity score of 123I-BMIPP. Late redistribution in delayed image with 123I-BMIPP was seen in 6 patients. The regional washout rate and the severity of regional wall motion abnormality in 6 patients was significantly lower than that in others (p < 0.05). Thus, metabolic abnormality assessed by 123I-BMIPP is well associated with left ventricular asynergy and spastic region in patients with vasospastic angina. In conclusion, 123I-BMIPP SPECT may sensitively delineate the impaired myocardium following coronary artery spasm, and it is very useful in diagnosing and estimating the severity of vasospastic angina.     

Contact melting inside an elastic capsule

An approximate mathematical model of contact melting of an unfixed material in elastic cylindrical and spherical capsules is developed. Since the density of the solid is higher than that of the melt, the melting solid resides at the bottom supported by a thin layer of the generated, convecting, melt, and the capsule swells. The main characteristic scales and non-dimensional parameters, which describe the principal features of the melting process and the liquid flow, are found. Linearisation with regard to the Stefan number as well as the small difference between the densities of the solid and liquid enables us to derive a closed-form evolution equation for the motion of the solid, which also determines the melting rate. Numerical solution of the evolution equation shows that the swelling of the capsule during melting, which is caused by the decrease of the density during phase transition, leads to slowing down of the melting process. This effect is due to flattening of the lower surface of the capsule, which entails fall of the pressure along with thickening of the molten layer. The latter determines the decrease of the melting rate.     

Involvement of specific mechanism in plasmid DNA uptake by mouse peritoneal macrophages

Lamina-associated polypeptide (LAP)2, which directly interacts with B-type lamins and chromosomes, is an integral membrane protein specifically distributed along the inner nuclear membrane of the nuclear envelope. Multiple regions of its large nucleoplasmic domain promote this localization, including the first (residues 1-296) and the second (residues 298-409) halves of the LAP2 N terminus. The second half is involved in LAP2 association with the nuclear lamina [Furukawa, K., Panté, N., Aebi, U. & Gerace, L. (1995) EMBO J. 14, 1626-1636]. In this study to further define its role, we examined which domain of B-type lamin interacts with LAP2 by means of a binding assay with bacterially expressed proteins and a yeast two-hybrid system. We found that amino acids in the region of residues 78-258 of the lamin B1 rod domain directly bound with LAP2. The data suggest that LAP2 may modulate the assembly of nuclear lamins.     

Clonal composition of malignant fibrous histiocytoma: analysis by PCR-based assay of the human androgen receptor gene (HUMARA)

Poly(A)+ mRNA was isolated from leaves of potato plants (Solanum tuberosum L. cv. Desiree) according to standard protocols. This poly(A)+ mRNA was injected via glass microcapillaries into oocytes that were surgically removed from the African clawed toad Xenopus laevis. As a control, oocytes were either injected with H2O or remained untreated. Three days after injection the oocytes were analyzed by two electrode voltage clamping. Current voltage analysis revealed that a K+ channel from potato was functionally expressed in injected oocytes. The identity of this K+ channel was confirmed by its substrate specificity and a shift in the reversal potential. In particular, when the outside K+ concentration was increased the reversal potential of poly(A)+ injected oocytes shifted to more positive values. Furthermore, K+ outward currents declined when the outside K+ concentration was raised from 0.1 to 100 mM. Inward currents increased with an elevation of the K+ concentration. Several pharmaceuticals were tested for their potential to block this K+ channel. As a result, the channel was completely blocked by BaCl2. A three state reaction kinetic model was used to simulate the currents through the K+ transport protein as function of the extracellular K+ concentration. In particular, the simulation revealed current voltage relations that exactly matched the measured ones. Saturation of current voltage curves emerged from the simulation as a consequence of high extracellular potassium concentration.     

Solidification of coal fly ash using hydrothermal processing method

Solidification of Coal Fly-ash (CFA) has been carried out using a hydrothermal processing method. In the hydrothermal processing, the CFA was first compacted in a mold at 20 - 50 MPa, and then hydrothermally cured in an autoclave. The hydrothermal curing was performed at 150 – 250°C for 15 – 60 h. The experimental results showed that NaOH solution, Ca(OH)₂ content, compaction pressure, autoclave curing temperature and time significantly affected the strength of solidified bodies. The most important strength-producing constituent in the solidified bodies produced with CFA was tobermorite, or tobermorite-like calcium silicate hydrate. When the CaO/SiO₂ ratio of the starting material was close to 0.83, tobermorite readily formed and the formed tobermorite enhanced the strength of solidified bodies. The tensile strength determined by the Brazilian test reached more than 10 MPa under the hydrothermal processing. As such, the hydrothermal processing method may provide a high potential for recycling CFA on a large scale.     

Concrete — moisture

Engineer research associate Hiroshi Hashida of the Tokyo Institute of Technology and co-authors Kyouji Tanaka and Michio Koike present test results on moisture redistribution in concrete which will help practitioners to understand and overcome the problems this causes in applied finishes.     

Possibilities of the Formation of Enol-Ethers in Lignin by Soda Pulping

In the alkaline decomposition of a β-O-4 type lignin model compound (erythro-guaiacylglycerol-β-guaiacyl ether, compound 1), an isomeric pair of C₆C₂ enol-ether (2-methoxy-4-[2-(2-methoxyphenoxy)-vinyl]-phenol, compound 2) was detected as the main decomposition product with no trace of C₆C₃ enol-ether (4-[3-hydroxy-1-(2-methoxyphenoxy)-propenyl]-2-methoxy-phenol, compound 3) or other dimers. In contrast, compound 2 was not detected in the alkaline decomposition products of compound 3. Under alkaline conditions, the γ-hydroxymethyl group of compound 3 was reduced to form 2-methoxy-4-[1-(2-methoxyphenoxy)-propenyl]-phenol (compound 4). In the HSQC analysis of soda lignin, the formation of substructures of C₆C₂ type enol-ether (related to compound 2) was confirmed. However, no substructures related to compound 4, which could be formed if a substructure of C₆C₃ type enol-ether was formed under alkaline conditions, were detected. Therefore, it could be concluded that C₆C₃ type enol-ethers could not be intermediates of alkaline decomposition products of lignin.     

Intratumoral pharmacokinetics and in vivo gene expression of naked plasmid DNA and its cationic liposome complexes after direct gene transfer

The pharmacokinetic properties and gene expression of naked plasmid DNA and its cationic liposome complexes were studied after direct intratumoral injection. Using a Walker 256 tissue-isolated tumor perfusion system, we quantified the recovery of naked plasmid DNA and cationic liposome complexes in the tumor, leakage from the tumor surface, and the venous outflow after intratumoral injection. Approximately 50% of naked plasmid DNA had been eliminated from the tumor 2 h after injection, whereas more than 90% of plasmid DNA was retained in the tumor when it was complexed with cationic liposomes. However, the distribution of these complexes in the tumor was restricted to the tissue surrounding the injection site. Pharmacokinetic analysis of the venous outflow profiles suggested that the rate-limiting process that determines the retention of plasmid DNA in the tumor is transferred from the injection site in the tumor tissue and that complexation with cationic liposomes may retard this process. Furthermore, we examined the gene expression of chloramphenicol acetyltransferase DNA constructs (naked pCMV-CAT) and the corresponding cationic liposome [3-beta-(N-(N',N'-dimethylaminoethane)carbamoyl)cholesterol] complexes. A similar level of gene expression was observed in vivo after direct intratumoral injection of naked DNA and its cationic liposome complexes. In both cases, a great variation was observed between tumors, and localization of gene-transduced cells in the tumor tissue was limited to the area in the vicinity of the injection site. Thus, these pharmacokinetic and gene expression studies have demonstrated that cationic liposomes can enhance the retention of injected DNA in the tumor model, whereas cationic liposome complex does not necessarily improve gene expression because of its poor dissemination in this tumor. The present study also suggested that there is a need to control the behavior of the injected naked plasmid DNA and its cationic liposome complexes to ensure better distribution throughout the tumor.