Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

Theoretical Investigation of Time Suboptimal Control of Industrial Manipulators Along Specified Paths

A method for the time suboptimal control of an industrial manipulator from an initial position and orientation to a final position and orientation as it moves along a specified path is proposed. Nonlinear system equations that describe the manipulator motion are linearized at each time step along the path. A method which gives the control inputs (joint angular velocities) for time suboptimal control of the manipulator is developed. In the formulation, joint angular velocity and acceleration limitations are also taken into consideration. A six degree of freedom elbow type manipulator is used in numerical examples to verify the method developed.     

A comparison of swarm-based optimization algorithms in linear antenna array synthesis

Today, the design of antenna arrays is very important in providing effective and efficient wireless communication. The purpose of antenna array synthesis is to obtain a radiation pattern with a low side lobe level (SLL) at a desired half power beam width in far-field. The amplitude and position values of the array elements can be optimized to obtain a radiation pattern with suppressed SLLs. In this paper, swarm-based metaheuristic algorithms including particle swarm optimization (PSO), artificial bee colony (ABC), mayfly algorithm (MA) and jellyfish search (JS) are compared to determine the optimal design of linear antenna arrays. Extensive experiments are conducted on designing 10-, 16-, 24- and 32-element linear arrays by determining the amplitude and positions. Experiments are repeated 30 times due to the random nature of swarm-based optimizers, and statistical results show that the performance of the novel algorithms, MA and JS, is better than that of the well-known PSO and ABC methods.

     

(BaTiO3)1-x + (Co0.5Ni0.5Nb0.06Fe1.94O4)x nanocomposites: Structure,morphology, magnetic and dielectric properties

Two phase-based nanocomposites consisting of dielectric barium titanate (BaTiO₃ or BTO) and magnetic spinel ferrite Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄ (CNNFO) have been synthesized through solid state route. Series of (BaTiO₃)_1-x + (Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄)_x nanocomposites with x content of 0.00, 0.25, 0.50, 0.75, and 1.00 were considered. The structure has been examined via X-rays diffraction (XRD) and indicated the occurrence of both perovskite BTO and spinel CNNFO phases in various nanocomposites. A phase transition from tetragonal BTO structure to cubic structure occurs with inclusion of CNNFO phase. The average crystallites size of BTO phase decreases, whereas that for the CNNFO phase increases with increasing x in various nanocomposites. The morphological observations revealed that the porosity is highly reduced, and the connectivity between grains is enhanced with increasing x content. The optical properties have been investigated by UV−vis diffuse reflectance spectroscopy. The deduced band gap energy (E_g) value is found to reduce with increasing the content of spinel ferrite phase. The magnetic as well as the dielectric properties were also investigated. The analysis showed that CNNFO ferrite phase greatly affects the magnetic properties and dielectric response of BTO material. The obtained findings can be useful to enhance the performances of magneto-dielectric composite-based systems.     

Topology optimization of a coupled thermal-fluid system under a tangential thermal gradient constraint

This paper presents a continuous adjoint approach for topology optimization of a coupled heat transfer and laminar fluid flow system under tangential thermal gradient (TTG) constraints. In this system, the thermal gradient along the boundary of multiple heat sources needs to be controlled. The design goals are to minimize the temperature of the domain, the fluid power dissipation and the TTG along the boundary of the heat sources. The first two goals are combined into a single cost function with weight variables. The TTG is constrained in one of two forms, an integral form where the integral of TTG squares along the boundaries of heat sources is constrained, or a point-wise form where TTG is constrained point-wise. A gradient-based approach is developed to obtain the optimized designs. A salient feature of our approach is the use of the continuous adjoint approach to derive gradients of both the cost function and two forms of TTG constraints. Numerical examples demonstrate that the continuous adjoint approach leads to successful topological optimization of the constrained thermal-fluid system. The use of TTG constraint is effective in lowering the TTG along the heat source boundaries. The resulting designs exhibit clear black/white contrast.     

Topology optimization of structures with integral compliant mechanisms for mid-frequency response

The purpose of this paper is to present a method for developing new truss-like sandwich structures that exhibit desirable mid-frequency vibratory characteristics. Specifically, a genetic algorithm optimization routine is used to determine candidate small scale structural topologies, i.e. unit cells, that may be used in the design of larger scale periodic sandwich structures. This multi-scale procedure is demonstrated starting with several unit cell topology optimization examples. From these examples a specific optimal unit cell is selected for further investigation and integration into a periodic sandwich beam. Computational results indicate that the proposed optimization approach is effective when used to design new structures for reduced mid-frequency vibratory response.     

Effect of magnetic field and temperature on the voltage-current characteristics of YBCO superconductor

Voltage-current characteristics of YBCO superconductor was studied under magnetic field up to 0.4 T at different temperatures below T_c. The critical temperature decreases and the transition width broadens under magnetic field. V-I data below T_c were fitted to a power law expression V I^(T,B) in which (T,B) is found to decrease with increase of magnetic field and temperature, gradually approaching unity as T approaches T_c, being independent of magnetic field. Similarly, (T,B) approaches unity as magnetic field increases being independent of temperature.     

A heavy-tailed empirical Bayes method for replicated microarray data

DNA microarray has been recognized as being an important tool for studying the expression of thousands of genes simultaneously. These experiments allow us to compare two different samples of cDNA obtained under different conditions. A novel method for the analysis of replicated microarray experiments based upon the modelling of gene expression distribution as a mixture of α-stable distributions is presented. Some features of the distribution of gene expression, such as Pareto tails and the fact that the variance of any given array increases concomitantly with an increase in the number of genes studied, suggest the possibility of modelling gene expression distribution on the basis of α-stable density. The proposed methodology uses very well known properties of α-stable distribution, such as the scale mixture of normals. A Bayesian log-posterior odds is calculated, which allows us to decide whether a gene is expressed differentially or not. The proposed methodology is illustrated using simulated and experimental data and the results are compared with other existing statistical approaches. The proposed heavy-tail model improves the performance of other distributions and is easily applicable to microarray gene data, specially if the dataset contains outliers or presents high variance between replicates.     

Mapping of groundwater potential zones in the Musi basin using remote sensing data and GIS

The objective of this study is to explore the groundwater availability for agriculture in the Musi basin. Remote sensing data and geographic information system were used to locate potential zones for groundwater in the Musi basin. Various maps (i.e., base, hydrogeomorphological, geological, structural, drainage, slope, land use/land cover and groundwater prospect zones) were prepared using the remote sensing data along with the existing maps. The groundwater availability of the basin is qualitatively classified into different classes (i.e., very good, good, moderate, poor and nil) based on its hydrogeomorphological conditions. The land use/land cover map was prepared for the Kharif season using a digital classification technique with the limited ground truth for mapping irrigated areas in the Musi basin. The alluvial plain in filled valley, flood plain and deeply buried pediplain were successfully delineated and shown as the prospective zones of groundwater.