Review: the latest advances in biomedical applications of chitosan hydrogel as a powerful natural structure with eye-catching biological properties

Journal of Materials Science - Chitosan is one of the natural cationic polymers with unique properties such as non-toxicity, biodegradability, biocompatibility, environmentally friendly that has...     

Signal Integrity: Fault Modeling and Testing in High-Speed SoCs

As we approach 100 nm technology the interconnect issues are becoming one of the main concerns in the testing of gigahertz system-on-chips. Voltage distortion (noise) and delay violations (skew) contribute to the signal integrity loss and ultimately functional error, performance degradation and reliability problems. In this paper, we first define a model for integrity faults on the high-speed interconnects. Then, we present a BIST-based test methodology that includes two special cells to detect and measure noise and skew occurring on the interconnects of the gigahertz system-on-chips. Using an inexpensive test architecture the integrity information accumulated by these special cells can be scanned out for final test and reliability analysis.     

The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

Study of the morphology and mechanical properties of polypropylene composites with silica or rice‐husk

The mechanical, morphological behavior and water absorption characteristics of polypropylene (PP) and silica, or PP and rice‐husk, composites have been studied. The silica used in this study as filler was a commercial type produced from soluble glass or rice husks. The compatibilizing effect of PP grafted with monomethyl itaconate (PP‐g‐MMI) and/or with vinyltriethoxysilane (PP‐g‐VTES) as polar monomers on the mechanical properties and water absorption was also investigated. In general, a high loading of the studied fillers in the polymer matrix increases the stiffness and the water absorption capacity. This effect is more noticeable in the tensile modulus of the PP/silica composite with PP‐g‐VTES as compatibilizer. However, the increase of the rice‐husk charge as a natural filler in the PP matrix decreases the stiffness, and in the presence of PP‐g‐MMI as compatibilizer in PP/rice‐husk, the tensile modulus and water absorption of the composite were improved. The better adhesion and phase continuity in the PP/silica and PP/rice‐husk composites with different compatibilizers was confirmed by the morphological study. Copyright © 2004 Society of Chemical Industry     

Cast titanium as implant material

The tissue response in rats to implants made of machined and cast titanium was evaluated after 1 and 12 weeks. The implants consisted of a circular plate portion, located in the abdominal wall, and a cylindrical rod portion protruding into the peritoneal cavity. The chemical and topographical surface properties of the two types of implants differed considerably. The implants with surrounding tissue were processed en bloc for light and electron microscopy. The bulk metal was removed by an electrochemical procedure which permitted the sectioning and evaluation of the intact implant-tissue interface. The general distribution of macrophages and fibroblasts was the same around the plate portion of both types of implants. Macrophages constituted the predominating cell type with the highest concentration in the innermost cell zone closest to the implant. The number of macrophages per section area was significantly higher around machined implants. Multinuclear giant cells, always located at the implant surface, were more frequent around cast implants. The majority of the intraperitoneal rod portions were partially (1 week) or completely (12 weeks) covered by tissue; partial or complete overgrowth of tissue was rare for machined rod portions. Imaging electron energy loss spectroscopy demonstrated the presence of titanium in macrophages in the peripheral part of the tissue capsule around cast, but not machined implants. We conclude that the tissue responses to the two types of titanium implants differed considerably in the two biological environments (soft tissue in abdominal wall; peritoneal cavity) examined and that the response in one environment does not predict the response in the other. We also believe that improvements have to be made in the casting procedure in order to reduce surface roughness and contamination before cast implants can be used in clinical applications.     

Imaging of the optic disc and retinal nerve fiber layer: the effects of age, optic disc area, refractive error, and gender.

We cross-sectionally examined the relationship between age, optic disc area, refraction, and gender and optic disc topography and retinal nerve fiber layer (RNFL) measurements, using optical imaging techniques. One eye from each of 155 Caucasian subjects (age range 23.0-80.8 y) without ocular pathology was included. Measurements were obtained by using the Heidelberg Retina Tomography (HRT), the GDx Nerve Fiber Analyzer, and the Optical Coherence Tomograph (OCT). The effects of age were small (R2 < 17%) and were limited to specific HRT, GDx, and OCT parameters. Disc area was significantly associated with most HRT parameters and isolated GDx and OCT parameters. Refraction and gender were not significantly associated with any optic disc or RNFL parameters. Although effects of age on the optic disc and RNFL are small, they should be considered in monitoring ocular disease. Optic disc area should be considered when cross-sectionally evaluating disc topography and, to a lesser extent, RNFL thickness.     

Seismic safety of lifelines—an optimum design method

Lifeline systems are vulnerable to two types of hazards arising from potential earthquake sources. These are the hazard of a fault-rupture strike on elements of a lifeline system and the hazard of overstress induced in different elements of the system because of the ground vibration. An optimum design method is presented in this paper for the design of a lifeline system for a maximum accepted probability of failure because of any of the two modes of failure. The method may be used to determine an optimum path between a number of fixed points which represent supply or demand stations in the system.