COLOR VISION SYSTEM FOR RIPENESS INSPECTION OF OIL PALM ELAEIS GUINEENSIS

In checking harvesting discipline and quality control for oil palm fruits, color has presumably been an important guide to whether the oil content has reached a maximum where the fruit bunch is ready for cutting. However, establishing a single and harmonious standard base on color is a very contentious issue in the oil palm industry because of the subjective nature of the human vision of color. This was further complicated due to the lack of information on fruit color upon which to base a definite ripeness criterion. We demonstrated in this paper that this problem can be solved using machine vision technology. Methods used were to treat color in HSI (Hue, Saturation and Intensity) color space and applied multivariate discriminant analysis. These have proven to be highly effective for color evaluation and image processing. The vision system was trained to classify oil palms into four quality grades according to PORIM (Palm Oil Research Institute of Malaysia) inspection standards. These are the unripe, the underripe, the optimally ripe and the overripe classes. Depending upon the quality feature evaluated, misclassification by the vision system varied from 5 to 12% but averaged at about 8%. Machine vision disagreement ranged from 2 to 19%.     

Effects of Gamma Irradiation on Proteins and Fatty Acids of Soybean

Two hundred grams of soybean seeds (moisture contents of 7.4, 15.3, 22.5, and 30.5%) were irradiated at dose levels of 0, 1, 5, 10, 20, 40, 60, 80 and 100 KGy using Cobalt-60 source. Radiation dose of 100 KGy caused a decrease in the percentage of nitrogen solubility from 80.3 to 67.2, 80.3 to 57.8, and 68.1 to 48.8 when deionized H₂O, 0.6M NaCl, and 0.2M Cacl₂ were used as solvents, respectively. Inhibition of 71% of lipoxygenase activities, 25.4% trypsin inhibitor activities, and 16.7% chymotrypsin inhibitor activities were found when the soybean seeds were irradiated at 100 KGy.     

Thermal induced transformations in glassy chalcogenides SixTe60−xAs30Ge10

Temperature-induced transformations are considered to be interesting characteristic properties of amorphous materials including the Si _x Te_60–x As₃₀Ge₁₀ system, withx=5, 10, 12 and 20. Density (), X-ray diffraction and differential thermal analysis (DTA) were used to characterize the compositions. DTA traces of each glass composition at different heating rates from 5 to 30° C min^–1 were obtained and interpreted. Fast and slow cooling cycles were used to determine the rate of structure formation. Cycling studies of materials show no memory effect but only ovonic switching action. The compositional dependence of the crystallization activation energy (E) and the coefficient of glass-forming tendency (K _gl) have been calculated. The thermal transition temperatures and associated changes in specific heat have been examined as a function of the Te/Si ratio by differential scanning calorimetry. It was found that andE increase linearly with increasing tellurium content, while the heat capacity (c _p) andK _gl, decrease with increasing tellurium content.E=1.54 eV andc _p=0.246 J g^–1 K^–1 forx=20 whileE=2.74eV andc _p=0.22 J g^–1 K^–1 forx=5.     

Effect of the Te/Si ratio on the electrical characteristics of the amorphous chalcogenide switches

The effect of composition on amorphous chalcogenide threshold switches of the system Si _x Te_60-x As₃₀Ge₁₀, wherex = 5, 10, 12 and 20, has been studied. The compositionx = 5 shows the best switching characteristics, e.g. the smallest holding voltage (V _h = 0.4V), the highest ON state current (I _h = 45A) and smallest threshold voltage (V _s = 1.5V). Applying the three mechanisms of conductance of Mottet al. (Phil. Mag. 37 (1975) 961), it is found that for a particular composition ₂ < ₁ < ₀ (the pre-exponential factors) andW ₂ < (E _a –E ₁ +W ₁) < (E _c –E _f) (whereE _a,E _c andE _e = activation energies at band edge, fermi level and conduction band;W ₁ andW ₂ = activation energy for hopping). It was found that the density of states at the fermi levelN(E _f) increases with the decrease of silicon content. The results provided further evidence against thermal interpretations and thereby support electronic models of threshold switching for these glass systems.     

Preparation and Characterization of Inorganic Organic Hybrid Material Based on TEOS/MAPTMS for Biomedical Applications

Silicon - In this study, inorganic-organic hybrid material consisting of tetraethyl orthosilicate (TEOS) and 3-methacryloxypropyl trimethoxysilane (MAPTMS) were prepared with sol-gel process and...     

Corrosion inhibition of triethanolammonium bromide mono- and dibenzoate as cationic inhibitors in an acidic medium

A weight loss technique was used to determine the corrosion inhibition efficiency of synthesized alkyl mono-and dibenzoate triethanolammonium bromide derivatives (TEAMB, TEADB) in an acidic medium (2 N HCl) at different doses (50, 100, and 200 ppm). The results showed that monoderivatives had a higher corrosion inhibition efficiency than diderivatives. The results were correlated with several factors, including the alkyl chain length of the hydrophobic chains, interfacial tension (IT), critical micelle concentration (CMC), and adsorption free energy of these inhibitors. Increasing the geometric length of the alkyl chains in the synthesized inhibitors had an increasing effect on their corrosion inhibition efficiency, whereas decreasing the CMC and IT had an increasing effect on their tendency toward corrosion inhibition. The number of hydrophobic chains attached to the inhibitor molecules had a vital influence on their efficiency as corrosion inhibitors.     

Sorption of uranium from waste effluent solutions by mesoporous carbon impregnated with trioctylamine

A new mesoporous adsorbent for uranium removal from waste effluents was prepared, characterized, and impregnated with trioctylamine. The adsorption efficiency was investigated as a function of pH, contact time, initial uranium concentration, competing ions, solid/liquid ratio, and temperature using batch sorption techniques. The maximum adsorption capacity was 21.9 mg g^–1 at pH 5. The equilibrium data fit well with the Langmuir adsorption isotherm. Kinetic study showed that the process was fast and reached equilibrium within 60 min. The kinetic data fit well with the pseudo-second-order law. Thermodynamic data show that the process is spontaneous and exothermic.     

Uranium extraction from nitric acid liquors using 4-methylpentan-2-one

Solvent extraction of uranium ions with 4-methylpentan-2-one was examined. The diluent, extractant concentration, aqueous to organic phase ratio, and contact time were varied. Different stripping agents were examined to reach the optimum stripping conditions. The results obtained show that uranium can be quantitatively extracted from 5 M nitric acid with 7% 4-methylpentan-2-one dissolved in refined kerosene and stripped from the organic phase with 5% Na₂CO₃. The equilibrium is attained within 10 min. Uranium can be efficiently separated from a large number of elements by adding EDTA salt to the stripping solution before uranium precipitation.