Organic–silicate hybrid catalysts based on various defined structures for Knoevenagel condensation

Two types of organic–inorganic hybrid base catalysts are prepared. Organic-functionalized molecular sieves (OFMSs), particularly “amine-immobilized porous silicates”, are designed based on common idea to immobilize catalytic active sites on silicate surface. Silicate–organic composite materials (SOCMs), such as “ordered porous silicate–quaternary ammonium composite materials”, are the precursors of ordered porous silicates obtained during the synthesis. Both the OFMS and the SOCM are used as the catalysts for Knoevenagel condensation. Among the OFMSs, there is clear tendency that the use of molecular sieve with larger pore volume and/or surface area gives the product in higher yield. Aminopropylsilyl (AP)-functionalized mesoporous silicates such as AP-MCM-41 gives the product in high yield under mild conditions. No loss of activity is observed after repeated use for three times. The SOCMs are also active for the same reaction. The precursors of the mesoporous silicates are more active than those of microporous silicates. This material can be repeatedly used without significant loss of activity. High activity is not due to the leached species. The active sites of the SOCM catalysts are considered to be SiO⁻ moieties located on the pore-mouth. Activity of the SOCM increases when the reaction is carried out without solvent, whereas decrease in activity of the OFMS is observed in the solvent-free system.     

Simple Method for Measuring the Peroxide Value in a Colored Lipid

We developed a simple method for quantification of the peroxide value (PV) in colored lipids on the basis of the reaction between triphenylphosphine (TPP) and oxidized oil to afford triphenylphosphineoxide (TPPO). Diphenylphosphineoxide (DPPO) was employed as internal standard. The formed TPPO was analyzed by high-pressure liquid chromatography–UV spectroscopy with absorption at 260 nm. The conditions that gave the highest correlative calibration curve between the peak area on the chromatogram and peroxide value were identified: the optimum TPP–oxidized oil mix ratio, reaction temperature, and reaction time were found to be 2:1, 40 °C, and 30 min, respectively. Linear calibration curves, passing through the origin, were obtained for PV versus TPPO and TPPO versus DPPO. The quantification limit for this method was 2.01 pmol hydroperoxyl group, which corresponds to a PV value of 0.2 meq/kg in a 10-mg oil sample. This method was used to measure the PV in colored fats and oils or lipids extracted from dark meat and processed food containing a coloring agent. Though the official method could not measure the PVs in the colored lipids, the method proposed here, which uses an inexpensive chemical reagent and machine, could. The developed method could play an important role for food quality control.     

A case of hemophagocytic syndrome with severe liver injury manifestating adult Still''s disease

We investigated if complement-mediated enhancement of HIV infection occurs in peripheral blood mononuclear cells (PBMC). In 7 experiments, we evaluated the effect of human complement on HIVIIIB infection in vitro. We measured HIV antigen production on day 4 and found that pre-incubation of HIV with complement led to enhanced production of antigen with a median enhancement of 2.5-fold (range 1.1-6.8). This complement-mediated increase in antigen production was statistically significant (p < 0.02). Complement-mediated enhancement of HIV infection was also tested in CD4 cells enriched from PBMC, and CD4 cells persistently gave higher levels of infection enhancement than PBMC. Thus, CD4 cells appear to be sufficient for complement-mediated enhancement of HIV infection to occur. In addition, we tested if it was possible to detect complement-mediated enhancement of primary HIV isolates in PBMC. We tested 3 isolates and found only a minor effect on antigen production (median enhancement 1.2-fold, range 0.6-1.5). Furthermore, addition of HIV-specific antibodies in combination with complement resulted in enhanced antigen production in 2/3 sera tested. However, the combination of complement and antibodies resulted in only a minor increase in enhancement of HIV infection compared to that obtained with complement alone. Finally, we found evidence of complement-mediated enhancement of HIV infection in resting PBMC. In conclusion, we demonstrated that complement-mediated enhancement of HIV infection does occur in vitro in PBMC.     

Increased serotonin release across the coronary bed during a nonischemic interval in patients with vasospastic angina

BACKGROUND: Platelet activation and coagulation abnormality have been observed during coronary spasm. It is crucial whether platelet activation occurs even during a nonischemic period. HYPOTHESIS: This study was designed to determine whether platelets might be activated across the coronary bed during a nonischemic interval in patients with vasospastic angina. METHODS: Plasma levels of serotonin, 6-keto-prostaglandin F1 alpha, and catecholamines in the aorta and the coronary sinus were simultaneously measured in 16 patients with vasospastic angina and 13 control patients with nonischemic heart disease. RESULTS: None of these patients showed myocardial ischemia during sampling. The difference in transcardiac plasma levels of serotonin in patients with vasospastic angina was significantly higher than that in controls (1.48 +/- 1.08 ng/ml vs. 0.07 +/- 0.12 ng/ml, respectively, p < 0.001). Coronary sinus plasma norepinephrine levels in these two groups were almost the same (204.8 +/- 110.8 pg/ml vs. 190.4 +/- 131.6 pg/ml, respectively). The ratio of 6-keto-prostaglandin F1 alpha in the coronary sinus and the aorta was not different between the two groups (1.17 +/- 0.96 in patients with vasospastic angina vs. 1.15 +/- 0.68 in controls). CONCLUSIONS: These data suggest that platelet activation across the coronary bed should be ascribed to endothelial dysfunction. Lack of compensatory enhancement of prostacyclin production might be concerned with dysfunction of coronary endothelial cells in these patients.     

Usage of multisensory information in scientific data sensualization

Multisensory scientific data sensualization methods that utilize virtual reality technology permit the use of several human sensations, such as visual, acoustic, and tactile sensation to display numerical data. The purposes of multisensory data sensualization can be classified as follows: (a) representing the relationships between different kinds of data; (b) displaying data utilizing sensory integration; and (c) representing conditions using the compound image. By using multisensory information, computers increase the ability to express data. However, these methods lead us to the question of which sensation should be used to display data most effectively. In this study, a multisensory data sensualization environment was developed in which color, loudness, sound frequency, and air flow pressure could be used to display scientific data. In particular, a wind sensation display prototype using air flow pressure was developed to generate tactile sensation. A basic experiment was conducted on sensory interference when subjects used two kinds of sensations simultaneously. From these results, guidelines for the usage of multisensory information for each purpose is proposed.     

Nitrate and nitrite contents in vegetable juice, tea beverage and mineral water on the market

The contents of nitrate and nitrite in vegetable juice (n = 63), tea beverage (n = 12) and mineral water (n = 15) were measured. The mean contents of nitrate were 0.73 +/- 14.57 mg/100 g, 0.61 +/- 1.12 mg/100 g and 0.25 +/- 0.33 mg/100 g as NO3-, respectively. The contents of the nitrite were 0.03 +/- 0.05 mg/100 g, 0.02 +/- 0.01 mg/100 g and 0.001 +/- 0.001 mg/100 g as NO2-, respectively. The content of nitrate is high in some vegetable juices, and warnings may be necessary for people who drink them frequently.     

Fire Safety Performance of Japanese Traditional Wood/Soil Walls and Implications for the Restoration of Historic Buildings in Urban Districts

Grass-root research activities to clarify fire safety performance of Japanese traditional wooden construction are introduced. The activities aim to resolve conflict between the restoration of historic buildings and the reduction of risk and hazard of urban fires. Among various activities, scope and results of fire resistance tests on traditional soil wall assemblies supported by timber frame are reported in detail. The test results indicate an encouraging prospect for the rational fire safety assessment of historic buildings and further development of fire-safe traditional constructions for the restoration of historic buildings and historic urban districts.