Comparison of yield and metabolites according to the types of hilling materials utilized during Glehnia littoralis sprout vegetable cultivation

Food Science and Biotechnology - Various hilling materials (rice hulls, pine sawdust, and perlite) were compared to produce sprout vegetables using beach silvertop (Glehnia littoralis Fr. Schm. ex...     

Monthly Joint Operations for the Nakdong Multi-reservoir System in Korea

Abstract

This study applies a state-of-art optimization technique, SSDP/ESP (Sampling Stochastic Dynamic Programming with Ensemble Streamflow Prediction), to derive a monthly joint operating policy for the Nakdong multi-reservoir system in Korea. A rainfall-runoff model, SSARR (Streamflow Synthesis And Reservoir Regulation), is linked to the SSDP/ESP model to provide ESP scenarios for runoff during the next month in the Nakdong River basin. The primary advantage of the SSDP/ESP is that it updates the derived operating policy as new ESP forecasts become available. Another SSDP model that employs historical runoff scenarios (SSDP/Hist) is also developed. The main difference between the two SSDP models is that SSDP/Hist is an off-line model whereas the SSDP/ESP is on-line. The developed operating policies are tested with a simulation model using an object-oriented simulation software, STELLA. The simulation results show that SSDP/ESP is superior to SSDP/Hist with respect to the water supply criterion, although both models perform similarly with respect to the hydroelectric energy production criterion.     

Thermal treatment effect on the magnetoelectric properties of (Ni0.5Zn0.5)Fe2O4/Pt/Pb(Zr0.3Ti0.7)O3 heterostructured thin films

Magnetoelectric (ME) property modulation in heterostructured (Ni_0.5Zn_0.5)Fe₂O₄/Pt/Pb(Zr_0.3Ti_0.7)O₃ (NZFO/Pt/PZT) thin films on platinized Si substrate by thermal annealing condition variation was studied. In an attempt to prevent interfacial reaction between NZFO and PZT layers during high temperature annealing, thin Pt layer was deposited which can serve as inter-diffusion barrier as well as electrode. The ferroelectric, magnetic, and ME properties of the heterostructured film were noticeably modulated due to microstructural evolution and clamping relaxation developed during thermal annealing process. Room temperature ME voltage coefficient of the heterostructured thin films was enhanced with increasing annealing temperature and reached to 29 mV/cm·Oe when annealed at 650 °C.     

Structural and piezoelectric properties of textured NLKNS-CZ thick films and their application in planar piezoactuator

0.97(Na_0.5-xLi_xK_0.5)(Nb_0.89Sb_0.11)O₃-0.03CaZrO₃ [(N_0.5-xL_xK)(NS)-CZ] piezoceramic (x = 0.325) has a pseudocubic-tetragonal-orthorhombic (PC-T-O) multi-structure. The PC structure formed in this piezoceramic was identified as the R3m rhombohedral structure. This piezoceramic showed the large piezoelectric charge constant (d₃₃) of 515 pC/N due to the PC-T-O multi-structure. The NaNbO₃ (NN) templates were used to texture the (N_0.5-xL_xK)(NS)-CZ thick films along the (001) direction, and the textured thick film (x = 0.0375) had a large Lotgering factor of 95.6%. The PC-T-O multi-structure was observed in this thick film (x = 0.0375), but the thick film (x = 0.0325) showed a PC-O structure owing to the diffusion of the NN templates into the thick film. The textured thick film (x = 0.0375) exhibited an increased d₃₃ of 625 pC/N because of the PC-T-O multi-structure and the lineup of grains along the [001] direction. A textured thick film (x = 0.0375) was used to fabricate a planar-type actuator to confirm its applicability to electrical devices. This actuator exhibits large acceleration (580.3 G) and displacement (150 μm) at a low electric field of 0.2 kV/mm with a short response time of 3.0 ms. Therefore, the (N_0.5-xL_xK)(NS)-CZ thick films are excellent lead-free piezoceramics.     

High-power piezoelectric energy harvester produced using [0 0 1]-textured (Na,K)NbO3-based lead-free piezoceramics

High-power piezoelectric energy harvesters (PEHs) require piezoceramics with a large k_p and d₃₃ but small ε^T₃₃/ε₀ values. The [0 0 1]-textured 0.96(Na, K)(Nb_1−xSb_x)–0.04SrZrO₃ piezoceramics (x = 0.025 and 0.045) exhibited the improved electromechanical coupling factor (k_p) and piezoelectric charge constant (d₃₃); however, the increase of dielectric constant (ε^T₃₃/ε₀) was not significant. Further, the textured piezoceramic with x = 0.045 shows the large d₃₃ × g₃₃ value of 21.5 pm²/N, where g₃₃ is piezoelectric voltage constant, indicating that texturing is a good technique to fabricate the piezoceramics for PEH. The impedance curve of the PEH consisting of the metal substrate and textured piezoceramic shows a piezoelectric resonance peak at a low frequency, which is the same as the mechanical resonance frequency of the PEH. Hence, the PEH can be considered a piezoelectric material. The figure of merit of the PEH was determined using the mechanical quality and electromechanical coupling factor calculated from the impedance curve of the PEH. A large power output of 1.7 mW was obtained from the type-1 PEH at the resonance frequency produced using the textured thick film (x = 0.045). Hence, this PEH can be used as a permanent power source for microelectronic devices in the Internet of Things.     

High strength nitrogen removal from nightsoil and piggery wastes.

Nightsoil and piggery wastes generally present high strength organics and nitrogen. This study evaluated the nitrogen removal characteristics with the existing and modified nightsoil and piggery waste treatment plants. The existing conventional plants showed 20 to 40% nitrogen removal, but the modification with SBR or MLE process could remove effectively both nitrogen and organics with the minimum COD/TN and alkalinity/TN ratios of 6 and 3.6, respectively. Nitrite nitrification and denitrification rates obtainable at higher nitrogen loads were faster than the rates of nitrate nitrification and denitrification resulting in less reactor volume requirement. However, the higher nitrogen loads increased the organic loads resulting in the reactor temperature inhibiting nitrification. Thus, a combined treatment with anaerobic digestion with the adjustment of influent bypass rates was proposed to reduce the reactor temperature and the external carbon requirement. The biological treatment could discharge about 1,100 mg/L soluble COD and 50 mg/L soluble nitrogen, respectively.     

Equalization digital on-channel repeater in the single frequency networks

Digital On-Channel Repeater (DOCR) can be used for Single Frequency Networks (SFN's). It is much simple and low cost compared to Distributed Transmitter which needs Studio to Transmitter Link (STL). However, traditional DOCR has one of those defects such as a power limit, a long time system processing delay or a poor output signal quality. In order to overcome all of those defects, we introduce Equalization DOCR (EDOCR) which regenerates the original 8-VSB output signal with relatively short time system processing delay. Lab. and Field test results show that the EDOCR can eliminate the loop-back signal up to 5.5 dB with 5.5 /spl mu/s system processing delay. By using EDOCR, we can save spectrum resources and extend coverage areas.     

New Insight into Microstructure Engineering of Ni-Rich Layered Oxide Cathode for High Performance Lithium Ion Batteries

Ni-rich layered LiNi_xCo_yMn_1−x−yO₂ (LNCM) with Ni content over >90% is considered as a promising lithium ion battery (LIB) cathode, attributed by its low cost and high practical capacity. However, Ni-rich LNCM inevitably suffers rapid capacity fading at a high state of charge due to the mechanochemical breakdown; in particular, the microcrack formation has been regarded as one of the main culprits for Ni-rich layered cathode failure. To address these issues, Ni-rich layered cathodes with a textured microstructure are developed by phosphorous and boron doping. Attributed by the textured morphology, both phosphorous- and boron-doped cathodes suppress microcrack formation and show enhanced cycle stability compared to the undoped cathode. However, there exists a meaningful capacity retention difference between the doped cathodes. By adapting the various analysis techniques, it is shown that the boron-doped Ni-rich layered cathode displays better cycle stability not only by its ability to suppress microcracks during cycling but also by its primary particle morphology that is reluctant to oxygen evolution. The present work reveals that not only restraint of particle cracks but also suppression of oxygen release by developing the oxygen stable facets is important for further improvements in state-of-the-art Li ion battery Ni-rich layered cathode materials.     

Cadmium in blood and hypertension

OBJECTIVES: This study is to examine the effect of cadmium exposure on blood pressure in Korean general population. METHODS: The study population consisted of 958 men and 944 women who participated in the 2005 Korean National Health and Nutrition Examination Survey (KNHANES), in which blood pressure and blood cadmium were measured from each participant. RESULTS: The mean blood cadmium level was 1.67 microg/L (median level 1.55). The prevalence of hypertension was 26.2%. The blood cadmium level was significantly higher among those subjects with hypertension than those without (mean level 1.77 versus 1.64 microg/dL). After adjusting for covariates, the odds ratio of hypertension comparing the highest to the lowest tertile of cadmium in blood was 1.51 (95% confidence interval 1.13 to 2.05), and a dose-response relationship was observed. Systolic, diastolic, and mean arterial blood pressure were all positively associated with blood cadmium level, and this effect of cadmium on blood pressure was markedly stronger when the kidney function was reduced. CONCLUSIONS: Cadmium exposures at the current level may have increased the blood pressure of Korean general population.